19 Travel Manufacturing & Production jobs found

Works with engineers and production to develop new methods and procedures on assembling and field installation of new high-level equipment designs. Works with production personnel to optimize existing methods and procedures. Accomplishes various production assembly functions that are complicated or intricate. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Operates hand or power tools, or production equipment. Must have thorough understanding of part prints (tolerances, symbols, etc.), perform checks for quality of parts and adjust as required. Good communication skills, written and/or verbal, when corresponding with customers on field installations and service requirements.Travel is required with this position and can be extensive at times. Which requires flexibility to working hours and days. Weekends may be required at times, however minimal.Responsibilities:?Performs work as outlined on install or warranty work with efficiency and accuracy, in accordance with company standards. ?Diagnoses cause of any malfunction and performs repair. ?Communicates with production department to obtain needed parts. ?Saves and tags parts of the job if under warranty or if requested by the customer. ?Examines equipment to determine if further safety or service work is required or recommended. ?Communicates with customer immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. ?Documents all work performed and recommended on the repair. ?Cycle equipment to verify customers concern and after repairs to verify repairs corrected customers concerns. ?Report machinery defects or malfunctions to supervisor and/or customer. ?Keeps shop area neat and clean. ?Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. ?Operates all tools and equipment in a safe manner. ?Reports any safety issues immediately to management.Working hours: 7:00 AM - 3:15 PMSkills:--Degree, diploma, or certificate in Industrial Maintenance or five years of installation/maintenance experience. --Must have experience with electrical wiring and reading schematics for electrical, hydraulics, and pneumatics. Knowledge of programming is a plus. --Must have mechanical and equipment assembly aptitude. Welding and or machining experience is a plus.--Must have good communication skills, problem solving skills and be well organized. --Must be able to work a flexible schedule as this position includes travel to customers' facilities.Education:High SchoolExperience:1-4 yearsQualifications:?Must be able to travel up to 30% of the time. ?Individuals will work near moving mechanical parts of machinery and electrically activated devices. ?Perform math skills of addition, subtraction, multiplication, and division.?Knowledge of decimals, fractions, and metric/English conversions.?Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.?Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture. ?Using a specified training format, work closely in training new installation/service technicians.?Requires a pre-employment screening which includes, however not limited to, a drug screen and driving report. DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP,

Are you looking for your next great career opportunity? Like working in manufacturing, and want an opportunity where you can work with a great team to grow, develop, and advance? Spherion is partnering with a manufacturing client in the northeast Columbia area in search of a Quality Inspector. This is a fantastic opportunity to get your foot in the door with a great company, receive excellent training, and learn a variety of different job functions. This is a TEMP TO HIRE opportunity that offers competitive pay, stable schedule, great work-life balance, and the opportunity for advancement!Responsibilities:Assist in quality activities in the production area, component and/or finished goods warehouses as needed. Tests and inspects products at various stages of the production process.Conduct audits and product/process validation. Uses gauges and other devices to confirm conformity to product standards.Support other quality department employees in their activities.Support activities in regards to industry certification programs.Support company and departmental needs as directed by manager or executive management.Perform internal quality system audits as directed by manager.Other responsibilities as assigned.Working hours: Various Shifts AvailableSkills:Must be able to sit, stoop or stand for long periods of time.Must be able to lift and 25 pounds.Must be able to read, write, and communicate in English.Demonstrated capability with Microsoft Office suite of tools required. 10% travel requiredEducation:No Degree RequiredExperience:4-7 yearsQualifications:At least five years of automotive industry manufacturing experience desired. Apply today for immediate consideration!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Spherion is recruiting for the position of Assembly Technician. This is a Direct hire order and what I would consider a career move. Client is seeking 3 Technicians, business is booming and jobs are coming in. They have work world wide, so the stability is there. Additional duties will be to assemble equipment when skid and parts are ready, troubleshoot and test machinery, identify malfunctions and resolve issues. Overtime is almost a given at some point during the various projects. my client is seeking someone who is wanting to find a home and grow... If you have experience building equipment according to P&E drawings, we need to talk!!!Responsibilities:*Build equipment correctly according to P&E drawings, ensuring equipment meets customer requirements and expectations*Troubleshoot and test machinery and equipment*Assemble equipment when skid and parts are ready*Complete adjustments during the