Thank you for subscribing to your personalized job alerts.

    86 jobs found for engineering

    Filter1
    • Industry
      Working in
      Show 86 jobs
      Clear filter
    • Location
      Location & range
        Show 86 jobs
        Clear filter
      • Job types
        Job types
        Show 86 jobs
        Clear filter
      • Salary
        Salary
        $
        Show 86 jobs
        Clear filter
      Clear all
        • Albert Lea, Minnesota
        • Permanent
        • $18.00 - $19.00 per hour
        • 6:00 AM - 2:15 PM
        Perform sub assembly and final assembly processes on a variety of mechanical and electrical assemblies. Will use calibrated equipment and machinery, engineering and simple drawings, schematics, as well as written and verbal instructions to perform basic assembly, mechanical, and electrical functions.Responsibilities:Utilize hand tools, power tools and hardware to assemble and wire standard and engineered products to customer specifications and quality standards with the aid of supervision or trainers.Apply acquired trade skills such as electrical, mechanical, and plumbing to complete assembly process.Install and troubleshoot industrial control panels. Read and build from electrical schematics. Install various types of wiring and cable tray systems. Perform job set-up by obtaining necessary/required parts, drawings, and schematics. Check for correctness of parts by referencing the bill of material. Read and interpret drawings and schematics.Communicate with engineers, designers, and technicians to resolve assembly discrepancies.Perform ongoing inspection of product during assembly and wiring process and prior to products shipment.Lift and position assemblies. Operate overhead hoist/crane to assist with the lifting and control of moving/positioning of assembly.Maintain a clean, safe, and orderly work area.Perform checks for quality of parts and adjust as required.Perform other duties as assigned.Working hours: 6:00 AM - 2:15 PMSkills:-Familiar with mechanical and electromechanical components-Able to read and interpret routings, bills of material, assembly drawings, work instructions and notes-Manual dexterity-Ability to work in a team setting-A positive can-do attitude-Motivation and communication skills-Problem solving skills-Refuse to be satisfied with average performance-Familiar with and able to read electrical schematics and symbolsEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma or equivalent2-year Electrical Degree or 2 - 5 years of related experiencePassing a pre-employment screening. Which includes a drug screen DIRECT HIRE with a 100% Employee Owned Company! Great Benefits Package! Medical & Short-Term Disability, HRA-100% Employer Contribution, Free Clinic for employees and dependents, LT Disability & Life Insurance-100% Employer Paid, PTO, Tuition Reimbursement, Wellness Programs, Employee Assistance Programs, We Care Program, Paid Holidays-1st day of employment, 401K and ESOP, Profit Sharing, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Perform sub assembly and final assembly processes on a variety of mechanical and electrical assemblies. Will use calibrated equipment and machinery, engineering and simple drawings, schematics, as well as written and verbal instructions to perform basic assembly, mechanical, and electrical functions.Responsibilities:Utilize hand tools, power tools and hardware to assemble and wire standard and engineered products to customer specifications and quality standards with the aid of supervision or trainers.Apply acquired trade skills such as electrical, mechanical, and plumbing to complete assembly process.Install and troubleshoot industrial control panels. Read and build from electrical schematics. Install various types of wiring and cable tray systems. Perform job set-up by obtaining necessary/required parts, drawings, and schematics. Check for correctness of parts by referencing the bill of material. Read and interpret drawings and schematics.Communicate with engineers, designers, and technicians to resolve assembly discrepancies.Perform ongoing inspection of product during assembly and wiring process and prior to products shipment.Lift and position assemblies. Operate overhead hoist/crane to assist with the lifting and control of moving/positioning of assembly.Maintain a clean, safe, and orderly work area.Perform checks for quality of parts and adjust as required.Perform other duties as assigned.Working hours: 6:00 AM - 2:15 PMSkills:-Familiar with mechanical and electromechanical components-Able to read and interpret routings, bills of material, assembly drawings, work instructions and notes-Manual dexterity-Ability to work in a team setting-A positive can-do attitude-Motivation and communication skills-Problem solving skills-Refuse to be satisfied with average performance-Familiar with and able to read electrical schematics and symbolsEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma or equivalent2-year Electrical Degree or 2 - 5 years of related experiencePassing a pre-employment screening. Which includes a drug screen DIRECT HIRE with a 100% Employee Owned Company! Great Benefits Package! Medical & Short-Term Disability, HRA-100% Employer Contribution, Free Clinic for employees and dependents, LT Disability & Life Insurance-100% Employer Paid, PTO, Tuition Reimbursement, Wellness Programs, Employee Assistance Programs, We Care Program, Paid Holidays-1st day of employment, 401K and ESOP, Profit Sharing, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Wilkes Barre, Pennsylvania
