You are successfully logged out of your my randstad account

You have successfully deleted your account

    Thank you for subscribing to your personalized job alerts.

    185 jobs found in Minnesota - Page 2

    Filter2
    Clear all
    Page 2
      • Albert Lea, Minnesota
      • Permanent
      • $21.00 - $27.00 per hour
      • 8:00 AM - 4:30 PM
      Works with engineers and production to develop new methods and procedures on assembling and field installation of new high-level equipment designs. Works with production personnel to optimize existing methods and procedures. Accomplishes various production assembly functions that are complicated or intricate. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Operates hand or power tools, or production equipment. Must have thorough understanding of part prints (tolerances, symbols, etc.), perform checks for quality of parts and make adjustments as required. Good communication skills, written and/or verbal, when corresponding with customers on field installations and service requirements.Responsibilities:Performs work as outlined on install or warranty work with efficiency and accuracy, in accordance with company standards. Diagnoses cause of any malfunction and performs repair. Communicates with production department to obtain needed parts. Saves and tags parts of the job if under warranty or if requested by the customer. Examines equipment to determine if further safety or service work is required or recommended. Communicates with customer immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. Documents all work performed and recommended on the repair. Cycles equipment to verify customers concern and after repairs to verify repairs corrected customers concerns. Reports machinery defects or malfunctions to supervisor and/or customer. Keeps shop area neat and clean. Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operates all tools and equipment in a safe manner. Reports any safety issues immediately to management.Working hours: 8:00 AM - 4:30 PMSkills:-Must have mechanical and equipment assembly aptitude. (welding and/or machining experience is a plus)-Must have good communication skills, problem solving skills and be well organized. -Must be able to work a flexible schedule as this position includes travel to customers? facilities.-Must be able to travel up to 50% of the time. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Perform math skills of addition, subtraction, multiplication, and division.-Knowledge of decimals, fractions, and metric/English conversions.-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.-Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture.Education:AssociateExperience:1-4 yearsQualifications:Degree, diploma or certificate in Industrial Maintenance or five years of installation/maintenance experience. Must have experience with electrical wiring and reading schematics for electrical, hydraulics and pneumatics. Knowledge of programming is a plus. Passing Drug ScreenPHYSICAL DEMANDS:The installation/service technician must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices Direct Hire with a 100% employee owned company that has been voted ?Best Place to Work? many times and has a great benefit package, including: Medical & Short-Term Disability- Low premium rates!HRA 100% Employer Contribution, helps pay medical deductible!Free Clinic For covered employees and their dependents!Long Term Disability & Life Insurance 100% Employer Paid!Personal Time Off - Vacation and Sick TimeTuition Reimbursement Up to $4,000 per year!Wellness Programs, Employee Assistance Programs, We Care Program, and more.Paid Holidays Eligible on 1st day of employment!401K and ESOP ? Stock ownership retirement funds are invested for you with no contribution from employee.Profit Sharing Share the companys profit!Clean and safe work environment. (MNSHARP Approved Worksites)Non-Union (Employee Owned)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Works with engineers and production to develop new methods and procedures on assembling and field installation of new high-level equipment designs. Works with production personnel to optimize existing methods and procedures. Accomplishes various production assembly functions that are complicated or intricate. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Operates hand or power tools, or production equipment. Must have thorough understanding of part prints (tolerances, symbols, etc.), perform checks for quality of parts and make adjustments as required. Good communication skills, written and/or verbal, when corresponding with customers on field installations and service requirements.Responsibilities:Performs work as outlined on install or warranty work with efficiency and accuracy, in accordance with company standards. Diagnoses cause of any malfunction and performs repair. Communicates with production department to obtain needed parts. Saves and tags parts of the job if under warranty or if requested by the customer. Examines equipment to determine if further safety or service work is required or recommended. Communicates with customer immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. Documents all work performed and recommended on the repair. Cycles equipment to verify customers concern and after repairs to verify repairs corrected customers concerns. Reports machinery defects or malfunctions to supervisor and/or customer. Keeps shop area neat and clean. Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operates all tools and equipment in a safe manner. Reports any safety issues immediately to management.Working hours: 8:00 AM - 4:30 PMSkills:-Must have mechanical and equipment assembly aptitude. (welding and/or machining experience is a plus)-Must have good communication skills, problem solving skills and be well organized. -Must be able to work a flexible schedule as this position includes travel to customers? facilities.-Must be able to travel up to 50% of the time. -Individuals will work near moving mechanical parts of machinery and electrically activated devices. -Perform math skills of addition, subtraction, multiplication, and division.-Knowledge of decimals, fractions, and metric/English conversions.-Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.-Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture.Education:AssociateExperience:1-4 yearsQualifications:Degree, diploma or certificate in Industrial Maintenance or five years of installation/maintenance experience. Must have experience with electrical wiring and reading schematics for electrical, hydraulics and pneumatics. Knowledge of programming is a plus. Passing Drug ScreenPHYSICAL DEMANDS:The installation/service technician must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices Direct Hire with a 100% employee owned company that has been voted ?Best Place to Work? many times and has a great benefit package, including: Medical & Short-Term Disability- Low premium rates!HRA 100% Employer Contribution, helps pay medical deductible!Free Clinic For covered employees and their dependents!Long Term Disability & Life Insurance 100% Employer Paid!Personal Time Off - Vacation and Sick TimeTuition Reimbursement Up to $4,000 per year!Wellness Programs, Employee Assistance Programs, We Care Program, and more.Paid Holidays Eligible on 1st day of employment!401K and ESOP ? Stock ownership retirement funds are invested for you with no contribution from employee.Profit Sharing Share the companys profit!Clean and safe work environment. (MNSHARP Approved Worksites)Non-Union (Employee Owned)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $19.00 - $22.00 per hour
      • 3:00 PM - 11:15 PM
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment.Responsibilities:Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.Fabricate components from blueprints and verbal instructions.Perform assignments in accordance with written quality procedures.Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.Ensure compliance to safety rules and procedures.Working hours: 3:00 PM - 11:15 PMSkills:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Education:High SchoolExperience:1-4 yearsQualifications:The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.Individuals will work near moving mechanical parts of machinery and electrically activated devices. Individuals are occasionally exposed to airborne particles. Perform math skills of addition, subtraction, multiplication, and divisionKnowledge of decimals, fractions, and metric/English conversionsParticipate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new weldersLift and position parts into fixturesEmployment is contingent upon the results of a pre-employment drug examination. Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualificatio
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment.Responsibilities:Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.Fabricate components from blueprints and verbal instructions.Perform assignments in accordance with written quality procedures.Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.Ensure compliance to safety rules and procedures.Working hours: 3:00 PM - 11:15 PMSkills:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Education:High SchoolExperience:1-4 yearsQualifications:The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.Individuals will work near moving mechanical parts of machinery and electrically activated devices. Individuals are occasionally exposed to airborne particles. Perform math skills of addition, subtraction, multiplication, and divisionKnowledge of decimals, fractions, and metric/English conversionsParticipate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new weldersLift and position parts into fixturesEmployment is contingent upon the results of a pre-employment drug examination. Direct Hire with a 100% employee owned company that has been voted Best Place to Work many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualificatio
      • Albert Lea, Minnesota
      • Permanent
      • $19.00 - $22.00 per hour
      • 6:00 AM - 2:15 PM
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment.Responsibilities:?Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.?Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.?Fabricate components from blueprints and verbal instructions.?Perform assignments in accordance with written quality procedures.?Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.?Ensure compliance to safety rules and procedures.Working hours: 6:00 AM - 2:15 PMSkills:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Education:High SchoolExperience:1-4 yearsQualifications:?The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.?The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.?Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.?Individuals will work near moving mechanical parts of machinery and electrically activated devices. ?Individuals are occasionally exposed to airborne particles.Perform math skills of addition, subtraction, multiplication, and division?Knowledge of decimals, fractions, and metric/English conversions?Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new welders?Lift and position parts into fixtures?Employment is contingent upon the results of a pre-employment drug examination. Direct Hire with a 100% employee owned company that has been voted ?Best Place to Work? many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and quali
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment.Responsibilities:?Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.?Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.?Fabricate components from blueprints and verbal instructions.?Perform assignments in accordance with written quality procedures.?Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.?Ensure compliance to safety rules and procedures.Working hours: 6:00 AM - 2:15 PMSkills:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Education:High SchoolExperience:1-4 yearsQualifications:?The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.?The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.?Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.?Individuals will work near moving mechanical parts of machinery and electrically activated devices. ?Individuals are occasionally exposed to airborne particles.Perform math skills of addition, subtraction, multiplication, and division?Knowledge of decimals, fractions, and metric/English conversions?Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new welders?Lift and position parts into fixtures?Employment is contingent upon the results of a pre-employment drug examination. Direct Hire with a 100% employee owned company that has been voted ?Best Place to Work? many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, Free Clinic, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and quali
      • Albert Lea, Minnesota
      • Temp to Perm
      • $16.00 per hour
      • 6:00 AM - 6:30 PM
      The Warehouse Operator is responsible for receiving shipments, shipping orders, repalletization, inventory control, and Master Sanitation Cleaning. Must be knowledgeable and comply with all Quality Control (QC), Quality Assurance (QA), and good manufacturing practices (GMPs).Responsibilities:?Operate forklift as per operation guidelines to include safety procedures and guidelines?Inventory control in D365; read and understand lot numbers and scales; ensure all paperwork is complete (including time cards) in an accurate and timely manner; ensure documentation complies with SECS standards?Keep a neat, clean, and orderly work setting by completing the cleaning tasks as assigned; complete the Master Sanitation Schedule as necessary?Observe safety and security procedures, determine appropriate action beyond guidelines, and report potentially unsafe conditions?Monitor product quality to meet Company standards; report to Supervisor any deviation from scheduling or quality of service that may become a potential liability?Report to your Supervisor any failure to adhere to the Corporation?s work ethics and standards?Perform other duties as assigned.?Adhere to all Company policies and procedures, i.e. personnel, safety, and equipment maintenance and upkeep?Become proficient in areas of production and safety policies and procedures (accident/injury reporting, blood borne pathogens, confined spaces, emergency evacuation, equipment operation/maintenance, hazard communication, ladders, lockout/tag out, personal protective equipment, etc.)Working hours: 6:00 AM - 6:30 PMSkills:--Computer literacy is required (prefer experience in warehouse inventory management systems, such as MRP/ERP)--Individual must be equipped with motivation, organization, time management, documentation, and communication skills (both orally and written)--Must have excellent attention to detail and have the ability to multi-task and prioritize--Individual should demonstrate work ethics (punctual, dependable, and trustworthy)--The ability to read and comprehend simple instructions, short correspondence, memos, and to write simple correspondence is also necessary--Individual must be able to pass any required examinations necessary to perform essential functions of the job--The ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization, as well as communicate and handle conflict in a professional manner is required--The ability to give and welcome feedback and contribute to building a positive team spirit is necessaryEducation:High SchoolExperience:0-1 yearsQualifications:?Individual will continually be required to stand, walk, use hands to finger, handle or feel, to talk and hear, and to utilize specific vision abilities including but not limited to close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus?Regularly required to climb, balance, stoop, kneel, crouch, and crawl, using proper ergonomic principles, taste, smell, and lift up to 25 pounds?Periodically required to lift up to and above 50 and 100 pounds, utilizing safe and proper lift techniques and equipment?Individual will rarely be required to sit?Individual will operate equipment, including but not limited to computers, drafting equipment and instruments involving scientific meters and measuring devices?The ability to distinguish colors is required?Requires anyone working in the plant or entering the plant must adhere to the personal protective equipment policies and procedures?All personal protective equipment furnished must be worn by all employees when required or needed to perform proper and safe working conditions?Individual may rarely be exposed to wet or humid conditions, working near moving mechanical parts, work in extreme heat (non-weather), work in high noise levels and vibration?Individual may also be periodically working in high or precarious places, fumes or airborne particles, toxic or caustic chemicals, outdoor weather conditions, and extreme cold (non-weather)Passing Drug Screen and Background Pre-Employment Screening Voted the Best Place to Work many years! TEMP-TO-PERMANENT POSITIONS! Once roll to Perm PAY IMMEDIATELY INCREASES by $1/HR plus AMAZING BENEFITS! Including: FREE On-Site Clinic, Medical, Dental, Vision, Life and Accidental Death & Disability, 