fabrication process based on punch lists*Travel to customer locations to troubleshoot and repair rental equipment and customer owned equipment*Communicate material needs to the Shop Manager*Communicate with Shipping and Receiving lead regarding partsWorking hours: 8:00 AM - 5:00 PMSkills:*Build equipment correctly according to P&E drawings, ensuring equipment meets customer requirements and expectations*Troubleshoot and test machinery and equipment*Assemble equipment when skid and parts are ready*Complete adjustments during the fabrication process based on punch lists*Travel to customer locations to troubleshoot and repair rental equipment and customer owned equipment*Communicate material needs to the Shop Manager*Communicate with Shipping and Receiving lead regarding partsEducation:AssociateExperience:1-4 yearsQualifications:*At least 3 years of experience performing he above duties*Fiberglass Reinforce Piping experience is a HUGE advantage www.spherion.com and apply for the Assembly Technician positionSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Spherion is seeking an experienced Hydraulic Heavy Equipment Mechanic.Responsibilities:Inspects equipment for damagesOperationally tests equipment and/or componentsRigs, lifts, and/or moves equipment and/or components.Disassembles and assembles equipment.Diagnoses and corrects malfunctions in the shop.Working hours: 8:00 AM - 5:00 PMSkills:Travel up to 50%, including internationally2-5 years of directly related training and/or experience.Must be physically and mentally able to operate heavy machinery, automobiles and light trucks, cranes, lifting equipment, computers and diagnostic equipment.Covid-19 vaccination requiredEducation:TradeExperience:4-7 yearsQualifications:HS Diploma or EquivalentProven experience in related position Apply now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Looking for a career focused opportunity with great job stability and a chance for growth. We are looking for welders with beginner to intermediate skill level for a large manufacturing company in the Bryan-College Station area. PREFERRED: experience in construction, manufacturing or fabricating fields.Responsibilities:Utilize the GMAW /MIG, GTAW/TIG processes of aluminum, carbon steel, and stainless steelTroubleshoot and repair problems with machinery to ensure everything is in working orderMaintain a clean and organized work spaceKeep up with accurate inventoryEnsures cost-effective usage of all equipment, supplies and toolsMaintain all company policies, standards and SOPsWorking hours: Various Shifts AvailableSkills:Able to lift and carry 25 pounds unassisted regularlyAble to read blueprints and plan aheadWillingness to travelAble to operate a forkliftWilling to operate a grinder, metabo and stationary saws, and basic hand toolsEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma Or GED equivalentExperience in construction, manufacturing and fabrication preferred Apply nowSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Spherion Staffing is hiring for a Field Service Engineer for a large manufacturing company in Conroe, TX.Responsibilities:Inspects equipment for damages.Operationally tests equipment and/or components.Cleans equipment.Looks up and orders parts.Rigs, lifts, and/or moves equipment and/or components.Disassembles and assembles equipment and/or components.Diagnoses and corrects malfunctions in the shop or field.Maintains the work area and yard in a clean and orderly manner.Requires some travelDemonstrates professional conduct at all times.Performs a variety of other Service support duties as assigned.Working hours: 8:00 AM - 5:00 PMSkills:Highly organizedStrong work ethic and dependableResponsible and punctualEducation:High SchoolExperience:4-7 yearsQualifications:HS Diploma or Equivalent2-4 years of experience Apply now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Leads global project teams for effective development and commercialization of new consumer packaging products. Displays clear understanding of team goals as defined by Global Marketing requirements, to deliver new innovative value-added consumer dispensing solutions. Motivates and supervises members of assigned project teams. Demonstrates the ability to lead a multi-disciplined work groups to effectively develop, tool and commercialize new products, meeting all objectives and schedules. Exhibits ability to communicate clearly, using both verbal and written skills. Displays clear leadership skills in working with customers, suppliers and operations teams to ensure successful execution of assigned projects. Drives new product development leading to commercialization of new international consumer product dispensing solutions.Responsibilities:Lead assigned team to identify goals, set plans, and successfully execute project activities on time, on budget using a StageGate methodology. Ensure that projects result in products meeting Customer, Marketing requirements using personal skills and industry knowledge. Ensure that the specific needs and constraints of the companies various Operations groups are effectively addressed during project execution. Serves as a vital and effective communication link between the customer and members of the internal team. Supervises, guides, coaches and develops team members to continually enhance performance. Independently interfaces with Customers, Suppliers, and companies Operations groups on both project and general dispensing technical matters. Ability to travel both domestically and internationally as required to carry out job requirements (~10%). Work with Marketing, Customers, Suppliers and other relevant sources to identify, research, develop and apply new technology to products and processes. Conduct effective presentations. Support and adhere to all system procedures and