        • Temp to Perm
        • $16.00 - $16.50 per hour
        • 7:00 PM - 3:30 PM
        1st Shift, Monday to Friday. Assembles products and operates equipment safety, productively, and ergonomically correct while manufacturing quality parts and assemblies.Responsibilities:Daily Tasks Level 3:To be completed with instruction from a supervisor or authorized trainer.Assembles, packages and labels products.Operates equipment and tools as required.Maintains assembly jigs, hand tools and equipment in good working order.Has basic product knowledge. Know which types of wheels belong on specific products being assembled, model numbers, bearings, nuts, bolts, etc.Continuously produces at an acceptable level of productivity with some supervision. (70%)Performs other duties as assigned.Daily Tasks Level 2: In addition to above tasks.Arranges own assembly area for the efficient assembly of all products.Notifies Production Supervisor of tools in need of repair, low inventory of items used daily and poor quality of product being assembled.Produces quality finished goods with acceptable workmanship and few rejects.Maintains moderate product knowledge. Know which types of wheels belong on specific products being assembled, model numbers, bearings, nuts, bolts, etc.Consistently produces at an acceptable level of productivity with some supervision. (80%)Daily Tasks Level 1: In addition to above tasks.Verifies and refers to Bill of Materials (BOM).Prints blueprints from engineering folders.Verifies and refers to Bill of Materials (BOM).Guides small groups of associates on special tasks.Substitutes as Lead when needed.Troubleshoots problems (Products, components, tools and overall quality of products being assembled.)Produces high quality finished goods with acceptable quality and minimal rejects.Has strong product knowledge. Knows what types of wheels belong on specific products being assembled, model numbers, bearings, nuts, bolts, etc.Consistently produces at an acceptable level of productivity with very little supervision. (90%)Working hours: 7:00 PM - 3:30 PMSkills:Essential for job function requires the ability to (with or without reasonable accommodations):Balances, stoops, kneels, crouches, and reaches to work overhead.Walks or stands for a minimum of 8 hours with limited breaks.Pushes and pulls materials, fingers and grasps parts and components.Exerts up to 40 pounds of force frequently.Pays close visual acuity to perform inspections and operate machines.Tolerates extremes in weather and machine temperature.Tolerates loud noise.Extensive use with power/hand tools.Education:No Degree RequiredExperience:0-1 yearsQualifications:Previous manufacturing assembly experience preferred. Apply online TODAY at spherion.com. Once you submit your application and your resume/job history, text "Assemble" to 570.283.0433Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        1st Shift, Monday to Friday. Assembles products and operates equipment safety, productively, and ergonomically correct while manufacturing quality parts and assemblies.Responsibilities:Daily Tasks Level 3:To be completed with instruction from a supervisor or authorized trainer.Assembles, packages and labels products.Operates equipment and tools as required.Maintains assembly jigs, hand tools and equipment in good working order.Has basic product knowledge. Know which types of wheels belong on specific products being assembled, model numbers, bearings, nuts, bolts, etc.Continuously produces at an acceptable level of productivity with some supervision. (70%)Performs other duties as assigned.Daily Tasks Level 2: In addition to above tasks.Arranges own assembly area for the efficient assembly of all products.Notifies Production Supervisor of tools in need of repair, low inventory of items used daily and poor quality of product being assembled.Produces quality finished goods with acceptable workmanship and few rejects.Maintains moderate product knowledge. Know which types of wheels belong on specific products being assembled, model numbers, bearings, nuts, bolts, etc.Consistently produces at an acceptable level of productivity with some supervision. (80%)Daily Tasks Level 1: In addition to above tasks.Verifies and refers to Bill of Materials (BOM).Prints blueprints from engineering folders.Verifies and refers to Bill of Materials (BOM).Guides small groups of associates on special tasks.Substitutes as Lead when needed.Troubleshoots problems (Products, components, tools and overall quality of products being assembled.)Produces high quality finished goods with acceptable quality and minimal rejects.Has strong product