401K, Employee Recognition Events, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The Warehouse Operator is responsible for receiving shipments, shipping orders, repalletization, inventory control, and Master Sanitation Cleaning. Must be knowledgeable and comply with all Quality Control (QC), Quality Assurance (QA), and good manufacturing practices (GMPs).Responsibilities:?Operate forklift as per operation guidelines to include safety procedures and guidelines?Inventory control in D365; read and understand lot numbers and scales; ensure all paperwork is complete (including time cards) in an accurate and timely manner; ensure documentation complies with SECS standards?Keep a neat, clean, and orderly work setting by completing the cleaning tasks as assigned; complete the Master Sanitation Schedule as necessary?Observe safety and security procedures, determine appropriate action beyond guidelines, and report potentially unsafe conditions?Monitor product quality to meet Company standards; report to Supervisor any deviation from scheduling or quality of service that may become a potential liability?Report to your Supervisor any failure to adhere to the Corporation?s work ethics and standards?Perform other duties as assigned.?Adhere to all Company policies and procedures, i.e. personnel, safety, and equipment maintenance and upkeep?Become proficient in areas of production and safety policies and procedures (accident/injury reporting, blood borne pathogens, confined spaces, emergency evacuation, equipment operation/maintenance, hazard communication, ladders, lockout/tag out, personal protective equipment, etc.)Working hours: 6:00 AM - 6:30 PMSkills:--Computer literacy is required (prefer experience in warehouse inventory management systems, such as MRP/ERP)--Individual must be equipped with motivation, organization, time management, documentation, and communication skills (both orally and written)--Must have excellent attention to detail and have the ability to multi-task and prioritize--Individual should demonstrate work ethics (punctual, dependable, and trustworthy)--The ability to read and comprehend simple instructions, short correspondence, memos, and to write simple correspondence is also necessary--Individual must be able to pass any required examinations necessary to perform essential functions of the job--The ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization, as well as communicate and handle conflict in a professional manner is required--The ability to give and welcome feedback and contribute to building a positive team spirit is necessaryEducation:High SchoolExperience:0-1 yearsQualifications:?Individual will continually be required to stand, walk, use hands to finger, handle or feel, to talk and hear, and to utilize specific vision abilities including but not limited to close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus?Regularly required to climb, balance, stoop, kneel, crouch, and crawl, using proper ergonomic principles, taste, smell, and lift up to 25 pounds?Periodically required to lift up to and above 50 and 100 pounds, utilizing safe and proper lift techniques and equipment?Individual will rarely be required to sit?Individual will operate equipment, including but not limited to computers, drafting equipment and instruments involving scientific meters and measuring devices?The ability to distinguish colors is required?Requires anyone working in the plant or entering the plant must adhere to the personal protective equipment policies and procedures?All personal protective equipment furnished must be worn by all employees when required or needed to perform proper and safe working conditions?Individual may rarely be exposed to wet or humid conditions, working near moving mechanical parts, work in extreme heat (non-weather), work in high noise levels and vibration?Individual may also be periodically working in high or precarious places, fumes or airborne particles, toxic or caustic chemicals, outdoor weather conditions, and extreme cold (non-weather)Passing Drug Screen and Background Pre-Employment Screening Voted the Best Place to Work many years! TEMP-TO-PERMANENT POSITIONS! Once roll to Perm PAY IMMEDIATELY INCREASES by $1/HR plus AMAZING BENEFITS! Including: FREE On-Site Clinic, Medical, Dental, Vision, Life and Accidental Death & Disability, 401K, Employee Recognition Events, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Temp to Perm
      • $17.50 per hour
      • 6:00 PM - 5:30 AM
      The Quality Assurance (QA) Technician supports manufacturing operations through carrying out activities to verify compliance with the site Quality Management System (QMS), Standard Operating Procedures (SOPs) and Product Specifications. They work with the cross-functional site team to meet or exceed the personnel safety, food safety, and food quality goals of the company. This position exemplifies a positive culture that encourages continuous improvement and collaboration.Responsibilities:?Performing daily tasks such as monitoring employee documentation, reporting of quality issues, verifying Critical Control Points, checking weights, calibrating scales, probes, thermometers, moisture analyzers, and other lab equipment, etc. ?Ensuring employee compliance with allergen procedures, GMP?s, SSOP?s and Food Safety Plan (HAACP)?Assisting in the performance of weekly environmental swabs and monthly plant, glass, brittle plastic, and ceramic inspections?Conducting Pre-Operational activities?Testing and evaluating raw material and finished product?Writing HOLD tags and assigning and/or assisting with the disposition of product?Reviewing finished production folders as part of the positive release program?Must maintain department safety rules compliance and be a positive safety role model. ?Responsible for ensuring an organized, clean and safe work environment.?Follow all Food safety practices and processes applicable to the department. ?Execute what is required by the company QMS.?Monitor and maintain all food safety activities as part of daily tasks.?Enforce food safety plan while producing product.?Promote food safety and quality to all departments?Support and assist the manufacturing teams to meet customer and product quality performance requirements. ?Implement department Quality Management Systems (QMS) requirements. Strive to promote a world-class Quality organization.?Effectively represent the quality team and QA issues to all internal and external customers in a timely manner.?Communicate non-conformances and lead root cause analysis investigations followed up by corrective actionWorking hours: 6:00 PM - 5:30 AMSkills:--Clear sense of urgency and ability to manage priorities to meet immediate needs and long-term goals.--Able to manage time and workload efficiently, and the ability to prioritize and modify priorities accordingly--Good safety, food-safety, and quality orientation and ability to promote these standards in a cross-functional environment.--Self-motivation and ability to work independently. Ability and willingness to provide support and training to employees on all shifts.--Able to troubleshoot and provide QA centered solutions in a cross-functional team environment and to lead a CAPA process.--Demonstrate ability to work and develop others in a team environment--Sensitive to other cultures/backgrounds, able to work in a multi-cultural workplace--Ability and willingness to learn, practice, and improve documented work procedures--Demonstrated ability to function in a fast-paced environment --Verbal and written communication skills sufficient to discuss, develop, and implement plans. --High sensitivity to quality and on time delivery of materials and servicesEducation:High SchoolExperience:0-1 yearsQualifications:?Experience with Microsoft Office, including Excel, Outlook, and Word ?Able to perform basic mathematical equations?Ability to adapt in a team and/or individual setting to allow achievement of company goals ?Established communication, problem solving, and attention to detail skills?Demonstrates punctuality and dependably in all aspects of work Ability to lift 50 lbs. and required to stand, walk, sit and reach with hands and arms.?Familiarity with SQF, FDA (FSMA), HACCP and other regulatory and industry guidelines and requirements?PCQI and HACCP certified desired Temp to PERM!!! Once roll to PERM, wages increase to $18.50/HR!! PLUS AMAZING BENEFITS that include FREE Well@Work Clinic, Medical, Dental/Vision Ins, Medical Flex Spending Pan, Dependent Care, PTO and Holiday Pay, Retirement 401K match, Life Ins, ?and MORE!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The Quality Assurance (QA) Technician supports manufacturing operations through carrying out activities to verify compliance with the site Quality Management System (QMS), Standard Operating Procedures (SOPs) and Product Specifications. They work with the cross-functional site team to meet or exceed the personnel safety, food safety, and food quality goals of the company. This position exemplifies a positive culture that encourages continuous improvement and collaboration.Responsibilities:?Performing daily tasks such as monitoring employee documentation, reporting of quality issues, verifying Critical Control Points, checking weights, calibrating scales, probes, thermometers, moisture analyzers, and other lab equipment, etc. ?Ensuring employee compliance with allergen procedures, GMP?s, SSOP?s and Food Safety Plan (HAACP)?Assisting in the performance of weekly environmental swabs and monthly plant, glass, brittle plastic, and ceramic inspections?Conducting Pre-Operational activities?Testing and evaluating raw material and finished product?Writing HOLD tags and assigning and/or assisting with the disposition of product?Reviewing finished production folders as part of the positive release program?Must maintain department safety rules compliance and be a positive safety role model. ?Responsible for ensuring an organized, clean and safe work environment.?Follow all Food safety practices and processes applicable to the department. ?Execute what is required by the company QMS.?Monitor and maintain all food safety activities as part of daily tasks.?Enforce food safety plan while producing product.?Promote food safety and quality to all departments?Support and assist the manufacturing teams to meet customer and product quality performance requirements. ?Implement department Quality Management Systems (QMS) requirements. Strive to promote a world-class Quality organization.?Effectively represent the quality team and QA issues to all internal and external customers in a timely manner.?Communicate non-conformances and lead root cause analysis investigations followed up by corrective actionWorking hours: 6:00 PM - 5:30 AMSkills:--Clear sense of urgency and ability to manage priorities to meet immediate needs and long-term goals.--Able to manage time and workload efficiently, and the ability to prioritize and modify priorities accordingly--Good safety, food-safety, and quality orientation and ability to promote these standards in a cross-functional environment.--Self-motivation and ability to work independently. Ability and willingness to provide support and training to employees on all shifts.--Able to troubleshoot and provide QA centered solutions in a cross-functional team environment and to lead a CAPA process.--Demonstrate ability to work and develop others in a team environment--Sensitive to other cultures/backgrounds, able to work in a multi-cultural workplace--Ability and willingness to learn, practice, and improve documented work procedures--Demonstrated ability to function in a fast-paced environment --Verbal and written communication skills sufficient to discuss, develop, and implement plans. --High sensitivity to quality and on time delivery of materials and servicesEducation:High SchoolExperience:0-1 yearsQualifications:?Experience with Microsoft Office, including Excel, Outlook, and Word ?Able to perform basic mathematical equations?Ability to adapt in a team and/or individual setting to allow achievement of company goals ?Established communication, problem solving, and attention to detail skills?Demonstrates punctuality and dependably in all aspects of work Ability to lift 50 lbs. and required to stand, walk, sit and reach with hands and arms.?Familiarity with SQF, FDA (FSMA), HACCP and other regulatory and industry guidelines and requirements?PCQI and HACCP certified desired Temp to PERM!!! Once roll to PERM, wages increase to $18.50/HR!! PLUS AMAZING BENEFITS that include FREE Well@Work Clinic, Medical, Dental/Vision Ins, Medical Flex Spending Pan, Dependent Care, PTO and Holiday Pay, Retirement 401K match, Life Ins, ?and MORE!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Temp to Perm
      • $16.00 per hour
      • 6:00 AM - 2:25 PM
      FLAVORING OPERATOR (Agglomeration) Training to be able to tend to fluid beds during the flavoring process of food ingredient powders.Responsibilities:?Basic mechanical aptitude by using machine specific tools.?Ability to work safely when learning the equipment and surroundings?Properly lock out and tag out equipment.?Good Manufacturing Practices (GMPs) and how to keep the product safe?Assist coworkers in loading product and packaging final product; able to assist in packaging line with boxes, bags or totes.?Learn how to tear down equipment for cleaning?Learning how to assemble the equipment?Setting flow rates and starting equipment?Keeping up with equipment and product when running.Working hours: 6:00 AM - 2:25 PMSkills:Able to read and comprehend simple instructions, short correspondence and memos. Able to write simple correspondence. Able to effectively present information in one-on-one and small group situations to customers, clients and other employees of the organization.Able to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Able to compute rate, ratio and percent and to draw and interpret bar graphs.Able to apply common sense understanding, to carry out detailed but uninvolved written or oral instructions. Able to deal with problems involving a few concrete variables in standardized situations.Basic Computer Skills.Education:High SchoolExperience:0-1 yearsQualifications:Less than high school education; or up to one month related experience or training; or equivalent combination of education and experience.Able to: Collect and research data. Demonstrate attention to detail. Identify and resolves problems in a timely manner. Communicates changes and progress. Respond promptly to customer needs. Read and interpret written information. Maintain confidentiality. Communicate with line employees and supervisor as to status of the run. Write clearly and informatively. Read and interpret written information. Perform each essential duty satisfactorily. Physical Demands: Regularly required to stand, use hands and fingers to handle and feel. Must also be able to talk and hear. Frequently required to walk and reach with arms and hands. Occasionally required to sit, climb, balance, stoop, kneel, crouch, crawl, and taste or smell. Regularly lift and/or move up to 25 lbs, frequently lift and/or move up to 60 lbs. Specific vision abilities required include close vision, distance vision, depth perception and ability to adjust focus.Work Environment: Regularly exposed to moving mechanical parts and fumes. Frequently exposed to airborne particles, wet and/or humid conditions, high precarious places and extreme heat. The noise level in the work environment is usually loud. Safety glasses and a bump cap required at all times in the plant work areas. Voted the ?Best Place to Work? many years! TEMP-TO-PERM! Once roll to Perm PAY INCREASES to $17 (1ST Shift) plus AMAZING BENEFITS! Including: FREE On-Site Clinic, Medical, Dental, Vision, Life and Accidental Death & Disability, 401K, Employee Recognition Events, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      FLAVORING OPERATOR (Agglomeration) Training to be able to tend to fluid beds during the flavoring process of food ingredient powders.Responsibilities:?Basic mechanical aptitude by using machine specific tools.?Ability to work safely when learning the equipment and surroundings?Properly lock out and tag out equipment.?Good Manufacturing Practices (GMPs) and how to keep the product safe?Assist coworkers in loading product and packaging final product; able to assist in packaging line with boxes, bags or totes.?Learn how to tear down equipment for cleaning?Learning how to assemble the equipment?Setting flow rates and starting equipment?Keeping up with equipment and product when running.Working hours: 6:00 AM - 2:25 PMSkills:Able to read and comprehend simple instructions, short correspondence and memos. Able to write simple correspondence. Able to effectively present information in one-on-one and small group situations to customers, clients and other employees of the organization.Able to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Able to compute rate, ratio and percent and to draw and interpret bar graphs.Able to apply common sense understanding, to carry out detailed but uninvolved written or oral instructions. Able to deal with problems involving a few concrete variables in standardized situations.Basic Computer Skills.Education:High SchoolExperience:0-1 yearsQualifications:Less than high school education; or up to one month related experience or training; or equivalent combination of education and experience.Able to: Collect and research data. Demonstrate attention to detail. Identify and resolves problems in a timely manner. Communicates changes and progress. Respond promptly to customer needs. Read and interpret written information. Maintain confidentiality. Communicate with line employees and supervisor as to status of the run. Write clearly and informatively. Read and interpret written information. Perform each essential duty satisfactorily. Physical Demands: Regularly required to stand, use hands and fingers to handle and feel. Must also be able to talk and hear. Frequently required to walk and reach with arms and hands. Occasionally required to sit, climb, balance, stoop, kneel, crouch, crawl, and taste or smell. Regularly lift and/or move up to 25 lbs, frequently lift and/or move up to 60 lbs. Specific vision abilities required include close vision, distance vision, depth perception and ability to adjust focus.Work Environment: Regularly exposed to moving mechanical parts and fumes. Frequently exposed to airborne particles, wet and/or humid conditions, high precarious places and extreme heat. The noise level in the work environment is usually loud. Safety glasses and a bump cap required at all times in the plant work areas. Voted the ?Best Place to Work? many years! TEMP-TO-PERM! Once roll to Perm PAY INCREASES to $17 (1ST Shift) plus AMAZING BENEFITS! Including: FREE On-Site Clinic, Medical, Dental, Vision, Life and Accidental Death & Disability, 401K, Employee Recognition Events, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Temp to Perm