company policies / procedures. Maintain a clean and safe work environment. Follow all safety regulations. Perform other related duties assigned.Working hours: 8:00 AM - 5:00 PMSkills:Statistical Process Analysis ProficiencyFMEA, Risk Analysis, and Contingency planning experience.Education:BachelorsExperience:4-7 yearsQualifications:Training and experience in project management principles. Two to Four year Business or Technical degree as it relates to essential functions outlined above. Minimum 4 years relevant experience associated with elastomeric rubber and / or plastic products, design and manufacturing processes. Planisware experience preferred Demonstrated computer skills in Microsoft Office Applications (Word, Excel, Project and PowerPoint). Excellent written and verbal communication skills. Leadership and team influencing capabilities. Ability to work effectively with minimal supervision. Heightened sense of urgency Excellent follow up skills Do you like Leading the Team? Spherion is seeking a Project Manager. Reach out today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

This position is responsible for developing business, retaining and servicing clients in the specified geographic region.Responsibilities:DUTIES AND RESPONSIBILITIES:???Generate and develop new business to meet specified goals.???Maintain and nurture existing client relationships.???Respond to inquiries and requests in a timely and professional manner.???Function as liaison between client companies and operations staff.???Understand and communicate information regarding company products, services, and policies and procedures to new and existing clients.???Possess and maintain thorough knowledge of relevant industry product information (i.e. Rubber, Seals, Lubricants, Braking, Fuel Deliver, Battery Cooling, Automotive, Aerospace.)???Continually gather information on local competition and prevalent industry and business climate within the region; communicate information to management and others as needed.???Negotiate contracts and work agreements.???Ensure that required client paperwork is complete, accurate, and submitted on time.???Provide timely and accurate reports as required.???Attend and participate in business/trade events that impact Precix.???Attend and participate in team strategic sales meetings.???Required to travel 15-20% of the time.???Perform other duties as required or requestedWorking hours: 8:00 AM - 4:30 PMSkills:QUALIFICATIONS:--Must be a self-starter and proactive "go-getter".--Possess a commitment to excellence and high standards.--Excellent written and verbal communication skills.--Good judgement with the ability to make timely and sound decisions.--Creative, flexible, and innovative team player.--Demonstrated ability to make successful presentations to individuals and or groups at all levels of an organization.--Excellent organizational skills; able to manage priorities and workflow.--Ability to work independently and as a member of various teams and committees.--Ability to calculate figures and amounts such as discounts, interest, commissions, and percentages.--Excellent problem resolution and consultative sales skills.--Proven ability to handle multiple projects and meet deadlines.--Excellent interpersonal skills.--Ability to prepare reports and business correspondence.--Must possess versatility, flexibility, and a willingness to work within constantly changing priorities with enthusiasm.--Proficient on Microsoft Office Suite, Word, Excel, PowerPoint, WebEx, SAP, IQS, ERP systems, Email, Phone, Fax/Scan.Education:BachelorsExperience:1-4 yearsQualifications:EDUCATION AND EXPERIENCE:???Bachelor???s degree or equivalent, and one to two years of work-related experience, or equivalent in combination of education and experience. Permanent placementHealth/Dental/Vision/Life Ins.401kPTOSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Spherion Staffing is seeking an Automation Supervisor for a local client here in Sioux Falls. This person is responsible for supervising automation technicians, directing them in daily tasks, and managing larger projects. This person will also coordinate installation jobs with employees and customers to ensure jobs are completed properly and on time, and maintains proper documentation. Qualified applicants must have proficient computer skills and leadership and supervisory experience.Pay: $70,000-$90,000Hours: FTResponsibilities: -Supervising hourly automation technicians-Coordinating travel for customer installations-Ensuring proper installations by coordinating with production, engineering groups, and customers-Project management-Developing and maintaining proper documentation-Maintaining spare parts inventory; identify and order necessary parts-Training and directing techniciansResponsibilities:See AboveWorking hours: 8:00 AM - 5:00 PMSkills:Requirements: -High school diploma or appropriate equivalent-Ability to act as part of a team-Leadership and supervisory experience-Understanding of PLC controls-Skills with automated system repairs-Enthusiasm for high-performing machines-Ability to stay organized and problem-solve under pressure-Experience and understanding of manufacturing, engineering, and mechanical systems-Written and verbal communication skills-Proficiency in MS Office applications and other computer skills-Read, speak, and write in English-Ability to understand and execute written, oral, or electron instructions-Ability to read various prints and layouts-Maintain physical stamina while working with light and medium-weight componentsEducation:High SchoolExperience:4-7 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply or if you have questions you can reach out to Troy at 605-335-6010.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