knowledge. Knows what types of wheels belong on specific products being assembled, model numbers, bearings, nuts, bolts, etc.Consistently produces at an acceptable level of productivity with very little supervision. (90%)Working hours: 7:00 PM - 3:30 PMSkills:Essential for job function requires the ability to (with or without reasonable accommodations):Balances, stoops, kneels, crouches, and reaches to work overhead.Walks or stands for a minimum of 8 hours with limited breaks.Pushes and pulls materials, fingers and grasps parts and components.Exerts up to 40 pounds of force frequently.Pays close visual acuity to perform inspections and operate machines.Tolerates extremes in weather and machine temperature.Tolerates loud noise.Extensive use with power/hand tools.Education:No Degree RequiredExperience:0-1 yearsQualifications:Previous manufacturing assembly experience preferred. Apply online TODAY at spherion.com. Once you submit your application and your resume/job history, text "Assemble" to 570.283.0433Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Frederick, Maryland
        • Permanent
        • $80,000 - $90,000 per year
        • Various Shifts Available
        Spherion is helping EllumeHealth build their team in Frederick, MD for a brand new, state-of-the-art at-home COVID test kit production facility. Reporting to the VP of Operations, the Production Manager will be responsible for managing production resources and coordination of production activities. They are responsible for meeting the business requirement and delivery of volumes, yield, and cost. This will primarily be focused on production products, however integration with development programs will be required to ensure effective transfer activities. The Production Manager will develop and support Production Shift Supervisors to delivery on business requirements.If you're a motivated, hardworking individual looking for meaningful work and a chance to advance your career with a company that cares about its employees, working at Ellume Health could be great opportunity for you. #ellumehealthResponsibilities:???They will interact with production teams, quality departments, planning, warehouse & logistics, manufacturing & development, Training & HR, Finance and labor providers.???The Production Manager will manage a shift of over 300 employees???First point of all production issues in their area of responsibility.???Plan the deployment of people and resources to best meet the requirements of the production schedule and development teams.???Provide leadership to the Production team to motivate and encourage team members to meet the required standards.???Monitor and report on production yields, failures, constraints, and resolve issues affecting production output.???Manage disciplinary matters in collaboration with HR.???Resolve issues and grievances raised with the team.???Drive team training needs and flexibility to ensure team is ready to meet changes in production demand.???Collaborate with supporting roles (Quality, Engineering, Maintenance and Calibration, Warehouse and Logistics) to resolve constraints and issues impacting production.???Work in collaboration with Production Shift Supervisors to inform them of all issues impacting on production.???Develop standardized processes within the production departments to establish procedures that promote consistency, transparency, and efficiency of production.???Complete manufacturing documents according to all GMP requirements.???Compliance with QMS ??? Put Quality at the forefront of all processes and be a role model for this behavior to the team.???Understands and undertakes basic quality control/assurance procedures including the ability to recognize basic quality deviations/faults.???Support the team through communication and transparency, use the production tools, including ERP.???Follows safe work practices, reports workplace hazards and escalations.Working hours: Various Shifts AvailableSkills:GMP-Production ManagementEducation:BachelorsExperience:1-4 yearsQualifications:Bachelors Degree, 3+ years of Production Management experience, preferable within GMP assembly environment. Please email your resume to jeffreybutts@spherion.com to start a conversation today. Cell is 301-302-9731Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Spherion is helping EllumeHealth build their team in Frederick, MD for a brand new, state-of-the-art at-home COVID test kit production facility. Reporting to the VP of Operations, the Production Manager will be responsible for managing production resources and coordination of production activities. They are responsible for meeting the business requirement and delivery of volumes, yield, and cost. This will primarily be focused on production products, however integration with development programs will be required to ensure effective transfer activities. The Production Manager will develop and support Production Shift Supervisors to delivery on business requirements.If you're a motivated, hardworking individual looking for meaningful work and a chance to advance your career with