      • $17.50 per hour
      • 6:00 PM - 6:30 AM
      The Warehouse Operator is responsible for receiving shipments, shipping orders, repalletization, inventory control, and Master Sanitation Cleaning. Must be knowledgeable and comply with all Quality Control (QC), Quality Assurance (QA), and good manufacturing practices (GMPs).Responsibilities:?Operate forklift as per operation guidelines to include safety procedures and guidelines?Inventory control in D365; read and understand lot numbers and scales; ensure all paperwork is complete (including time cards) in an accurate and timely manner; ensure documentation complies with SECS standards?Keep a neat, clean, and orderly work setting by completing the cleaning tasks as assigned; complete the Master Sanitation Schedule as necessary?Observe safety and security procedures, determine appropriate action beyond guidelines, and report potentially unsafe conditions?Monitor product quality to meet Company standards; report to Supervisor any deviation from scheduling or quality of service that may become a potential liability?Report to your Supervisor any failure to adhere to Balchem Corporation?s work ethics and standards?Perform other duties as assigned.?Adhere to all Company policies and procedures, i.e. personnel, safety, and equipment maintenance and upkeep?Become proficient in areas of production and safety policies and procedures (accident/injury reporting, blood borne pathogens, confined spaces, emergency evacuation, equipment operation/maintenance, hazard communication, ladders, lockout/tag out, personal protective equipment, etc.)Working hours: 6:00 PM - 6:30 AMSkills:--Computer literacy is required (prefer experience in warehouse inventory management systems, such as MRP/ERP)--Individual must be equipped with motivation, organization, time management, documentation, and communication skills (both orally and written)--Must have excellent attention to detail and have the ability to multi-task and prioritize--Individual should demonstrate work ethics (punctual, dependable, and trustworthy)--The ability to read and comprehend simple instructions, short correspondence, memos, and to write simple correspondence is also necessary--Individual must be able to pass any required examinations necessary to perform essential functions of the job--The ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization, as well as communicate and handle conflict in a professional manner is required--The ability to give and welcome feedback and contribute to building a positive team spirit is necessaryEducation:High SchoolExperience:0-1 yearsQualifications:WORKING CONDITIONS:?Individual will continually be required to stand, walk, use hands to finger, handle or feel, to talk and hear, and to utilize specific vision abilities including but not limited to close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus?Regularly required to climb, balance, stoop, kneel, crouch, and crawl, using proper ergonomic principles, taste, smell, and lift up to 25 pounds?Periodically required to lift up to and above 50 and 100 pounds, utilizing safe and proper lift techniques and equipment?Individual will rarely be required to sit?Individual will operate equipment, including but not limited to computers, drafting equipment and instruments involving scientific meters and measuring devices?The ability to distinguish colors is required?Anyone working in the plant or entering the plant must adhere to the personal protective equipment policies and procedures?All personal protective equipment furnished must be worn by all employees when required or needed to perform proper and safe working conditions?Individual may rarely be exposed to wet or humid conditions, working near moving mechanical parts, work in extreme heat (non-weather), work in high noise levels and vibration?Individual may also be periodically working in high or precarious places, fumes or airborne particles, toxic or caustic chemicals, outdoor weather conditions, and extreme cold (non-weather)Passing Drug Screen and Back Ground Pre-Employment screening CALL TO ACTION: Voted the Best Place to Work many years! TEMP-TO-PERMANENT POSITIONS! Once roll to Perm PAY IMMEDIATELY INCREASES by $1/HR plus AMAZING BENEFITS! Including: FREE On-Site Clinic, Medical, Dental, Vision, Life and Accidental Death & Disability, 401K, Employee Recognition Events, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The Warehouse Operator is responsible for receiving shipments, shipping orders, repalletization, inventory control, and Master Sanitation Cleaning. Must be knowledgeable and comply with all Quality Control (QC), Quality Assurance (QA), and good manufacturing practices (GMPs).Responsibilities:?Operate forklift as per operation guidelines to include safety procedures and guidelines?Inventory control in D365; read and understand lot numbers and scales; ensure all paperwork is complete (including time cards) in an accurate and timely manner; ensure documentation complies with SECS standards?Keep a neat, clean, and orderly work setting by completing the cleaning tasks as assigned; complete the Master Sanitation Schedule as necessary?Observe safety and security procedures, determine appropriate action beyond guidelines, and report potentially unsafe conditions?Monitor product quality to meet Company standards; report to Supervisor any deviation from scheduling or quality of service that may become a potential liability?Report to your Supervisor any failure to adhere to Balchem Corporation?s work ethics and standards?Perform other duties as assigned.?Adhere to all Company policies and procedures, i.e. personnel, safety, and equipment maintenance and upkeep?Become proficient in areas of production and safety policies and procedures (accident/injury reporting, blood borne pathogens, confined spaces, emergency evacuation, equipment operation/maintenance, hazard communication, ladders, lockout/tag out, personal protective equipment, etc.)Working hours: 6:00 PM - 6:30 AMSkills:--Computer literacy is required (prefer experience in warehouse inventory management systems, such as MRP/ERP)--Individual must be equipped with motivation, organization, time management, documentation, and communication skills (both orally and written)--Must have excellent attention to detail and have the ability to multi-task and prioritize--Individual should demonstrate work ethics (punctual, dependable, and trustworthy)--The ability to read and comprehend simple instructions, short correspondence, memos, and to write simple correspondence is also necessary--Individual must be able to pass any required examinations necessary to perform essential functions of the job--The ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization, as well as communicate and handle conflict in a professional manner is required--The ability to give and welcome feedback and contribute to building a positive team spirit is necessaryEducation:High SchoolExperience:0-1 yearsQualifications:WORKING CONDITIONS:?Individual will continually be required to stand, walk, use hands to finger, handle or feel, to talk and hear, and to utilize specific vision abilities including but not limited to close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus?Regularly required to climb, balance, stoop, kneel, crouch, and crawl, using proper ergonomic principles, taste, smell, and lift up to 25 pounds?Periodically required to lift up to and above 50 and 100 pounds, utilizing safe and proper lift techniques and equipment?Individual will rarely be required to sit?Individual will operate equipment, including but not limited to computers, drafting equipment and instruments involving scientific meters and measuring devices?The ability to distinguish colors is required?Anyone working in the plant or entering the plant must adhere to the personal protective equipment policies and procedures?All personal protective equipment furnished must be worn by all employees when required or needed to perform proper and safe working conditions?Individual may rarely be exposed to wet or humid conditions, working near moving mechanical parts, work in extreme heat (non-weather), work in high noise levels and vibration?Individual may also be periodically working in high or precarious places, fumes or airborne particles, toxic or caustic chemicals, outdoor weather conditions, and extreme cold (non-weather)Passing Drug Screen and Back Ground Pre-Employment screening CALL TO ACTION: Voted the Best Place to Work many years! TEMP-TO-PERMANENT POSITIONS! Once roll to Perm PAY IMMEDIATELY INCREASES by $1/HR plus AMAZING BENEFITS! Including: FREE On-Site Clinic, Medical, Dental, Vision, Life and Accidental Death & Disability, 401K, Employee Recognition Events, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Temp to Perm
      • $17.50 per hour
      • 6:00 PM - 6:30 AM
      Tends machine that performs packaging operation.Responsibilities:Assemble the dryer.Starts machine and observe to detect malfunctions.Stops machine and reports malfunction to supervisor.Records temperature and airflow settings and product status (moisture, density and size when needed) every half hour on appropriate paperwork.Collect all appropriate samples as needed.Packages product appropriately when needed.Insures that all packaging is labeled and recorded correctly.Able to correctly shut machine down and disassemble for cleaning.Working hours: 6:00 PM - 6:30 AMSkills:Able to read and comprehend simple instructions, short correspondence and memos. Able to write simple correspondence. Able to effectively present information in one-on-one and small group situations to customers, clients and other employees of the organization.Able to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Able to compute rate, ratio and percent and to draw and interpret bar graphs.Able to apply common sense understanding, to carry out detailed but uninvolved written or oral instructions. Able to deal with problems involving a few concrete variables in standardized situations.Basic Computer Skills.Collects and researches data. Attention to detail. Identifies and resolves problems timely. Communicates changes and progress. Able to read and interpret written information. Maintains confidentiality. Listens and gets clarification. Writes clearly and informatively. Able to read and interpret written information.Education:High SchoolExperience:0-1 yearsQualifications:Less than high school education; or up to one month related experience or training; or equivalent combination of education/experience. Regularly required to stand, use hands and fingers to handle and feel. Able to talk and hear. Frequently required to walk and reach with arms and hands. Occasionally required to sit, climb, balance, stoop, kneel, crouch, crawl, and taste or smell. Must regularly lift and/or move up to 10 lbs, frequently lift and/or move up to 25 lbs and occasionally lift and/or move up to 60 lbs. Vision abilities required include close vision, distance vision, depth perception and ability to adjust focus.Regularly exposed to moving mechanical parts and fumes or airborne particles. Frequently exposed to wet and/or humid conditions, high precarious places and extreme heat. The noise level in the work environment is usually loud. TEMP-TO PERM!! Once roll to Perm, PAY INCREASES TO $18.50/hr, plus AMAZING BENEFITS! Including: FREE On-Site Clinic, Medical, Dental, Vision, Life and Accidental Death & Disability, 401K, Employee Recognition Events, and more! Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Tends machine that performs packaging operation.Responsibilities:Assemble the dryer.Starts machine and observe to detect malfunctions.Stops machine and reports malfunction to supervisor.Records temperature and airflow settings and product status (moisture, density and size when needed) every half hour on appropriate paperwork.Collect all appropriate samples as needed.Packages product appropriately when needed.Insures that all packaging is labeled and recorded correctly.Able to correctly shut machine down and disassemble for cleaning.Working hours: 6:00 PM - 6:30 AMSkills:Able to read and comprehend simple instructions, short correspondence and memos. Able to write simple correspondence. Able to effectively present information in one-on-one and small group situations to customers, clients and other employees of the organization.Able to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Able to compute rate, ratio and percent and to draw and interpret bar graphs.Able to apply common sense understanding, to carry out detailed but uninvolved written or oral instructions. Able to deal with problems involving a few concrete variables in standardized situations.Basic Computer Skills.Collects and researches data. Attention to detail. Identifies and resolves problems timely. Communicates changes and progress. Able to read and interpret written information. Maintains confidentiality. Listens and gets clarification. Writes clearly and informatively. Able to read and interpret written information.Education:High SchoolExperience:0-1 yearsQualifications:Less than high school education; or up to one month related experience or training; or equivalent combination of education/experience. Regularly required to stand, use hands and fingers to handle and feel. Able to talk and hear. Frequently required to walk and reach with arms and hands. Occasionally required to sit, climb, balance, stoop, kneel, crouch, crawl, and taste or smell. Must regularly lift and/or move up to 10 lbs, frequently lift and/or move up to 25 lbs and occasionally lift and/or move up to 60 lbs. Vision abilities required include close vision, distance vision, depth perception and ability to adjust focus.Regularly exposed to moving mechanical parts and fumes or airborne particles. Frequently exposed to wet and/or humid conditions, high precarious places and extreme heat. The noise level in the work environment is usually loud. TEMP-TO PERM!! Once roll to Perm, PAY INCREASES TO $18.50/hr, plus AMAZING BENEFITS! Including: FREE On-Site Clinic, Medical, Dental, Vision, Life and Accidental Death & Disability, 401K, Employee Recognition Events, and more! Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Temp to Perm
      • $17.25 per hour
      • 2:00 PM - 10:30 PM