This fantastic career opportunity is with one of the most reputable Wineries in the US. Working in Ceres, The Safety Specialist is responsible to develop and administer industrial company safety programs, LMS (Learning Management System), hazard identification and correction, incident/injury investigations, and compliance with workplace safety in accordance with local, state, and federal regulations on occupational health and safety.Responsibilities:* Understand and comply with all ISO9001, HACCP and GMP requirements and processes* Schedule medical evaluations as required* Maintain electronic files for all Safety documentation* Conduct New Hire Safety Orientation* Administration of LMS and other company safety programs* Administration of monthly safety tailgates and safety-related training* Organize and facilitate monthly safety committee meetings* Conduct Industrial Truck/Lift training/certification* Conduct First Aid/CPR/AED training/certification* Maintain Hazard Communication/ SDS* Hazardous Materials Management* Understand CalARP, CalEPA and CUPA regulations and assist in the reporting responsibilities including the use of CERS* Coordinate Environmental Health and Safety programs with Safety Manager* Conduct incident/injury, near miss investigations with corrective actions* Purchase safety-related equipment and maintain inventory* Inspect, evaluate, and identify workplace environments, equipment, and/or work practices with recommended corrective actions* Perform and document field audits of all safety programs* Membership in Emergency Response program and its assigned dutiesWorking hours: 6:00 AM - 3:00 PMSkills:Knowledge of:* Industrial Hygiene* Hazard Communication* OSHA and Cal-OSHA regulations* CalARP, CalEPA and CUPA regulations* Working knowledge of Confined Space, Fall Protection, Ergonomics, Respiratory Protection, production environment is preferred* Experience in reporting and developing policies Ability to:* Train, lead and motivate employees* Produce detailed written reports* Practice confidentiality, exercise discretion and use good judgment* Identify and analyze unsafe conditions, behaviors, and methods of work* Travel to multiple sites companywide as needed to ensure safety compliance and to conduct safety trainings.* Excellent communication skills with the ability to present and explain health and safety topics* Demonstrate detailed knowledge of OHSA guidelines* Remain calm in a crisis* Communicate effectively both verbally and in writing in a clear, professional manner* Outstanding organizational skills* Diligent with great attention to detailEducation:High SchoolExperience:1-4 yearsQualifications:Education/Experience:* Coursework and training in occupational safety requirements and OHSA guidelines is required* 2+ years in Environmental and Occupational Health Sciences and safety related field* Certified Safety Management Specialist (CSMS) is preferred* Proficient in MS Office Don't miss this amazing opportunity to work in the Winery Business with a highly reputable and industry leader! Please email resume to Jasonbeltz@spherion.com and/or call 209-465-1500.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law. San Francisco Fair Chance Ordinance: Qualified applicants in San Francisco with criminal histories will be considered for employment in accordance with the San Francisco Fair Chance Ordinance.

  Company in the Lemont Furnace Area looking to fill the following temp to hire Finance Coordinator position.    The Finance Coordinator will report directly to the CFO, as well as support the Staff Accountant and management team with required functions. This individual will be in charge of managing the administrative finance functions for the Company through QuickBooks, as well as Procurify, the Company’s procurement software. This position is an integral part of our operation and success.   Essential Duties and Responsibilities:   ·         Sourcing and engaging reliable suppliers and vendors. ·         Develop procurement strategies that are cost effective. ·         Negotiating with suppliers and vendors to secure advantageous terms. ·         Building and maintaining long-term relationships with vendors and suppliers. ·         Approving purchase orders and organizing and confirming delivery of goods and services. ·         Working with the CFO to control procurement spending. ·         Developing reporting metrics from Procurify software. ·         Interface data into the Company’s QuickBooks system. ·         Organize/maintain PO files and records, including data entry (electronic and hardcopy). ·         Work with department heads to manage supplies for cultivation, packaging, shipping, the lab and office. ·         Complete daily bank reconciliations for the Somerset Trust bank accounts. ·         Invoice dispensaries timely for products sold, including returns & promotional adjustments. ·         Follow up on receivable collections on a weekly basis. ·         Complete weekly check runs for payments to vendors. ·         Assist HR department with bi-weekly payroll processing. ·         Maintain accurate records in the Company’s QuickBooks system for internal financial reporting by the Staff Accountant . ·         Work with Staff Accountant to streamline & improve internal processes for efficiencies. ·         Assist with compilation of data requested by external auditors. ·         Assist with required year end tax filings, including W-2’s and Forms 1099 for vendors and interest paid. ·         Facilitate communications with Company’s 3rd party IT / helpdesk vendor. ·         Administrative support for management team at the facility, including scheduling meetings, complete expense reports, filing,           travel arrangements, open & distribute mail, etc. ·         Conform with and abide by all regulations, policies, work procedures and instructions.

Spherion Staffing & Recruiting is currently seeking loyal, dedicated and proven Assembly Production workers for a busy, fast-paced electrical connector manufacturer. Responsibities include assembling parts in a manual, hand-assembly environment. This individual will be responsible for safety checks, logging orders into the database, and inspecting parts for quality.WORK SCHEDULE:2nd Shift: 2:30PM - 10:30PM | $13.00/Hr3rd Shift: 10:30PM - 6:30AM | $13.50/HrResponsibilities:-Able to accurately produce parts by operating all manual work cells and able to achieve a minimum productivity rate of 90%.-Perform quality checks, audits and inspections to ensure products are defect free. - Follow established process and procedures to achieve 0 quality defects.-Follow standard work procedures before, during and at the end of the shift as defined by the department guidelines.-Accurately transact job in database system.-Maintain all equipment and tools within the workstation as required by the preventative maintenance schedules.-Follow all safety procedures and facility safety guidelines.-Participates in 5S and safety activities.-Complete daily inspections for quality of assembled carts.Working hours: Various Shifts AvailableSkills:-Able to learn to use measuring instruments (calipers, measuring tape, rulers)-High level of attention to detail required-Excellent hand dexterity to handle small parts and hand toolsEducation:No Degree RequiredExperience:0-1 yearsQualifications:-Excellent history of attendance and communication-Good work ethic and positive attitude-High School Diploma or equivalent-0-1 years experience in assembly environment required-Able to work well in a team environment -Must be able to sit or stand intermittently for up to 8 -12 hours daily-Must be able to bend, twist, push, pull, and lift products varying in weight, products 50lbs or less unassisted, products more than 50lbs assisted -Able to follow all safety standards and use PPE as assigned for each station-Ability to submit to full background check and drug screen Is this the job for you? Here are a few ways to apply: - Click the APPLY button on this job posting - Attend one of the weekly OPEN HOUSE events | every Monday and Wednesday | 8:30am-10:00am | Spherion Staffing | 33 Ponce de Leon Blvd | Brooksville FL 34601 - Can't make it to the open house interviews? No problem! Give us a call at 352-796-6000 to schedule an interview!- Email resume to: naturecoast-fl@spherion.comSpherion Employees are eligible for the following benefits after 45 days of continuous employment: - Medical, Dental and Vision Insurance- Life and Short-Term disability Insurance- Discount programs such as : gyms, travel, health, cell phone coverage, and moreSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Join a Team with a clear mission and core values that are exemplified from the CEO all the way down to the temporary employees! Spherion is assisting a leading manufacturer in Port Richey in adding machine operators to their positive and hard-working team.Employees will be responsible for operating and maintaining complex machinery while working in a dedicated capacity specializing in a single machine of class of machines.SHIFT SCHEDULE: Monday-Friday | 2:00pm - 10:30pm OR 2:00pm - 12:30am (depending on machine)Responsibilities:-Follow work instructions to ensure quality parts-Set up and operate production machinery in accordance with procedures and guidelines-Packing of parts in accordance with work order instructions to ensure damage free shipping-Maintain good company manufacturing standards to produce acceptable parts-Perform heat, staking, and trimming in accordance with work order instructions-Maintain cycle times and report any inefficiencies to process technician and / or supervisor-Report excessive rejects per work instruction standards-Follow IQMS and ISO standards-Recognize and report safety issues to supervisor-Maintain workstation cleanliness and organization-Communicate effectively from operator to relief operator-Perform the process and task for each job specific production mold consisting of varying levels of complexity-Use the provided approved Sample and quality documents as a guideline during productionWorking hours: Various Shifts AvailableSkills:-Pay close attention to detail and quality-Ability to stand for 8-12 or more hours per day-Ability to work overtime as needed-Ability to submit to drug screen-Ability to lift up to 30 lbs unassisted-Basic reading and math skillsEducation:High SchoolExperience:1-4 yearsQualifications:-1-2 years of machine operating experience preferred-1-2 years of assembly, production, processing work orders, and manufacturing is required-Excellent history of attendance and communication-Good work ethic and positive attitude Here are a few ways to apply: Click the APPLY button on this job posting Attend one of the weekly OPEN HOUSE events | every Monday and Wednesday | 8:30am-10:00am | Spherion Staffing | 33 Ponce de Leon Blvd | Brooksville FL 34601 Can't make it to the open house interviews? No problem! Give us a call at 352-796-6000 to schedule an interview!Email resume to: naturecoast-fl@spherion.comSpherion Employees are eligible for the following benefits after 45 days of continuous employment: - Medical, Dental and Vision Insurance- Life and Short-Term disability Insurance- Discount programs such as : gyms, travel, health, cell phone coverage, and moreSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Manufacturing SAP ProgrammerResponsibilities:This position is responsible for developing, writing, enhancing, and customizing manufacturing systems related programming and reporting for manufacturing and non-manufacturing areas within Precix. Reviewing the accuracy of the barcode data collecting process for manufacturing areas as well as shipping, receiving and inventory. Meeting with manufacturing supervision to review and discuss error logs/production reporting by error types, work centers and employees. Assisting in the correction, troubleshooting and training of the shop floor user community.Working hours: 8:00 AM - 5:00 PMSkills:Program, document, and implement bar code input scanning systems and modules designed specifically to ensure transactional controls, accountability and traceability.