      FLAVORING OPERATOR (Agglomeration) Job Summary: Training to be able to tend to fluid beds during the flavoring process of food ingredient powders.Responsibilities:Basic mechanical aptitude by using machine specific tools.Ability to work safely when learning the equipment and surroundingsProperly lock out and tag out equipment.Good Manufacturing Practices (GMPs) and how to keep the product safeAssist coworkers in loading product and packaging final product; able to assist in packaging line with boxes, bags or totes.Learn how to tear down equipment for cleaningLearning how to assemble the equipmentSetting flow rates and starting equipmentKeeping up with equipment and product when running.Working hours: 2:00 PM - 10:30 PMSkills:Able to read and comprehend simple instructions, short correspondence and memos. Able to write simple correspondence. Able to effectively present information in one-on-one and small group situations to customers, clients and other employees of the organization.Able to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Able to compute rate, ratio and percent and to draw and interpret bar graphs.Able to apply common sense understanding, to carry out detailed but uninvolved written or oral instructions. Able to deal with problems involving a few concrete variables in standardized situations.Basic Computer Skills.Education:High SchoolExperience:0-1 yearsQualifications:Less than high school education; or up to one month related experience or training; or equivalent combination of education and experience.Able to: Collect and research data. Demonstrate attention to detail. Identify and resolves problems in a timely manner. Communicates changes and progress. Respond promptly to customer needs. Read and interpret written information. Maintain confidentiality. Communicate with line employees and supervisor as to status of the run. Write clearly and informatively. Read and interpret written information. Perform each essential duty satisfactorily. Physical Demands: Regularly required to stand, use hands and fingers to handle and feel. Must also be able to talk and hear. Frequently required to walk and reach with arms and hands. Occasionally required to sit, climb, balance, stoop, kneel, crouch, crawl, and taste or smell. Regularly lift and/or move up to 25 lbs, frequently lift and/or move up to 60 lbs. Specific vision abilities required include close vision, distance vision, depth perception and ability to adjust focus.Work Environment: Regularly exposed to moving mechanical parts and fumes. Frequently exposed to airborne particles, wet and/or humid conditions, high precarious places and extreme heat. The noise level in the work environment is usually loud. Safety glasses and a bump cap required at all times in the plant work areas. Voted the Best Place to Work many years! TEMP-TO-PERM! Once roll to Perm PAY INCREASES to $18.25, plus AMAZING BENEFITS! Including: FREE On-Site Clinic, Medical, Dental, Vision, Life and Accidental Death & Disability, 401K, Employee Recognition Events, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      FLAVORING OPERATOR (Agglomeration) Job Summary: Training to be able to tend to fluid beds during the flavoring process of food ingredient powders.Responsibilities:Basic mechanical aptitude by using machine specific tools.Ability to work safely when learning the equipment and surroundingsProperly lock out and tag out equipment.Good Manufacturing Practices (GMPs) and how to keep the product safeAssist coworkers in loading product and packaging final product; able to assist in packaging line with boxes, bags or totes.Learn how to tear down equipment for cleaningLearning how to assemble the equipmentSetting flow rates and starting equipmentKeeping up with equipment and product when running.Working hours: 2:00 PM - 10:30 PMSkills:Able to read and comprehend simple instructions, short correspondence and memos. Able to write simple correspondence. Able to effectively present information in one-on-one and small group situations to customers, clients and other employees of the organization.Able to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Able to compute rate, ratio and percent and to draw and interpret bar graphs.Able to apply common sense understanding, to carry out detailed but uninvolved written or oral instructions. Able to deal with problems involving a few concrete variables in standardized situations.Basic Computer Skills.Education:High SchoolExperience:0-1 yearsQualifications:Less than high school education; or up to one month related experience or training; or equivalent combination of education and experience.Able to: Collect and research data. Demonstrate attention to detail. Identify and resolves problems in a timely manner. Communicates changes and progress. Respond promptly to customer needs. Read and interpret written information. Maintain confidentiality. Communicate with line employees and supervisor as to status of the run. Write clearly and informatively. Read and interpret written information. Perform each essential duty satisfactorily. Physical Demands: Regularly required to stand, use hands and fingers to handle and feel. Must also be able to talk and hear. Frequently required to walk and reach with arms and hands. Occasionally required to sit, climb, balance, stoop, kneel, crouch, crawl, and taste or smell. Regularly lift and/or move up to 25 lbs, frequently lift and/or move up to 60 lbs. Specific vision abilities required include close vision, distance vision, depth perception and ability to adjust focus.Work Environment: Regularly exposed to moving mechanical parts and fumes. Frequently exposed to airborne particles, wet and/or humid conditions, high precarious places and extreme heat. The noise level in the work environment is usually loud. Safety glasses and a bump cap required at all times in the plant work areas. Voted the Best Place to Work many years! TEMP-TO-PERM! Once roll to Perm PAY INCREASES to $18.25, plus AMAZING BENEFITS! Including: FREE On-Site Clinic, Medical, Dental, Vision, Life and Accidental Death & Disability, 401K, Employee Recognition Events, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $15.00 - $16.00 per hour
      • 8:00 AM - 5:00 PM
      We have a wonderful opportunity for an adminsitrative professional who loves to assist customers! This position is long-term, temp-to-hire and offers full-time hours Monday-Friday.Position summary: As the Sales Operations Coordinator, you'll play a role in supporting the Sales Department by completing tasks that lead our organization towards operational effectiveness. The ideal candidate will be skilled in both technology duties as well as administrative duties. The Sales Operations Coordinator will report directly to the Sales Manager.Responsibilities:Learn ERP system P21 and procedures.Understand business model as it pertains to products and margins.Understanding concepts of pricing, delivery, cancellations, returns, and customer contracts.Set up new customers and maintain existing customer records in ERP system.Respond to Customer requests for standard quotations, stock checks, catalogues & samples.Enter sales orders & sample orders for products into ERP system and send customer confirmations.Create and update product specifications, work instructions and other documentation as required.Support action items from Sales Manager to ensure completion in a timely manner.Document customer communication including account highlights and issues.Report on department activities and goals.Working hours: 8:00 AM - 5:00 PMSkills:Attention to detail and accuracy.Good verbal and written communication skills.Strong team player works effectively and efficiently in a collaborative environment.Education:High SchoolExperience:1-4 yearsQualifications:Proficient in Office 365 & Microsoft Products, ERP knowledge helpful.2+ years of Experience in customer service or sales related role.College degree preferred but not required. APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We have a wonderful opportunity for an adminsitrative professional who loves to assist customers! This position is long-term, temp-to-hire and offers full-time hours Monday-Friday.Position summary: As the Sales Operations Coordinator, you'll play a role in supporting the Sales Department by completing tasks that lead our organization towards operational effectiveness. The ideal candidate will be skilled in both technology duties as well as administrative duties. The Sales Operations Coordinator will report directly to the Sales Manager.Responsibilities:Learn ERP system P21 and procedures.Understand business model as it pertains to products and margins.Understanding concepts of pricing, delivery, cancellations, returns, and customer contracts.Set up new customers and maintain existing customer records in ERP system.Respond to Customer requests for standard quotations, stock checks, catalogues & samples.Enter sales orders & sample orders for products into ERP system and send customer confirmations.Create and update product specifications, work instructions and other documentation as required.Support action items from Sales Manager to ensure completion in a timely manner.Document customer communication including account highlights and issues.Report on department activities and goals.Working hours: 8:00 AM - 5:00 PMSkills:Attention to detail and accuracy.Good verbal and written communication skills.Strong team player works effectively and efficiently in a collaborative environment.Education:High SchoolExperience:1-4 yearsQualifications:Proficient in Office 365 & Microsoft Products, ERP knowledge helpful.2+ years of Experience in customer service or sales related role.College degree preferred but not required. APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $14.00 per hour
      • 7:00 AM - 3:30 PM
      Spherion has partned with a fabulous electronics manufacturer; we are seeking out both skilled and entry-llevel assemblers to work on days! This person assembles wire harnesses, cable assemblies, printed circuit boards/mechanical assemblies with the use of various hand tools, adhering to the standards required. These are long-term, temp-to-hire positions.Responsibilities:Perform basic assembly tasks at a proficiency and quality standard rate set by the plant.Read and follow written build instructions (process sheets) to perform assignedoperation(s), including numbered lists, color coding and diagrams.Perform operations defined in product documentation to build printed circuit/mechanicalassemblies. This includes, but is not limited to, preparing parts, stuffing, inspection,testing, rework, soldering, packaging, masking and modifications.Position, insert and fasten a variety of mechanical and electrical parts.Use common hand tools, such as cutters, nut drivers, crimpers, soldering irons, etc.Use glues or adhesives to bond materials, when necessary.Select and route specific wires to a pre-determined point, tasks include cutting wire, andattaching terminal and/or connector.Remove specified amounts of outer cable/wire jacket to prepare material for nextoperation.Operate various types of equipment designed to complete specific tasks, such as crimpinga terminal onto the end of a wire or printing numbers on rubber material.Clean parts and/or assemblies using common solvents, as required.Support quality systems and takes corrective action of any issues that may adverselyaffect the customer.Initiate documentation corrections and works with engineering to ensure processes areaccurately defined.Follow procedures to ensure quality compliance.Understand and maintain Safety and Housekeeping Standards.Supports cooperative initiative for Continuous Improvement ?FOCUS? bypromoting the relentless pursuit of eliminating waste, participating in processimprovement, and showing the courage to take action and advocate change.Observes safety and security procedures, including maintaining confidentially, usingequipment / materials properly, reporting potentially unsafe conditions, and acting uponappropriate actions.Working hours: 7:00 AM - 3:30 PMSkills:DexterityHand Eye CoordinationEducation:High SchoolExperience:0-1 yearsQualifications:High School DiplomaThe ideal candidate will be open to a production position and have a records of satisfactory attendance Don't wait; apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion has partned with a fabulous electronics manufacturer; we are seeking out both skilled and entry-llevel assemblers to work on days! This person assembles wire harnesses, cable assemblies, printed circuit boards/mechanical assemblies with the use of various hand tools, adhering to the standards required. These are long-term, temp-to-hire positions.Responsibilities:Perform basic assembly tasks at a proficiency and quality standard rate set by the plant.Read and follow written build instructions (process sheets) to perform assignedoperation(s), including numbered lists, color coding and diagrams.Perform operations defined in product documentation to build printed circuit/mechanicalassemblies. This includes, but is not limited to, preparing parts, stuffing, inspection,testing, rework, soldering, packaging, masking and modifications.Position, insert and fasten a variety of mechanical and electrical parts.Use common hand tools, such as cutters, nut drivers, crimpers, soldering irons, etc.Use glues or adhesives to bond materials, when necessary.Select and route specific wires to a pre-determined point, tasks include cutting wire, andattaching terminal and/or connector.Remove specified amounts of outer cable/wire jacket to prepare material for nextoperation.Operate various types of equipment designed to complete specific tasks, such as crimpinga terminal onto the end of a wire or printing numbers on rubber material.Clean parts and/or assemblies using common solvents, as required.Support quality systems and takes corrective action of any issues that may adverselyaffect the customer.Initiate documentation corrections and works with engineering to ensure processes areaccurately defined.Follow procedures to ensure quality compliance.Understand and maintain Safety and Housekeeping Standards.Supports cooperative initiative for Continuous Improvement ?FOCUS? bypromoting the relentless pursuit of eliminating waste, participating in processimprovement, and showing the courage to take action and advocate change.Observes safety and security procedures, including maintaining confidentially, usingequipment / materials properly, reporting potentially unsafe conditions, and acting uponappropriate actions.Working hours: 7:00 AM - 3:30 PMSkills:DexterityHand Eye CoordinationEducation:High SchoolExperience:0-1 yearsQualifications:High School DiplomaThe ideal candidate will be open to a production position and have a records of satisfactory attendance Don't wait; apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $15.00 per hour
      • 3:30 PM - 2:00 AM
      Jobs! Jobs! Jobs! Did you know, Spherion has partned with a fabulous electronics manufacturer right here in Mankato; we are seeking out both skilled and entry-level assemblers to work on their afternoon shift. This person assembles wire harnesses, cable assemblies, printed circuit boards/mechanical assemblies with the use of various hand tools, adhering to the standards required. These are long-term, temp-to-hire positions.Responsibilities:Perform basic assembly tasks at a proficiency and quality standard rate set by the plant.Read and follow written build instructions (process sheets) to perform assignedoperation(s), including numbered lists, color coding and diagrams.Perform operations defined in product documentation to build printed circuit/mechanicalassemblies. This includes, but is not limited to, preparing parts, stuffing, inspection,testing, rework, soldering, packaging, masking and modifications.Position, insert and fasten a variety of mechanical and electrical parts.Use common hand tools, such as cutters, nut drivers, crimpers, soldering irons, etc.Use glues or adhesives to bond materials, when necessary.Select and route specific wires to a pre-determined point, tasks include cutting wire, andattaching terminal and/or connector.Remove specified amounts of outer cable/wire jacket to prepare material for nextoperation.Operate various types of equipment designed to complete specific tasks, such as crimpinga terminal onto the end of a wire or printing numbers on rubber material.Clean parts and/or assemblies using common solvents, as required.Support quality systems and takes corrective action of any issues that may adverselyaffect the customer.Initiate documentation corrections and works with engineering to ensure processes areaccurately defined.Follow procedures to ensure quality compliance.Understand and maintain Safety and Housekeeping Standards.Supports cooperative initiative for Continuous Improvement ?FOCUS? bypromoting the relentless pursuit of eliminating waste, participating in processimprovement, and showing the courage to take action and advocate change.Observes safety and security procedures, including maintaining confidentially, usingequipment / materials properly, reporting potentially unsafe conditions, and acting uponappropriate actions.Working hours: 3:30 PM - 2:00 AMSkills:DexterityHand Eye CoordinationEducation:High SchoolExperience:0-1 yearsQualifications:High School DiplomaThe ideal candidate will be open to a production position and have a records of satisfactory attendance Don't wait; apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Jobs! Jobs! Jobs! Did you know, Spherion has partned with a fabulous electronics manufacturer right here in Mankato; we are seeking out both skilled and entry-level assemblers to work on their afternoon shift. This person assembles wire harnesses, cable assemblies, printed circuit boards/mechanical assemblies with the use of various hand tools, adhering to the standards required. These are long-term, temp-to-hire positions.Responsibilities:Perform basic assembly tasks at a proficiency and quality standard rate set by the plant.Read and follow written build instructions (process sheets) to perform assignedoperation(s), including numbered lists, color coding and diagrams.Perform operations defined in product documentation to build printed circuit/mechanicalassemblies. This includes, but is not limited to, preparing parts, stuffing, inspection,testing, rework, soldering, packaging, masking and modifications.Position, insert and fasten a variety of mechanical and electrical parts.Use common hand tools, such as cutters, nut drivers, crimpers, soldering irons, etc.Use glues or adhesives to bond materials, when necessary.Select and route specific wires to a pre-determined point, tasks include cutting wire, andattaching terminal and/or connector.Remove specified amounts of outer cable/wire jacket to prepare material for nextoperation.Operate various types of equipment designed to complete specific tasks, such as crimpinga terminal onto the end of a wire or printing numbers on rubber material.Clean parts and/or assemblies using common solvents, as required.Support quality systems and takes corrective action of any issues that may adverselyaffect the customer.Initiate documentation corrections and works with engineering to ensure processes areaccurately defined.Follow procedures to ensure quality compliance.Understand and maintain Safety and Housekeeping Standards.Supports cooperative initiative for Continuous Improvement ?FOCUS? bypromoting the relentless pursuit of eliminating waste, participating in processimprovement, and showing the courage to take action and advocate change.Observes safety and security procedures, including maintaining confidentially, usingequipment / materials properly, reporting potentially unsafe conditions, and acting uponappropriate actions.Working hours: 3:30 PM - 2:00 AMSkills:DexterityHand Eye CoordinationEducation:High SchoolExperience:0-1 yearsQualifications:High School DiplomaThe ideal candidate will be open to a production position and have a records of satisfactory attendance Don't wait; apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temporary
      • $15.00 per hour
      • 8:00 AM - 4:30 PM
      Spherion is looking for seasonal data entry and clerical workers for our client here in Mankato! This position will work for the next 3-4 months depending on work-load; a great entry-level clerical opportunity!Responsibilities:- Processing incoming Energy assiatnce applications- Scanning documents in the their computer system- Processing incoming mail and client requests- Answering applicants questions and inquiries- General clerical functions- Taking inbound client phone callsWorking hours: 8:00 AM - 4:30 PMSkills:- Ability to work with people- Computer literacy- Strong communication skillsEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is looking for seasonal data entry and clerical workers for our client here in Mankato! This position will work for the next 3-4 months depending on work-load; a great entry-level clerical opportunity!Responsibilities:- Processing incoming Energy assiatnce applications- Scanning documents in the their computer system- Processing incoming mail and client requests- Answering applicants questions and inquiries- General clerical functions- Taking inbound client phone callsWorking hours: 8:00 AM - 4:30 PMSkills:- Ability to work with people- Computer literacy- Strong communication skillsEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $14.00 - $15.26 per hour
      • Various Shifts Available
      We have an opportunity available right here in North Mankato! Our office is seeking out day shift and overnight inventory associates for a manufacturing plant in uppper North. These positions offer full-time hours!1st shift: Mon-Friday 7:00AM-3:00PM - $14.502nd Shift: Sun-Thurs 9:00PM-7:00AM - $15.26SUMMARY:Receives, stores, and issues equipment, material, supplies, and compiles stock records in stockroom, or warehouse, or by performing the following duties.Responsibilities:Will include, but not limited to working in other areas within the inventory department.Completes daily cycle counting in accordance with established procedures.Counts, sorts, or weighs incoming articles to verify receipt of items on requisition or invoices.Stores articles in bins, on floor, or on shelves, according to identifying information such as style, size, or type of material.Updates computer system, prints work orders and assembles work order packets.Fills orders or issues supplies from stock, transports products to and from designated areas using hand truck or forklift.Prepares periodic, special, or perpetual inventory of stock, productions, returned goods and related transactions.Requisitions articles to fill incoming orders.Maintains inventory and other stock records.Working hours: Various Shifts AvailableSkills:Ability to work individually or in a teamEducation:High SchoolExperience:0-1 yearsQualifications:High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent APPLY today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We have an opportunity available right here in North Mankato! Our office is seeking out day shift and overnight inventory associates for a manufacturing plant in uppper North. These positions offer full-time hours!1st shift: Mon-Friday 7:00AM-3:00PM - $14.502nd Shift: Sun-Thurs 9:00PM-7:00AM - $15.26SUMMARY:Receives, stores, and issues equipment, material, supplies, and compiles stock records in stockroom, or warehouse, or by performing the following duties.Responsibilities:Will include, but not limited to working in other areas within the inventory department.Completes daily cycle counting in accordance with established procedures.Counts, sorts, or weighs incoming articles to verify receipt of items on requisition or invoices.Stores articles in bins, on floor, or on shelves, according to identifying information such as style, size, or type of material.Updates computer system, prints work orders and assembles work order packets.Fills orders or issues supplies from stock, transports products to and from designated areas using hand truck or forklift.Prepares periodic, special, or perpetual inventory of stock, productions, returned goods and related transactions.Requisitions articles to fill incoming orders.Maintains inventory and other stock records.Working hours: Various Shifts AvailableSkills:Ability to work individually or in a teamEducation:High SchoolExperience:0-1 yearsQualifications:High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent APPLY today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $14.50 per hour
      • 7:00 AM - 3:00 PM
      Our client in North Mankato needs assemblers, people who want to work FT hours, and learn new skills on the job! Entry level position in the Assembly Department for training and learning assembly processes. Assembles and tests sub-assemblies for finished products, valves, or hydraulic cylinders. Performs the following duties under the close supervision of a Manufacturing Supervisor.Responsibilities:Will include, but not limited to the following areas:Gathers blueprints, routing sheets, setting specifications, and all related fixtures and tools necessary to assembly the products when directed. Moves parts to assembly area from storage racks. Fastens parts together with bolts, screws, speed clips, or other fasteners. Uses blueprints, routing sheets, settings specifications, required hand tools and fixtures, and test benches to assist in assembly operation. Uses a variety of hand tools in a safe manner. Assembles parts into repair kits and switches; then packages and moves the products to the shipping department for further processing. Replaces all paper work from assigned job(s); cleans workstation and area for next job. Inspects products prior to packaging and returns rejected products to production departments.Observes packaging operations and inspects containers to verify conformance to specifications.Requisitions containers and other supplies of delivery to work stations.Establishes or adjusts work procedures to meet production schedules. Tallies number of products packaged or records information such as type of products packaged.Learns and maintains time and production records.Operates pallet jack to assist in loading or moving materials and products. Packs parts properly to prevent damage during transportation to next operation. Works overtime as requested/required by supervisor.Follows and monitors work instructions and ISO procedures.Looks for and recommends product and process improvements in support of corporate goals, objectives and activities.Working hours: 7:00 AM - 3:00 PMSkills:Ability to read and understand work instructions. Ability to read English and interpret documents such as safety rules, operating and maintenance instructions, Engineering prints and drawings as well as procedure manuals. Ability to communicate effectively with shipping clerks, other assembly and shop personnel.Education:High SchoolExperience:0-1 yearsQualifications:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or disabilities to perform the essential functions.High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. APPLY TODAYSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Our client in North Mankato needs assemblers, people who want to work FT hours, and learn new skills on the job! Entry level position in the Assembly Department for training and learning assembly processes. Assembles and tests sub-assemblies for finished products, valves, or hydraulic cylinders. Performs the following duties under the close supervision of a Manufacturing Supervisor.Responsibilities:Will include, but not limited to the following areas:Gathers blueprints, routing sheets, setting specifications, and all related fixtures and tools necessary to assembly the products when directed. Moves parts to assembly area from storage racks. Fastens parts together with bolts, screws, speed clips, or other fasteners. Uses blueprints, routing sheets, settings specifications, required hand tools and fixtures, and test benches to assist in assembly operation. Uses a variety of hand tools in a safe manner. Assembles parts into repair kits and switches; then packages and moves the products to the shipping department for further processing. Replaces all paper work from assigned job(s); cleans workstation and area for next job. Inspects products prior to packaging and returns rejected products to production departments.Observes packaging operations and inspects containers to verify conformance to specifications.Requisitions containers and other supplies of delivery to work stations.Establishes or adjusts work procedures to meet production schedules. Tallies number of products packaged or records information such as type of products packaged.Learns and maintains time and production records.Operates pallet jack to assist in loading or moving materials and products. Packs parts properly to prevent damage during transportation to next operation. Works overtime as requested/required by supervisor.Follows and monitors work instructions and ISO procedures.Looks for and recommends product and process improvements in support of corporate goals, objectives and activities.Working hours: 7:00 AM - 3:00 PMSkills:Ability to read and understand work instructions. Ability to read English and interpret documents such as safety rules, operating and maintenance instructions, Engineering prints and drawings as well as procedure manuals. Ability to communicate effectively with shipping clerks, other assembly and shop personnel.Education:High SchoolExperience:0-1 yearsQualifications:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or disabilities to perform the essential functions.High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. APPLY TODAYSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Le Sueur, Minnesota
      • Temp to Perm
      • $17.00 - $18.50 per hour
      • Various Shifts Available
      Spherion with another great manufacturing opportunity for you, this one is for a few skilled production operators. This client is willing to train those with no CNC or machining experience, which is great! In this role you will be: assisting with setup, responsible for quality of work and to appropriately resolve unusual operating conditions.SHIFTS AVAILABLE;1st shift 7:00 am - 3:20 pm Mon-Fri - $17.002nd shift 3:00 pm - 11:20 pm Mon- Fri - $18.50Responsibilities:Proficiently operates molding, injection, machining, casting, CNC and other manufacturing machines.Rotates to operate on various machines and various processes to fabricate products ranging from simple to elaborate. Generally works at an assigned work station. Does Not ordinarily perform machine setups, but does assist. Maintains equipment and performs lesser repairs.Inspects for quality, defects, and deviations from specifications. Responsible for quality of work and to appropriately resolve unusual operating conditions. Work is generally concentrated on similar machines and processes and operations.May assemble, pack and/or package a wide variety of products or materials. May occasionally operate a forklift. All other duties as assigned.Working hours: Various Shifts AvailableSkills:Read and understand written work instructions in English, independent decision making, effective self- management, proven machine operations and/or mechanical aptitude.Education:No Degree RequiredExperience:0-1 yearsQualifications:Ability to read and understand English language work instructions, independent decision-making, and effective self-management.Manually lift and move product and materials up to 50 lbs.High School Diploma or GED Don't wait, apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion with another great manufacturing opportunity for you, this one is for a few skilled production operators. This client is willing to train those with no CNC or machining experience, which is great! In this role you will be: assisting with setup, responsible for quality of work and to appropriately resolve unusual operating conditions.SHIFTS AVAILABLE;1st shift 7:00 am - 3:20 pm Mon-Fri - $17.002nd shift 3:00 pm - 11:20 pm Mon- Fri - $18.50Responsibilities:Proficiently operates molding, injection, machining, casting, CNC and other manufacturing machines.Rotates to operate on various machines and various processes to fabricate products ranging from simple to elaborate. Generally works at an assigned work station. Does Not ordinarily perform machine setups, but does assist. Maintains equipment and performs lesser repairs.Inspects for quality, defects, and deviations from specifications. Responsible for quality of work and to appropriately resolve unusual operating conditions. Work is generally concentrated on similar machines and processes and operations.May assemble, pack and/or package a wide variety of products or materials. May occasionally operate a forklift. All other duties as assigned.Working hours: Various Shifts AvailableSkills:Read and understand written work instructions in English, independent decision making, effective self- management, proven machine operations and/or mechanical aptitude.Education:No Degree RequiredExperience:0-1 yearsQualifications:Ability to read and understand English language work instructions, independent decision-making, and effective self-management.Manually lift and move product and materials up to 50 lbs.High School Diploma or GED Don't wait, apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Le Sueur, Minnesota
      • Temp to Perm
      • $13.50 - $14.50 per hour
      • Various Shifts Available
      Spherion with another great entry-level opportunity for you, this one is entry-level. Learn to work in a growing manufacturing facility offering long-term positions with the opportunity to roll over to full-time. This client is willing to train those with no manufacturing experience, which is great!SHIFTS AVAILABLE;1st shift 7:00 am - 3:20 pm Mon-Fri - $13.502nd shift 3:00 pm - 11:20 pm Mon- Fri - $14.503rd shift 11:00 pm - 7:20 am Mon - Fri - $14.50Responsibilities:Operate one or more machines to fabricate products while monitoring for unsatisfactory parts quality or unusual operating conditions.Operate pallet jack, etc. to load and unload trucks or transport raw material, supplies and products.Set up and use a variety of powered or hand tools to finish edges, glue, remove flash, clear holes, assemble, trim and pack product or parts into shipping cartons.Stand and work at an assigned workstation (s). Processes and operations may be repetitive.Assist elsewhere whenever and wherever needed.Working hours: Various Shifts AvailableSkills:Read and understand written work instructions in English.Education:No Degree RequiredExperience:0-1 yearsQualifications:Ability to read and understand English language work instructions, independent decision-making, and effective self-management.Manually lift and move product and materials up to 50 lbs. Don't wait, apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion with another great entry-level opportunity for you, this one is entry-level. Learn to work in a growing manufacturing facility offering long-term positions with the opportunity to roll over to full-time. This client is willing to train those with no manufacturing experience, which is great!SHIFTS AVAILABLE;1st shift 7:00 am - 3:20 pm Mon-Fri - $13.502nd shift 3:00 pm - 11:20 pm Mon- Fri - $14.503rd shift 11:00 pm - 7:20 am Mon - Fri - $14.50Responsibilities:Operate one or more machines to fabricate products while monitoring for unsatisfactory parts quality or unusual operating conditions.Operate pallet jack, etc. to load and unload trucks or transport raw material, supplies and products.Set up and use a variety of powered or hand tools to finish edges, glue, remove flash, clear holes, assemble, trim and pack product or parts into shipping cartons.Stand and work at an assigned workstation (s). Processes and operations may be repetitive.Assist elsewhere whenever and wherever needed.Working hours: Various Shifts AvailableSkills:Read and understand written work instructions in English.Education:No Degree RequiredExperience:0-1 yearsQualifications:Ability to read and understand English language work instructions, independent decision-making, and effective self-management.Manually lift and move product and materials up to 50 lbs. Don't wait, apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Le Sueur, Minnesota