- Design, write, test, and implement, customizations/reports to SAP software and other manufacturing systems as needed.- Monitor transactional data interchanged between MS SQL and SAP interface tables to identify any inconsistencies and help manufacturing to develop and review Key Performance Indicators- Work closely with the rest of the IT group and User Community during upgrades, bug fixes and scheduled downtimes.- Assist IT Manager by working to a specific Project Log Listing with ownership and signoffs.- Support IT group by performing other tasks as assigned by the IT Manager.- Run and review daily error logs with each responsible manufacturing manager for root cause and corrective action.- Interface with all levels of management and end users on any manufacturing systems related process transaction, transactional, operational or barcode scanning or label issue.- Work with Receiving, Shipping and Manufacturing groups to ensure procedures and processes are in place and effectively functioning in each department.- Recommend, support, and take lead in inventory and overall transactional improvement methods.- Contact the appropriate parties with the recommended corrective action path when deficiencies are discovered. Resubmit corrections when necessary.- Generate error logs against key manufacturing areas for troubleshooting and support purposes.- Act as backup to IT Manager upon request and/or as needed due to absences or travel.- Perform other duties as required and requested.Education:BachelorsExperience:4-7 yearsQualifications:Bachelor???s degree in Computer Science or equivalent of at least 5 years of experience in computer networking and computer systems administration?? Minimum five years of experience in programming in a manufacturing environmentQUALIFICATIONS:?? Minimum five years of experience Access/SQL and/or Visual Basic programming.?? General MRP, ERP full suite experience (SAP preferred), MS Word, Excel and Access suite experience.?? Must have knowledge of barcode systems and/or training and experience in the same (customization, scan sequences, labels and report generation.?? Must have experience in barcode system set up for barcode printers, scanners, scales and related input devices.?? Must have good oral and written communication skills in English; able to write work instructions and procedures. Direct Hire/PermanentHealth/Dental/Vision401kPTOSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Join a Team with a clear mission and core values that are exemplified from the CEO all the way down to the temporary employees! Spherion is assisting a leading manufacturer in Port Richey in adding machine operators to their positive and hard-working team.Employees will be responsible for operating and maintaining complex machinery while working in a dedicated capacity specializing in a single machine of class of machines.SHIFT SCHEDULE: Monday-Friday | 9:00pm - 7:30amResponsibilities:-Follow work instructions to ensure quality parts-Set up and operate production machinery in accordance with procedures and guidelines-Packing of parts in accordance with work order instructions to ensure damage free shipping-Maintain good company manufacturing standards to produce acceptable parts-Perform heat, staking, and trimming in accordance with work order instructions-Maintain cycle times and report any inefficiencies to process technician and / or supervisor-Report excessive rejects per work instruction standards-Follow IQMS and ISO standards-Recognize and report safety issues to supervisor-Maintain workstation cleanliness and organization-Communicate effectively from operator to relief operator-Perform the process and task for each job specific production mold consisting of varying levels of complexity-Use the provided approved Sample and quality documents as a guideline during productionWorking hours: Various Shifts AvailableSkills:-Pay close attention to detail and quality-Ability to stand for 8-12 or more hours per day-Ability to work overtime as needed-Ability to submit to drug screen-Ability to lift up to 30 lbs unassisted-Basic reading and math skillsEducation:High SchoolExperience:1-4 yearsQualifications:-1-2 years of machine operating experience preferred-1-2 years of assembly, production, processing work orders, and manufacturing is required-Excellent history of attendance and communication-Good work ethic and positive attitude Here are a few ways to apply: Click the APPLY button on this job posting Attend one of the weekly OPEN HOUSE events | every Monday and Wednesday | 8:30am-10:00am | Spherion Staffing | 33 Ponce de Leon Blvd | Brooksville FL 34601 Can't make it to the open house interviews? No problem! Give us a call at 352-796-6000 to schedule an interview!Email resume to: naturecoast-fl@spherion.comSpherion Employees are eligible for the following benefits after 45 days of continuous employment: - Medical, Dental and Vision Insurance- Life and Short-Term disability Insurance- Discount programs such as : gyms, travel, health, cell phone coverage, and moreSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Spherion Staffing & Recruiting has an immediate need for full-time ASSEMBLY PRODUCTION workers for a busy, fast-paced manufacturing warehouse in Pasco County.The ideal candidate should be self-motivated, looking for a long-term career, work well in independent and time sensitive situations, and demonstrate attention to detail. The ideal candidate will also be able to work in a fast paced environment and comfortable working in a non-temperature controlled work environment. Employees will also be responsible for performing repetitive work-station or line-assembly operations to mass produce components or parts necessary to the overall production process. Assemblers will aid in the fabrication, maintenance, and repair of products and parts as necessary.SCHEDULE: Mon-Fri 6am-4:30pm | $13.00 per hourSpherion Employees are eligible for the following benefits after 45 days of continuous employment: - Medical, Dental and Vision Insurance- Life and Short-Term disability Insurance- Discount programs such as : gyms, travel, health, cell phone coverage, and moreResponsibilities:- Perform repetitive assembly operations.