      • Temp to Perm
      • $16.00 - $17.25 per hour
      • Various Shifts Available
      We have a client in Le Sueur looking for production workers, on all of their shifts! This client is offering full-time, long-term positions with opporrtunity to convert to full-time and take on their fabulous benefitts! If you're honest, hardworking, treat others with respect, and want the opportunity to learn and grow, we want to talk to you.SHIFTS AVAILABLE;- 1st Shift (Mon - Thur 5:00am - 3:20 pm) $16.00- 2nd Shift (Mon - Thur 3:00 pm to 1:20 am) +1.25/hr- 3rd Shift (Mon - Thur 9:00 pm to 5:20 am) +1.25/hrResponsibilities:Operate one or more machines to fabricate products while monitoring for unsatisfactory parts quality or unusual operating conditions. Set up and use various tools to finish edges, glue, remove flash, clear holes, saw, sand, straighten, assemble, grind, trim and pack product into shipping cartons.Operate pallet jack, etc., to load and unload trucks or transport raw material, supplies, and products. May operate a forklift after formal training.Stand, bend, twist and work at an assigned workstation(s). Processes and operations may be repetitive.Perform mechanical and safety inspections as well as basic maintenance.Work is generally concentrated on similar machines and processes, and operations. Assist elsewhere whenever and wherever needed.All other duties as assigned.Working hours: Various Shifts AvailableSkills:Read and understand written work instructions in English.Education:No Degree RequiredExperience:0-1 yearsQualifications:Ability to read and understand English language work instructions, independent decision-making, and effective self-management.Manually lift and move product and materials up to 50 lbs. Don't wait, apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We have a client in Le Sueur looking for production workers, on all of their shifts! This client is offering full-time, long-term positions with opporrtunity to convert to full-time and take on their fabulous benefitts! If you're honest, hardworking, treat others with respect, and want the opportunity to learn and grow, we want to talk to you.SHIFTS AVAILABLE;- 1st Shift (Mon - Thur 5:00am - 3:20 pm) $16.00- 2nd Shift (Mon - Thur 3:00 pm to 1:20 am) +1.25/hr- 3rd Shift (Mon - Thur 9:00 pm to 5:20 am) +1.25/hrResponsibilities:Operate one or more machines to fabricate products while monitoring for unsatisfactory parts quality or unusual operating conditions. Set up and use various tools to finish edges, glue, remove flash, clear holes, saw, sand, straighten, assemble, grind, trim and pack product into shipping cartons.Operate pallet jack, etc., to load and unload trucks or transport raw material, supplies, and products. May operate a forklift after formal training.Stand, bend, twist and work at an assigned workstation(s). Processes and operations may be repetitive.Perform mechanical and safety inspections as well as basic maintenance.Work is generally concentrated on similar machines and processes, and operations. Assist elsewhere whenever and wherever needed.All other duties as assigned.Working hours: Various Shifts AvailableSkills:Read and understand written work instructions in English.Education:No Degree RequiredExperience:0-1 yearsQualifications:Ability to read and understand English language work instructions, independent decision-making, and effective self-management.Manually lift and move product and materials up to 50 lbs. Don't wait, apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Blue Earth, Minnesota
      • Temp to Perm
      • $16.75 per hour
      • 2:30 PM - 11:00 PM
      Calling all of your production folks in the Blue Earth area -- we have some long-term general laborer roles available on the overnight shift with a large food manufacturer. The General Laborer position has two main job components: 1) basic line tasks on our cereal/ingredient packaging lines, and 2) cleaning tasks. All GL's rotate assignments throughout each workday.Responsibilities:Palletize, shrink wrap, and record and certify quantities.Perform cleaning duties such as sweeping and sanitizing. Cleaning duties often require working at heights using a scissor-lift. During changeovers, GL?s may work entire shifts of cleaning duties. Perform varied line duties such as checking code dates, aligning bags on conveyors, refilling cardboard stock, moving product and materials with a pallet jack, filling and weighing bulk product containers, assembling boxes, etc. Other duties as assigned.Working hours: 2:30 PM - 11:00 PMSkills:Ability to communicate verbally and in written form.Education:High SchoolExperience:1-4 yearsQualifications:High school diploma or GED preferred, but not required.Must be able to tolerate the above-listed physical and environmental demands of this position with or without accommodations.Must have some work experience doing manual labor within the last 5 years.Previous manufacturing experience preferred. APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Calling all of your production folks in the Blue Earth area -- we have some long-term general laborer roles available on the overnight shift with a large food manufacturer. The General Laborer position has two main job components: 1) basic line tasks on our cereal/ingredient packaging lines, and 2) cleaning tasks. All GL's rotate assignments throughout each workday.Responsibilities:Palletize, shrink wrap, and record and certify quantities.Perform cleaning duties such as sweeping and sanitizing. Cleaning duties often require working at heights using a scissor-lift. During changeovers, GL?s may work entire shifts of cleaning duties. Perform varied line duties such as checking code dates, aligning bags on conveyors, refilling cardboard stock, moving product and materials with a pallet jack, filling and weighing bulk product containers, assembling boxes, etc. Other duties as assigned.Working hours: 2:30 PM - 11:00 PMSkills:Ability to communicate verbally and in written form.Education:High SchoolExperience:1-4 yearsQualifications:High school diploma or GED preferred, but not required.Must be able to tolerate the above-listed physical and environmental demands of this position with or without accommodations.Must have some work experience doing manual labor within the last 5 years.Previous manufacturing experience preferred. APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Blue Earth, Minnesota
      • Temp to Perm
      • $16.75 - $17.00 per hour
      • 2:30 PM - 11:00 PM
      Spherion has partnered with a manufacturing client in Blue Earth, MN to fill their mixing and labor positions on 2nd shift! These positions offer full-time hours and are temp to hire! The Production Laborer is responsible for performing duties to load and unload mixing machines with large sacks of food ingredients as is consistent with specifications.Responsibilities:Follow mixing instructions Verify ingredients and cut open bags of ingredientsLoad and unload ingredientsSet-up mixing machine, turn on timer, and operate dischargerEnsure products produced meet quality and food safety standardsCheck yields and investigate discrepanciesMaintain accurate production recordsAssist in cleaning equipmentNotify supervisor of unusual problems, delays, and/or safety issuesFollow SOPs, GMPs safety rules, sanitation rules, good housekeeping procedures, and company rules of conductWorking hours: 2:30 PM - 11:00 PMSkills:Ability to work independently.Education:No Degree RequiredExperience:1-4 yearsQualifications:This position requires frequent moving and constant exertion of heavy physical effort. Prior experience in a position requiring heavy lifting is desirable.Ability to work in a standing position, climb stairs, and lift or move 50 - 56 pounds with or without reasonable accommodation is required. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion has partnered with a manufacturing client in Blue Earth, MN to fill their mixing and labor positions on 2nd shift! These positions offer full-time hours and are temp to hire! The Production Laborer is responsible for performing duties to load and unload mixing machines with large sacks of food ingredients as is consistent with specifications.Responsibilities:Follow mixing instructions Verify ingredients and cut open bags of ingredientsLoad and unload ingredientsSet-up mixing machine, turn on timer, and operate dischargerEnsure products produced meet quality and food safety standardsCheck yields and investigate discrepanciesMaintain accurate production recordsAssist in cleaning equipmentNotify supervisor of unusual problems, delays, and/or safety issuesFollow SOPs, GMPs safety rules, sanitation rules, good housekeeping procedures, and company rules of conductWorking hours: 2:30 PM - 11:00 PMSkills:Ability to work independently.Education:No Degree RequiredExperience:1-4 yearsQualifications:This position requires frequent moving and constant exertion of heavy physical effort. Prior experience in a position requiring heavy lifting is desirable.Ability to work in a standing position, climb stairs, and lift or move 50 - 56 pounds with or without reasonable accommodation is required. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Blue Earth, Minnesota
      • Temp to Perm
      • $16.75 - $17.00 per hour
      • Various Shifts Available
      We are working with a manufacturing client in Blue Earth, MN -- looking for a forklift operator on their overnight shift. In order to be considered for these positions, candidates must have at least 6 months of forklift experience in the past 18 months. We are looking for skilled, safety minded individuals, like YOU!2nd Shift 2:30PM-11PM3rd Shift 10:50PM-7AMResponsibilities:This position will assist in the movement, identification and storage of goods and materials (finished and raw) in the warehouse. While performing this job, the employee will operate safely and will maintain the safety and high quality of our product for our customers.Working hours: Various Shifts AvailableSkills:Ability to follow instructions.Ability to work as a team member and independently.Familiar with basic computer operations.Ability and willingness to perform repetitive tasks.Ability to follow safety procedures.Education:High SchoolExperience:1-4 yearsQualifications:High school Diploma or GED6 months of forklift operating experience within the past 18 months APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We are working with a manufacturing client in Blue Earth, MN -- looking for a forklift operator on their overnight shift. In order to be considered for these positions, candidates must have at least 6 months of forklift experience in the past 18 months. We are looking for skilled, safety minded individuals, like YOU!2nd Shift 2:30PM-11PM3rd Shift 10:50PM-7AMResponsibilities:This position will assist in the movement, identification and storage of goods and materials (finished and raw) in the warehouse. While performing this job, the employee will operate safely and will maintain the safety and high quality of our product for our customers.Working hours: Various Shifts AvailableSkills:Ability to follow instructions.Ability to work as a team member and independently.Familiar with basic computer operations.Ability and willingness to perform repetitive tasks.Ability to follow safety procedures.Education:High SchoolExperience:1-4 yearsQualifications:High school Diploma or GED6 months of forklift operating experience within the past 18 months APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temporary
      • $16.75 per hour
      • 6:00 AM - 4:00 PM
      Looking for you early birdies who like to work 4 ten hour shifts and start the weekend early--I see you! Spherion has an immediate need for packagers on the AM Shift shift; our client, an essential food manufacturer is in need of temporary help! The role of the Production Worker is to perform necessary functions in order to efficiently, safely, and correctly prepare and process raw material to prepare it for cooking or cut & package finished product in preparation for shipment to customer.Responsibilities:Follow daily production schedule and achieve specified goals.Ensure product conforms to specifications.Prevent and minimize rework and/or inedible.May require working on taping machines, shrink wrap machines, pallet jacks, trash and recycling compactors.Perform standard operating procedures of production and inspection functions as directed.Successfully complete all necessary technical training and skills verification as directed. Successfully complete all necessary soft skills training as directed.Return from breaks in a timely manner; notify lead/supervisor before leaving the department.Accurately complete all necessary paperwork as directed.Attend all department and company scheduled meetings.Works scheduled shift as assigned. Maintain a safe, clean and organized work area.Immediately report all accidents and deficiencies to the lead/supervisor.Ensure safety devices are installed and working properly.Suggest improvements; continuously improve the quality of all support activities.Perform all required duties within OSHA and company safety standards. Follows set company and OSHA safety rules, regulations, and guidelines at all timeWorking hours: 6:00 AM - 4:00 PMSkills:Must be able to work in a fast-paced environment.Must be able to perform repetitive functions.Must adhere to all company policies and regulatory guidelines.Must be able to accept direction from Department Leads and supervisorsMust be able to communicate with co-workers and supervisor.Must be able to work in a team oriented environment.Must be able to perform duties with minimal supervision.Excellent attendance and dependabilityAttention to detailFast-paced environmentWork well with othersGreat communication skillsEducation:No Degree RequiredExperience:0-1 yearsQualifications:The physical demands described here are representative of those that must be met by an employee to be successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. DON'T WAIT! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Looking for you early birdies who like to work 4 ten hour shifts and start the weekend early--I see you! Spherion has an immediate need for packagers on the AM Shift shift; our client, an essential food manufacturer is in need of temporary help! The role of the Production Worker is to perform necessary functions in order to efficiently, safely, and correctly prepare and process raw material to prepare it for cooking or cut & package finished product in preparation for shipment to customer.Responsibilities:Follow daily production schedule and achieve specified goals.Ensure product conforms to specifications.Prevent and minimize rework and/or inedible.May require working on taping machines, shrink wrap machines, pallet jacks, trash and recycling compactors.Perform standard operating procedures of production and inspection functions as directed.Successfully complete all necessary technical training and skills verification as directed. Successfully complete all necessary soft skills training as directed.Return from breaks in a timely manner; notify lead/supervisor before leaving the department.Accurately complete all necessary paperwork as directed.Attend all department and company scheduled meetings.Works scheduled shift as assigned. Maintain a safe, clean and organized work area.Immediately report all accidents and deficiencies to the lead/supervisor.Ensure safety devices are installed and working properly.Suggest improvements; continuously improve the quality of all support activities.Perform all required duties within OSHA and company safety standards. Follows set company and OSHA safety rules, regulations, and guidelines at all timeWorking hours: 6:00 AM - 4:00 PMSkills:Must be able to work in a fast-paced environment.Must be able to perform repetitive functions.Must adhere to all company policies and regulatory guidelines.Must be able to accept direction from Department Leads and supervisorsMust be able to communicate with co-workers and supervisor.Must be able to work in a team oriented environment.Must be able to perform duties with minimal supervision.Excellent attendance and dependabilityAttention to detailFast-paced environmentWork well with othersGreat communication skillsEducation:No Degree RequiredExperience:0-1 yearsQualifications:The physical demands described here are representative of those that must be met by an employee to be successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. DON'T WAIT! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $18.50 per hour
      • 6:00 AM - 6:30 PM