- Experience with controls and instrumentation, manufacturing, quality control, tooling, safety management, demonstrated focus on quality, sound judgment.- Read, study and understand print schematics, assembly instructions, and bill of materials- Use templates and measurement tools- Verify specifications, position parts, sub-assembly, examine connections, and resolve assembly problems- Maintain inventory integrity, verify receipt of supplies, replace and replenish parts and consumable items- Meet production deadlines, follow routes, processes, policies and procedures- Complete preventative maintenance requirements, following instructions, troubleshooting malfunctions and calling for repairs when needed- inspect and verify accuracy of assembled product.- Prepare jobs for change in order.- Maintain documentation within production and quality logs ? Basic computer skills- Assist other teams in different work areas if needed.- Maintain a clean workspace.- Other duties may be assigned based on the needs of the business.Working hours: 6:00 AM - 4:30 PMSkills:- Pay close attention to detail and quality- Eye to Hand coordination- Ability to regularly lift and/or move up to 40 lbs.- Work in a fast paced environment- Ability to stand or walk for 10+ hours- Perform repetitive motion type tasks regularly- Willingness to learn and be part of an awesome team- Basic computer skillsEducation:No Degree RequiredExperience:0-1 yearsQualifications:- Experience with controls and instrumentation, manufacturing, quality control, or tooling- Demonstrated focus on quality and sound judgment- Basic computer skills- Ability to work in a team environment- Excellent history of attendance and communication- Good work ethic and positive attitude- Ability to work in a non-temperature controlled work environment Is this the job for you? Here are a few ways to apply: - Click the APPLY button on this job posting - Attend one of the weekly OPEN HOUSE events | every Monday and Wednesday | 8:30am-10:00am | Spherion Staffing | 33 Ponce de Leon Blvd | Brooksville FL 34601 - Can't make it to the open house interviews? No problem! Give us a call at 352-796-6000 to schedule an interview!- Email resume to: naturecoast-fl@spherion.comSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, C

Spherion Staffing is seeking a Safety Manager to provide safety and health leadership and expertise to the operations within 7 facilities in food processing/manufacturing environment. The Safety Manager works with the safety committee and operational leaders to serve and support the plants with the implementation and maintenance of safety policies and training programs that reinforce our "safety first" culture by continuously improving our ability to prevent serious events, injuries, and fatalities, and ensuring compliance with applicable regulations.Salary $70-80k/year DOEDirect Hire OpportunityResponsibilities:- Provide technical support and professional expertise to the plant safety committees and operations leadership- Perform plant level compliance audits of implemented safety policies, to identify compliance issue and improvement opportunities- Monitor corrective actions progress and ensure closure of high-risk items identified through audits, incidents or near misses- Support creation of health, safety and environmental (HSE) goals and KPI reporting systems - Implement programs to train managers and employees in worksite safety practices Evaluate practices, procedures and facilities to assess risk and adherence to the law- Recommend solutions to issues, improvement opportunities or new prevention measures- Lead investigations and root cause analysis of serious events. Investigate accidents or incidents to discover causes- Represent the organization in meetings with industry safety groups and programs- Coordinate all aspects of workers' compensation claims- Maintain DOT compliance, including DQ files, drug testing, reasonable suspicion training, other DOT required training & DOT auditsResponsibilities:See aboveWorking hours: Various Shifts AvailableSkills:Requirements:-Bachelor's degree in Safety/Environmental field or equivalent work experience-2 or more years of manufacturing safety experience or related food/agribusiness experience-Must have a comprehensive knowledge of OSHA regulations-OSHA 10 hour safety certified-Demonstrated success in the application of safety standards, compliance with safety regulations, and the promotion of a safe working environment-Strong interpersonal skills with the ability to communicate at all levels of the organization-Strong facilitation/presentation skills with the ability to influence others-Experience working with multiple sites-Ability and willingness to travel up to 25% on a monthly basis to support facility programs (about 1 wk/mo)Education:BachelorsExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Michael Smith at 701-412-2914Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Spherion is currently seeking Blow Mold Machine Operators to fill a temp to PERMANENT position!!The Blow Mold Machine Operator will operate blow-mold, grinders, trimmer machines, and conveyor systems. They are responsible for troubleshooting process problems and performing minor maintenance to ensure continued operation of the production line.WORK SCHEDULE: 2-2-3 Rotating Shift- 12 hour shifts1st Shift: 7:00am- 7:00pm 2nd shift: 7:00pm- 7:00amResponsibilities:~ Operate blow-mold machines (including wheels, reciprocating or shuttle machines) to ensure production of quality bottles~ Perform audits, weights and quality checks~ Troubleshoot and process problems~ Perform minor maintenance to ensure continued operation of the production line ~ Ensure compliance with corporate and plant safety standards~ Repair or replace pneumatic and hydraulic lines~ Assist with preventative maintenance, mold, neck and blow pin and other mechanical changes~ Grind excess bottle and materials~ Train blow-mold employees ~ Prepare and document daily production reports, including rejects, regrinds and line efficiencies and other duties as assigned.Working hours: Various Shifts AvailableSkills:~ Attention to detail is key~ Ability to stand for 10-12 hours per day~ Ability to work in non-temperature controlled warehouse~ Ability to submit to background check and drug screen~ Basic mathematical skills & computer experienceEducation:No Degree RequiredExperience:1-4 yearsQualifications:~ 1-2 years of machine operating experience~ Excellent history of attendance and communication~ Good work ethic and positive attitude Is this the job for you? Here are a few ways to apply: - Click the APPLY button on this job posting - Attend one of the weekly OPEN HOUSE events | every Monday and Wednesday | 8:30am-10:00am | Spherion Staffing | 33 Ponce de Leon Blvd | Brooksville FL 34601 - Can't make it to the open house interviews? No problem! Give us a call at 352-796-6000 to schedule an interview!- Email resume to: naturecoast-fl@spherion.comSpherion Employees are eligible for the following benefits after 45 days of continuous employment: - Medical, Dental and Vision Insurance- Life and Short-Term disability Insurance- Discount programs such as : gyms, travel, health, cell phone coverage, and moreSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Exciting career opportunity with a National Industry Leader. Don't miss this fantastic opportunity to work along side a talented team at their Wine & Spirits Distribution Center in Tracy, CA. The Production Shift Supervisor will oversee warehousing operations, production, and productivity. Responsible for the achievement of previously determined Key Performance Indicators (KPI). Performance results will be achieved through personnel management; productivity, scheduling, safety, accuracy of product picks, quality/care of loading, timely departures of drivers, process improvements, training, development of SOP's and coordinated cooperation/communication with all internal departments. *****This is a permanent Career Opportunity with a great Compensation package, Health Benefits, 401K, Vacation / PTO, and more!Responsibilities:* Manage operations to achieve production and productivity goals.* Ensure a safe, clean, and orderly warehouse proactively addressing safety concerns as a priority.* Responsible for timely receiving of product, storage, movement, accurate picking, load integrity and timely departures of trucks (bobtail/semi).* Trains and enforces safe handling, clean up and proper documentation of breakage.* Researches and applies corrective actions for shortages, filling errors, not-on-trucks, breakage, and incorrect invoices.* Diligently complies and enforces all safety policies and procedures. * Responsible for injury/incident reports during shift hours and completion of documentation accurately/timely.* Coordinates inter-company transfers of inventory between Morgan Hill and Chino warehouses.* Promote ongoing ?best-in-class? approach to customer service throughout warehouse operations.* Responsible for creative problem resolution, teamwork, and implementation of process improvements.* Leads, directs, documents, and enforces all Company policies and procedures. Works closely with Human Resources to manage associate relations, policy interpretation and CBA compliance * Implement, maintain, and train the operational Standard Operating Procedures (SOPs).* Be willing to travel, occasionally, to support other distribution centers.* Performs other related duties as assigned* Requires timely and accurate communication between the night shift operations team, drivers/delivery, and day shift operations. Proactively communicates to ensure proper information flow.* Proactive management of warehouse leads to monitor work performance and productivity of work teams. Will hire, discipline, and make recommendations with respect to continuation of employment.Working hours: 6:00 AM - 4:00 PMSkills:This position will require the ability to read, analyze, and interpret general business periodicals, technical procedures, or governmental regulations. The supervisory role will write reports, business correspondence, and procedure manuals. Must be comfortable with and effective when presenting information and responding to and acting on feedback.Mathematical Skills:This role will require the ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. This position will require the ability to apply concepts of basic algebra and geometry.Reasoning Ability:This position will require the ability to define problems, collect data, establish facts, and draw valid conclusions. This role also will require the ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.Education:No Degree RequiredExperience:4-7 yearsQualifications:Preferred Certificates, Licenses, Registrations:Lean Six Sigma, or similar training