      You're a forklift driver from waaaaaay back. Material handling is your thing, and your great at it! Then we want to speak with you about this long-term, temp-to-hire forklift position. Our office is looking for a forklift operator who is responsible for accurately and efficiently receiving, storing and distributing materials, tools, equipment and products within establishments by performing the following duties The DAY shift will be working 6:00AM-6:30PM. This shift will be working on a rotating basis and therefore will not be on the same days every week and will required you to work every other weekend.Responsibilities:Safety:Adhere to all safety policies and proceduresSafely operate fork truck to pick up, transport and stack palletsMaintain a safe, clean and organized warehouse workplacePerform safety checks as neededQuality:Demonstrate a thorough understanding of electronic inventory tracking system (InnaTrack)Understand and comprehend materials release logs and job pick sheetsDeliver correct product to production floorPerform quality checks as neededInventory/Warehouse:Execute and maintain effective warehouse layout and organizationMonitor inventory and recommend action for non-usable, slow moving and excess stockOperate pallet jack and electric pallet wrapperLabel finished goods with accuracyVerify accurate inventory counts of raw materials and finished goodsWorking hours: 6:00 AM - 6:30 PMSkills:Maintain a high level of personal responsibility and ownershipMaintain a strong commitment to teamwork and concern for othersReliable and able to work within a team in fast paced environmentTrain, assist and lead employees (new and current) for development in required operational skillsMust be able to effectively use the English language, in verbal and written formMust be able to effectively communicate and interpret work instructions and safety rules using EnglishAbility to read, analyze, and interpret common internal reports and supporting documentsThe employee must occasionally lift and/or move up to 50 pounds and repetitive use of arms, hands, back and legs to unload and load productEducation:High SchoolExperience:0-1 yearsQualifications:Education and/or Experience:High school diploma or general education degree (GED)6 months of Forklift Operating Experience required APPLY TODAY!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      You're a forklift driver from waaaaaay back. Material handling is your thing, and your great at it! Then we want to speak with you about this long-term, temp-to-hire forklift position. Our office is looking for a forklift operator who is responsible for accurately and efficiently receiving, storing and distributing materials, tools, equipment and products within establishments by performing the following duties The DAY shift will be working 6:00AM-6:30PM. This shift will be working on a rotating basis and therefore will not be on the same days every week and will required you to work every other weekend.Responsibilities:Safety:Adhere to all safety policies and proceduresSafely operate fork truck to pick up, transport and stack palletsMaintain a safe, clean and organized warehouse workplacePerform safety checks as neededQuality:Demonstrate a thorough understanding of electronic inventory tracking system (InnaTrack)Understand and comprehend materials release logs and job pick sheetsDeliver correct product to production floorPerform quality checks as neededInventory/Warehouse:Execute and maintain effective warehouse layout and organizationMonitor inventory and recommend action for non-usable, slow moving and excess stockOperate pallet jack and electric pallet wrapperLabel finished goods with accuracyVerify accurate inventory counts of raw materials and finished goodsWorking hours: 6:00 AM - 6:30 PMSkills:Maintain a high level of personal responsibility and ownershipMaintain a strong commitment to teamwork and concern for othersReliable and able to work within a team in fast paced environmentTrain, assist and lead employees (new and current) for development in required operational skillsMust be able to effectively use the English language, in verbal and written formMust be able to effectively communicate and interpret work instructions and safety rules using EnglishAbility to read, analyze, and interpret common internal reports and supporting documentsThe employee must occasionally lift and/or move up to 50 pounds and repetitive use of arms, hands, back and legs to unload and load productEducation:High SchoolExperience:0-1 yearsQualifications:Education and/or Experience:High school diploma or general education degree (GED)6 months of Forklift Operating Experience required APPLY TODAY!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $17.50 per hour
      • 6:00 PM - 6:00 AM
      Look at you, you little night owl. Are you seeking out an overnight position, perhaps popping and producing one of the most delicious snacks on this side of the Blue Earth River? Then maybe we should discuss these overnight packaging and production positions. The Production Associate is responsible for working safely and efficiently on the production line to process and package food that meets food safety and quality requirements. The NIGHT shift will be working 6:00PM-6:00AM. This shift will be working on a rotating basis and therefore will not be on the same days every week and will required you to work every other weekend.Responsibilities:Production:Maintain and demonstrate a thorough understanding of processing specifications for varying products and materials.Identify and setup correct raw materials, recipes and utensils associated with each product.Execute exact measurements per recipe to ensure gold standard is met. Operate multiple electric kettles, simultaneously and efficiently.Add ingredients to electric kettle.Remove popped corn form kettles and dispense into bins.Effectively maintain kettle uptime to ensure efficient production flow for entire production shift.Monitor kettle performance and report kettle deficiencies to floor leadershipAssist with materials delivery as needed.Configure packaging equipment and materials for proper line setup during product changeovers and startupsAssemble corrugate items into cases or displays, package bags and palletize finished product to match specification Operate pallet jackWorking hours: 6:00 PM - 6:00 AMSkills:Education and/or Experience:High school diploma or general education degree (GED)Three or more month's related experience or other food production experience or manufacturing experienceEducation:High SchoolExperience:0-1 yearsQualifications:Language Skills:Must be able to effectively use the English language, in verbal and written formMust be able to effectively communicate and interpret work instructions and safety rules using English Don't miss out on these jobs, APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Look at you, you little night owl. Are you seeking out an overnight position, perhaps popping and producing one of the most delicious snacks on this side of the Blue Earth River? Then maybe we should discuss these overnight packaging and production positions. The Production Associate is responsible for working safely and efficiently on the production line to process and package food that meets food safety and quality requirements. The NIGHT shift will be working 6:00PM-6:00AM. This shift will be working on a rotating basis and therefore will not be on the same days every week and will required you to work every other weekend.Responsibilities:Production:Maintain and demonstrate a thorough understanding of processing specifications for varying products and materials.Identify and setup correct raw materials, recipes and utensils associated with each product.Execute exact measurements per recipe to ensure gold standard is met. Operate multiple electric kettles, simultaneously and efficiently.Add ingredients to electric kettle.Remove popped corn form kettles and dispense into bins.Effectively maintain kettle uptime to ensure efficient production flow for entire production shift.Monitor kettle performance and report kettle deficiencies to floor leadershipAssist with materials delivery as needed.Configure packaging equipment and materials for proper line setup during product changeovers and startupsAssemble corrugate items into cases or displays, package bags and palletize finished product to match specification Operate pallet jackWorking hours: 6:00 PM - 6:00 AMSkills:Education and/or Experience:High school diploma or general education degree (GED)Three or more month's related experience or other food production experience or manufacturing experienceEducation:High SchoolExperience:0-1 yearsQualifications:Language Skills:Must be able to effectively use the English language, in verbal and written formMust be able to effectively communicate and interpret work instructions and safety rules using English Don't miss out on these jobs, APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $16.00 per hour
      • 6:00 AM - 6:00 PM
      WEEKEND WORKERS, WEEKEND WORKERS, we are looking for weekend workers! Our client is now offering a modified schedule; you can work SATURDAY & SUNDAY only, if you are seeking out PT work on weekends, this is awesome for you! In this role, you will pop popcorn and package finished product. The DAY shift will be working 6:00AM-6:00PM and the NIGHT SHIFT working 6PM-6AM!Responsibilities:Adhere to all safety policies and proceduresMaintain a clean and organized production area to promote a safe work environmentPre-inspect kettle popping/ packaging station to ensure all equipment is proper, intact and in safe working conditionNotify supervisor immediately if any unsafe or potentially hazardous conditions are discoveredProduction:Maintain and demonstrate a thorough understanding of processing specifications for varying products and materials.Identify and setup correct raw materials, recipes and utensils associated with each product.Execute exact measurements per recipe to ensure gold standard is met. Operate multiple electric kettles, simultaneously and efficiently.Add ingredients to electric kettle.Remove popped corn form kettles and dispense into bins.Effectively maintain kettle uptime to ensure efficient production flow for entire production shift.Monitor kettle performance and report kettle deficiencies to floor leadershipAssist with materials delivery as needed.Configure packaging equipment and materials for proper line setup during product changeovers and startupsAssemble corrugate items into cases or displays, package bags and palletize finished product to match specification Operate pallet jackWorking hours: 6:00 AM - 6:00 PMSkills:Must be able to effectively use the English language, in verbal and written formMust be able to effectively communicate and interpret work instructions and safety rules using EnglishEducation:High SchoolExperience:0-1 yearsQualifications:Education and/or Experience:High school diploma or general education degree (GED)Three or more month's related experience or other food production experience or manufacturing experience APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      WEEKEND WORKERS, WEEKEND WORKERS, we are looking for weekend workers! Our client is now offering a modified schedule; you can work SATURDAY & SUNDAY only, if you are seeking out PT work on weekends, this is awesome for you! In this role, you will pop popcorn and package finished product. The DAY shift will be working 6:00AM-6:00PM and the NIGHT SHIFT working 6PM-6AM!Responsibilities:Adhere to all safety policies and proceduresMaintain a clean and organized production area to promote a safe work environmentPre-inspect kettle popping/ packaging station to ensure all equipment is proper, intact and in safe working conditionNotify supervisor immediately if any unsafe or potentially hazardous conditions are discoveredProduction:Maintain and demonstrate a thorough understanding of processing specifications for varying products and materials.Identify and setup correct raw materials, recipes and utensils associated with each product.Execute exact measurements per recipe to ensure gold standard is met. Operate multiple electric kettles, simultaneously and efficiently.Add ingredients to electric kettle.Remove popped corn form kettles and dispense into bins.Effectively maintain kettle uptime to ensure efficient production flow for entire production shift.Monitor kettle performance and report kettle deficiencies to floor leadershipAssist with materials delivery as needed.Configure packaging equipment and materials for proper line setup during product changeovers and startupsAssemble corrugate items into cases or displays, package bags and palletize finished product to match specification Operate pallet jackWorking hours: 6:00 AM - 6:00 PMSkills:Must be able to effectively use the English language, in verbal and written formMust be able to effectively communicate and interpret work instructions and safety rules using EnglishEducation:High SchoolExperience:0-1 yearsQualifications:Education and/or Experience:High school diploma or general education degree (GED)Three or more month's related experience or other food production experience or manufacturing experience APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Temp to Perm
      • $14.00 per hour
      • 4:00 PM - 2:00 AM
      Hello, again, just Spherion here with another opportunity! We are seeking out part hangers for our client here in Mankato; these positions are offering full-time hours Monday - Thursday; HELLO 3 DAY WEEKENDS! Not only that, these roles are temp-to-hire -- so long-term opportunity. No manufacturing experience needed, just a willingness to learn!Responsibilities:Hangs (unhangs) parts on paint line carriers according to standard work or proceduresPerforms visual check on all parts to ensure quality standards are metHangs (unhangs) parts on paint line carriers according to standard work or proceduresPerforms visual check on all parts to ensure quality standards are metOperates electric or pneumatic hoist to set heavier painted parts on carts in advance of assemblyUses pallet jack or forklift to move parts to storage areasPerforms daily inspections of equipment within area of responsibility to insure all equipment is in safe working orderStrives to meet all established safety, quality, cost, and productivity standardsContinually seeks to improve production methods, equipment performance and overall quality of productAbility to learn a variety of different product linesWorking hours: 4:00 PM - 2:00 AMSkills:Team orientedOrganizedAbility to follow standard work and proceduresGood communication skills (verbal and written)Education:No Degree RequiredExperience:0-1 yearsQualifications:Manufacturing experience is not required! Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Hello, again, just Spherion here with another opportunity! We are seeking out part hangers for our client here in Mankato; these positions are offering full-time hours Monday - Thursday; HELLO 3 DAY WEEKENDS! Not only that, these roles are temp-to-hire -- so long-term opportunity. No manufacturing experience needed, just a willingness to learn!Responsibilities:Hangs (unhangs) parts on paint line carriers according to standard work or proceduresPerforms visual check on all parts to ensure quality standards are metHangs (unhangs) parts on paint line carriers according to standard work or proceduresPerforms visual check on all parts to ensure quality standards are metOperates electric or pneumatic hoist to set heavier painted parts on carts in advance of assemblyUses pallet jack or forklift to move parts to storage areasPerforms daily inspections of equipment within area of responsibility to insure all equipment is in safe working orderStrives to meet all established safety, quality, cost, and productivity standardsContinually seeks to improve production methods, equipment performance and overall quality of productAbility to learn a variety of different product linesWorking hours: 4:00 PM - 2:00 AMSkills:Team orientedOrganizedAbility to follow standard work and proceduresGood communication skills (verbal and written)Education:No Degree RequiredExperience:0-1 yearsQualifications:Manufacturing experience is not required! Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $16.00 per hour
      • 5:00 AM - 2:30 PM
      Payroll Clerk in a Food Production office settingResponsibilities:Profit/Loss Yields, WIP and FG processing. Proficient in 10 key calculator skills, keyboard skills, Excel Spreadsheet use and formulas.Working hours: 5:00 AM - 2:30 PMSkills:Good understanding of Accounting: Algebra, Profit/Loss Yields, WIP and FG processing. Proficient in 10 key calculator skills, keyboard skills, Excel Spreadsheet use and formulas. Must have good problem-solving skills.Education:AssociateExperience:1-4 yearsQualifications:Required Education: minimum 1 year Accounting Clerk or 2 years experience in a production accounting position.Regular Work Schedule: 6:00 a.m. to 2:30 p.m., however, must stay until the daily work is completed, overtime is expected when necessary DIRECT HIRE POSITION! The best BENEFITS package you'll find! Including FREE On-Site Clinic on day ONE! 15 year of continual growth. No lay-offs! BENEFITS: The Well@Work Clinic is FREE to ALL Employees from DAY ONE and equipped to handle complex to minor cases, including the following services: Diagnosis and Treatment for illnesses and conditions, Physical Exams, and Lab Tests. PLUS: Medical, Dental, Life, Supplemental Life, and Short-term Disability Insurance. Nine Paid Holidays, eligible immediately upon hire. Two weeks paid vacations after one year of service. 401K plan (after one year) of service with a company contributionSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Payroll Clerk in a Food Production office settingResponsibilities:Profit/Loss Yields, WIP and FG processing. Proficient in 10 key calculator skills, keyboard skills, Excel Spreadsheet use and formulas.Working hours: 5:00 AM - 2:30 PMSkills:Good understanding of Accounting: Algebra, Profit/Loss Yields, WIP and FG processing. Proficient in 10 key calculator skills, keyboard skills, Excel Spreadsheet use and formulas. Must have good problem-solving skills.Education:AssociateExperience:1-4 yearsQualifications:Required Education: minimum 1 year Accounting Clerk or 2 years experience in a production accounting position.Regular Work Schedule: 6:00 a.m. to 2:30 p.m., however, must stay until the daily work is completed, overtime is expected when necessary DIRECT HIRE POSITION! The best BENEFITS package you'll find! Including FREE On-Site Clinic on day ONE! 15 year of continual growth. No lay-offs! BENEFITS: The Well@Work Clinic is FREE to ALL Employees from DAY ONE and equipped to handle complex to minor cases, including the following services: Diagnosis and Treatment for illnesses and conditions, Physical Exams, and Lab Tests. PLUS: Medical, Dental, Life, Supplemental Life, and Short-term Disability Insurance. Nine Paid Holidays, eligible immediately upon hire. Two weeks paid vacations after one year of service. 401K plan (after one year) of service with a company contributionSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $15.75 per hour
      • 7:00 AM - 3:00 PM
      For assigned shift, works as a team in following work schedules to produce on time, quality parts. Performs various jobfunctions, such as hanging parts in preparation for coating, removing parts after coating, material movement, and packaging.Responsibilities:Work as a team in hanging individual parts on various sized fixtures for placement on line by following order priority list andshop order.Per shop order, remove parts from fixtures after coating and place in required containers. Pack parts into boxes, completeassociated paperwork, and load data into computer system. Remove and replace fixtures as required.Maintains quality and ISO standards by checking/testing product, charting results and performs a general inspection ofcoated parts and parts to be coated.Maintains accuracy and resolves discrepancies in shop orders by verifying quantity and part identification with shop order.Sort parts as needed.Determine whether a failure is due to a process malfunction or inferior quality of parts.Able to rotate between various jobs and equipment as instructed, performing material movement, setups, operation ofequipment and minor preventative maintenance functions.Positions or move containers in various work areas as required.Maintains work area in a neat and clean manner to facilitate production and minimize safety hazards.Works safely and follows procedures/methods as required to prevent injuries and accidents.Performs preventative maintenance functions of greasing, oiling, cleaning, etc. To maintain equipment as required orrequested.Achievement of certified operator classification is required.Performs other duties as assigned or requested.Working hours: 7:00 AM - 3:00 PMSkills:Skills/Abilities - Good dexterity and eye-hand coordination are necessary. Able to work quickly and accurately. Ability toread shop orders and work instructions/procedures. The ability to be flexible and work cooperatively as a team player isrequired. Good interaction and communication skills are necessaryEducation:No Degree RequiredExperience:1-4 yearsQualifications:Learning Period - One year is required to perform all aspects of the job.Supervision Received - Position is under regular supervision. Only exceptional tasks are checked. Employee receivesspecific instructions and selects from established methods and procedures to complete tasks.Problem Solving and Decision Making - Determine if parts meet quality and ISO standards or whether parts should berejected. Errors in judgment may not be detected until they have caused noticeable costs in time, money and lost production.Relations with Others - Working as a team is necessary as well as maintaining good interpersonal skills and communicationability. Employee has daily contact with area team members, shift leaders, supervisors, and personnel from othermanufacturing and support teams. The incumbent may participate in small group activities, such as task teams, safetymeetings and other improvement efforts. APPLY NOW ! IMMEDIATE OPENINGS !Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      For assigned shift, works as a team in following work schedules to produce on time, quality parts. Performs various jobfunctions, such as hanging parts in preparation for coating, removing parts after coating, material movement, and packaging.Responsibilities:Work as a team in hanging individual parts on various sized fixtures for placement on line by following order priority list andshop order.Per shop order, remove parts from fixtures after coating and place in required containers. Pack parts into boxes, completeassociated paperwork, and load data into computer system. Remove and replace fixtures as required.Maintains quality and ISO standards by checking/testing product, charting results and performs a general inspection ofcoated parts and parts to be coated.Maintains accuracy and resolves discrepancies in shop orders by verifying quantity and part identification with shop order.Sort parts as needed.Determine whether a failure is due to a process malfunction or inferior quality of parts.Able to rotate between various jobs and equipment as instructed, performing material movement, setups, operation ofequipment and minor preventative maintenance functions.Positions or move containers in various work areas as required.Maintains work area in a neat and clean manner to facilitate production and minimize safety hazards.Works safely and follows procedures/methods as required to prevent injuries and accidents.Performs preventative maintenance functions of greasing, oiling, cleaning, etc. To maintain equipment as required orrequested.Achievement of certified operator classification is required.Performs other duties as assigned or requested.Working hours: 7:00 AM - 3:00 PMSkills:Skills/Abilities - Good dexterity and eye-hand coordination are necessary. Able to work quickly and accurately. Ability toread shop orders and work instructions/procedures. The ability to be flexible and work cooperatively as a team player isrequired. Good interaction and communication skills are necessaryEducation:No Degree RequiredExperience:1-4 yearsQualifications:Learning Period - One year is required to perform all aspects of the job.Supervision Received - Position is under regular supervision. Only exceptional tasks are checked. Employee receivesspecific instructions and selects from established methods and procedures to complete tasks.Problem Solving and Decision Making - Determine if parts meet quality and ISO standards or whether parts should berejected. Errors in judgment may not be detected until they have caused noticeable costs in time, money and lost production.Relations with Others - Working as a team is necessary as well as maintaining good interpersonal skills and communicationability. Employee has daily contact with area team members, shift leaders, supervisors, and personnel from othermanufacturing and support teams. The incumbent may participate in small group activities, such as task teams, safetymeetings and other improvement efforts. APPLY NOW ! IMMEDIATE OPENINGS !Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temp to Perm
      • $20.95 per hour
      • 6:00 PM - 6:00 AM
      Work for an outstanding, reputable company in Owatonna, MN as a Machine Operator/Maintenance Mechanic. Start a new career today! ***Work 6:00 PM - 6:00 AM (rotating 4 days on, 4 days off) - Work 6 months out of the year!***Direct Hire OpportunityTotal Compensation Package upon full time employment with the company:-Competitive salaries with bi-annual plant gainsharing plan-Paid vacation and holidays-Comprehensive healthcare where company pays 100% of the cost for employee coverage.-401K with company match, active Pension Plan and Stock Purchase Plan-Company paid life insurance and short-term disability with optional long-term disabilityPurpose:The Machine Operator is responsible for the set up, operation and maintenance of the cupping press, body makers, trimmers, and conveying systems.Responsibilities:-The Industrial Mechanic/Machine Operator will inspect, upend and load coils onto the unwinder and feed coils through lubricator and into press.-Set-up, maintenance and machine operation of the upender, unwinder, lubricator, and cupping press.-Set-up maintenance and machine operation of the body makers, trimmers, and conveying systems.-Inspect and monitor, then enter into computer the following can specifications:-flange wall thickness - mid-wall thickness - dome depth - trim can height-The machine operator will perform visual checks and cup weights to insure that process is in compliance and take appropriate measures.-Assist in other areas as needed to maintain smooth can flow through the plant.-Complete required paperwork and documentation such as coil log, check sheets, etc.-Maintain cleanliness of all work areas and machines and practice proper safety procedures.-Performs other job-related duties as required or assigned.Working hours: 6:00 PM - 6:00 AMSkills:-Mechanical AptitudeEducation:No Degree RequiredExperience:1-4 yearsQualifications:-Knowledge in pneumatics, hydraulics-Knowledge using micrometers, calipers-Mechanical knowledge-Previous experience in machine operating Start your career today! Apply now! Urgently hiring.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Work for an outstanding, reputable company in Owatonna, MN as a Machine Operator/Maintenance Mechanic. Start a new career today! ***Work 6:00 PM - 6:00 AM (rotating 4 days on, 4 days off) - Work 6 months out of the year!***Direct Hire OpportunityTotal Compensation Package upon full time employment with the company:-Competitive salaries with bi-annual plant gainsharing plan-Paid vacation and holidays-Comprehensive healthcare where company pays 100% of the cost for employee coverage.-401K with company match, active Pension Plan and Stock Purchase Plan-Company paid life insurance and short-term disability with optional long-term disabilityPurpose:The Machine Operator is responsible for the set up, operation and maintenance of the cupping press, body makers, trimmers, and conveying systems.Responsibilities:-The Industrial Mechanic/Machine Operator will inspect, upend and load coils onto the unwinder and feed coils through lubricator and into press.-Set-up, maintenance and machine operation of the upender, unwinder, lubricator, and cupping press.-Set-up maintenance and machine operation of the body makers, trimmers, and conveying systems.-Inspect and monitor, then enter into computer the following can specifications:-flange wall thickness - mid-wall thickness - dome depth - trim can height-The machine operator will perform visual checks and cup weights to insure that process is in compliance and take appropriate measures.-Assist in other areas as needed to maintain smooth can flow through the plant.-Complete required paperwork and documentation such as coil log, check sheets, etc.-Maintain cleanliness of all work areas and machines and practice proper safety procedures.-Performs other job-related duties as required or assigned.Working hours: 6:00 PM - 6:00 AMSkills:-Mechanical AptitudeEducation:No Degree RequiredExperience:1-4 yearsQualifications:-Knowledge in pneumatics, hydraulics-Knowledge using micrometers, calipers-Mechanical knowledge-Previous experience in machine operating Start your career today! Apply now! Urgently hiring.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Temp to Perm
      • $19.26 per hour
      • 6:00 PM - 6:00 AM (Various Shifts Available)
      Work for an outstanding, reputable company in Owatonna, MN as a Production Forklift Operator. Start a new career today! ***Work 6:00 PM - 6:00 AM (rotating 4 days on, 4 days off)***Direct Hire Opportunity! Weekly Pay!Total Compensation Package:-Competitive wages with bi-annual plant gainsharing plan-Paid vacations and holidays-Comprehensive healthcare where company pays 100% of employee coverage-401K with company match, active Pension Plan and Stock Purchase Plan-Company paid life insurance and short term disability Purpose:The Production Forklift Operator with ensure that quality packaging materials are supplied to palletizing operations and transport pallets of finished cans to appropriate area of the warehouse.Responsibilities:-The Forklift Operator will keep palletizer properly supplied with pallets, top frames, and slip sheets and ensure the quality of all materials.-Keep pallets aligned properly and remove jams as needed in production-Make sure pallet inventory is properly sorted, with defective pallets stored in separate area.-Check conditions of forklift and perform basic P.M.'s at start of each shift.-Ensure strappers are full of banding material and pallets are flowing smoothly through lower conveying. -Perform band tension check once per shift and document results on check sheet.-Inspect and transport finished pallets to warehouse, referring any H.F.I.s for proper disposition.-The Forklift Operator will maintain good housekeeping in lower conveying area.-Assist in other areas as needed to maintain a smooth flow of cans through the plant.Working hours: 6:00 PM - 6:00 AM (Various Shifts Available)Skills:-Previous experience operating a forklift preferredEducation:No Degree RequiredExperience:1-4 yearsQualifications:-Ability to safely operate all forklifts in plant.-High stacking, double tine experience preferred-Know how to fill tanks and do basic inspections of fork truck at shift start up.-Able to read and understand pallet tickets and date codes and production schedules.-Knowledge of safety regulations which apply to work functions. Work for a great local company in Owatonna, MN as a Forklift Operator. Complete benefit package upon full time employment with the company. Apply today! ***Urgently hiring!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Work for an outstanding, reputable company in Owatonna, MN as a Production Forklift Operator. Start a new career today! ***Work 6:00 PM - 6:00 AM (rotating 4 days on, 4 days off)***Direct Hire Opportunity! Weekly Pay!Total Compensation Package:-Competitive wages with bi-annual plant gainsharing plan-Paid vacations and holidays-Comprehensive healthcare where company pays 100% of employee coverage-401K with company match, active Pension Plan and Stock Purchase Plan-Company paid life insurance and short term disability Purpose:The Production Forklift Operator with ensure that quality packaging materials are supplied to palletizing operations and transport pallets of finished cans to appropriate area of the warehouse.Responsibilities:-The Forklift Operator will keep palletizer properly supplied with pallets, top frames, and slip sheets and ensure the quality of all materials.-Keep pallets aligned properly and remove jams as needed in production-Make sure pallet inventory is properly sorted, with defective pallets stored in separate area.-Check conditions of forklift and perform basic P.M.'s at start of each shift.-Ensure strappers are full of banding material and pallets are flowing smoothly through lower conveying. -Perform band tension check once per shift and document results on check sheet.-Inspect and transport finished pallets to warehouse, referring any H.F.I.s for proper disposition.-The Forklift Operator will maintain good housekeeping in lower conveying area.-Assist in other areas as needed to maintain a smooth flow of cans through the plant.Working hours: 6:00 PM - 6:00 AM (Various Shifts Available)Skills:-Previous experience operating a forklift preferredEducation:No Degree RequiredExperience:1-4 yearsQualifications:-Ability to safely operate all forklifts in plant.-High stacking, double tine experience preferred-Know how to fill tanks and do basic inspections of fork truck at shift start up.-Able to read and understand pallet tickets and date codes and production schedules.-Knowledge of safety regulations which apply to work functions. Work for a great local company in Owatonna, MN as a Forklift Operator. Complete benefit package upon full time employment with the company. Apply today! ***Urgently hiring!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
    60 of 185 jobs seen

    Thank you for subscribing to your personalized job alerts.

    It looks like you want to switch your language. This will reset your filters on your current job search.