a company that cares about its employees, working at Ellume Health could be great opportunity for you. #ellumehealthResponsibilities:???They will interact with production teams, quality departments, planning, warehouse & logistics, manufacturing & development, Training & HR, Finance and labor providers.???The Production Manager will manage a shift of over 300 employees???First point of all production issues in their area of responsibility.???Plan the deployment of people and resources to best meet the requirements of the production schedule and development teams.???Provide leadership to the Production team to motivate and encourage team members to meet the required standards.???Monitor and report on production yields, failures, constraints, and resolve issues affecting production output.???Manage disciplinary matters in collaboration with HR.???Resolve issues and grievances raised with the team.???Drive team training needs and flexibility to ensure team is ready to meet changes in production demand.???Collaborate with supporting roles (Quality, Engineering, Maintenance and Calibration, Warehouse and Logistics) to resolve constraints and issues impacting production.???Work in collaboration with Production Shift Supervisors to inform them of all issues impacting on production.???Develop standardized processes within the production departments to establish procedures that promote consistency, transparency, and efficiency of production.???Complete manufacturing documents according to all GMP requirements.???Compliance with QMS ??? Put Quality at the forefront of all processes and be a role model for this behavior to the team.???Understands and undertakes basic quality control/assurance procedures including the ability to recognize basic quality deviations/faults.???Support the team through communication and transparency, use the production tools, including ERP.???Follows safe work practices, reports workplace hazards and escalations.Working hours: Various Shifts AvailableSkills:GMP-Production ManagementEducation:BachelorsExperience:1-4 yearsQualifications:Bachelors Degree, 3+ years of Production Management experience, preferable within GMP assembly environment. Please email your resume to jeffreybutts@spherion.com to start a conversation today. Cell is 301-302-9731Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Saint Peter, Minnesota
        • Permanent
        • $19.75 - $33.00 per hour
        • 6:00 AM - 4:00 PM
        DIRECT HIRE- Spherion, in Partnership with ALUMACRAFT is looking for experienced MIG/TIG welders working with aluminium. We have an amazing opportunity to build and expand on your welding experience! Our client is adding a new product line to their manufacturing facility and they are in need of skilled welders for both temp-to-hire and direct hire opportunities! These positions offer 1st shift hours; Mon-Thursday from 6a.m. - 4:30 p.m. + OT as needed6aPay rates are dependent upon experience and skillset and there is opportunity for substantial increases based on performance, growth and attendance during your first year of employment -- not only that, their benefits are amazing! What a great opportunity!Responsibilities:- Operate safety equipment and use safe work habits.- Weld components in flat, vertical, or overhead positions.- Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.- Detect faulty operation of equipment or defective materials and notify supervisors.- Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material- Examine product for defects and measure to ensure conformance with specifications.- Recognize, set up, and operate hand and power tools common to the welding trade- Lay out, position, align, and secure parts and assemblies prior to assembly- Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, etc- Analyze engineering drawings, blueprints, specifications, sketches, work orders, etc.- Fill holes, and increase the size of metal parts.Working hours: 6:00 AM - 4:00 PMSkills:Ability to read and interpret work instructions and printsMeasuring and reading tolerancesEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma6+ months of MIG & TIG welding experienceAluminum welding experience required. DON'T WAIT, APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        DIRECT HIRE- Spherion, in Partnership with ALUMACRAFT is looking for experienced MIG/TIG welders working with aluminium. We have an amazing opportunity to build and expand on your welding experience! Our client is adding a new product line to their manufacturing facility and they are in need of skilled welders for both temp-to-hire and direct hire opportunities! These positions offer 1st shift hours; Mon-Thursday from 6a.m. - 4:30 p.m. + OT as needed6aPay rates are dependent upon experience and skillset and there is opportunity for substantial increases based on performance, growth and attendance during your first year of employment -- not only that, their benefits are amazing! What a great opportunity!Responsibilities:- Operate safety equipment and use safe work habits.- Weld components in flat, vertical, or overhead positions.- Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.- Detect faulty operation of equipment or defective materials and notify supervisors.- Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material- Examine product for defects and measure to ensure conformance with specifications.- Recognize, set up, and operate hand and power tools common to the welding trade- Lay out, position, align, and secure parts and assemblies prior to assembly- Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, etc- Analyze engineering drawings, blueprints, specifications, sketches, work orders, etc.- Fill holes, and increase the size of metal parts.Working hours: 6:00 AM - 4:00 PMSkills:Ability to read and interpret work instructions and printsMeasuring and reading tolerancesEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma6+ months of MIG & TIG welding experienceAluminum welding experience required. DON'T WAIT, APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Columbia Falls, Montana
        • Temp to Perm
        • $22.00 - $36.00 per hour
        • 8:00 AM - 5:00 PM
        The purpose of the Electrical Engineer is to be actively involved in the relaying of critical information between Engineering and Production. The Electrical Engineer must have strong electrical wiring and troubleshooting experience and have the ability to take direction from and collaborate with Engineers, other Designers, Drafters, and Production staff in an efficient team environment. They are responsible for creating accurate, sensible, and consistent electrical schematics within set timelines to enable Production to succeed in producing specialty vehicles to the level of precision and functionality engineered by the Engineering team.Responsibilities:-Create Production-ready electrical schematics based on information from Engineering drawings, -Create &/or use standard drawing templates for consistency, error reduction, and speed in the production of schematics. Use Electra software to create schematics. -Maintain an electronic database (Excel or similar) to track components, available wire, etc. -Produce calculations to track loads on each wire, and the entire vehicle, to assist with the correct sizing of generators, shore power, etc. -Balance loads to each line. -Correctly size all wires, fuses, breakers, loads, etc. Correctly label all wires. -Communicate with Engineering to identify and resolve differences between Electrical drawings, mechanical drawings, and Specs & PN. -Communicate requirements for customized equipment to vendors, and work effectively with the Purchasing Department to get items ordered promptly. -Create Excel-based spreadsheets to generate BOMs for electrical components. -Assist Engineering in gathering critical information required to correctly wire the final product and recommending new or improved products-Working with Production to ensure that wiring schematics are accurate and useful. Implementing improvements as needed to the electrical schematics process. -Daily track and record work hours for each specific project. -Willing, on a very limited basis, to travel as needed by Management.Working hours: 8:00 AM - 5:00 PMSkills:-Must be comfortable and knowledgeable with using Microsoft Office (Excel, Word, and Outlook). Abilities with Microsoft Access are also helpful. -Understanding of electrical loads, fuses, wire capacities, resistors, diodes, relays, etc. -Knowledge of National Electric Code. At a minimum, how to access code, and how to find information within the code. -Able to provide documentation, detailed instructions, drawings, or specifications to tell others about how devices, parts, or equipment are to be fabricated, constructed, assembled, modified, maintained, or used. -Knowledge of relevant equipment, policies, procedures, and strategies to promote the protection of people, data, property, and institutions to always promote a safe work environment. -Knowledge to be able to operate a variety of current tools to include, but not limit to capacitance meters, electronic measuring probes, frequency analyzers, frequency counters or time or dividers, micro-controllers, multi-meters, network analyzers, oscilloscopes, personal computers, plotter printers, power meters, signal generators, soldering iron, voltage or current meters, crimpers, hand tools, data-loggers, design software.Education:High SchoolExperience:1-4 yearsQualifications:-High School Diploma or GED acquired, Bachelor's Degree in a related field is preferred. -Minimum 2 years of verifiable work history as an Electrical Engineer, or equivalent occupation.-Ability to pass a background check Apply online today at www.spherion.com/apply/75034Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        The purpose of the Electrical Engineer is to be actively involved in the relaying of critical information between Engineering and Production. The Electrical Engineer must have strong electrical wiring and troubleshooting experience and have the ability to take direction from and collaborate with Engineers, other Designers, Drafters, and Production staff in an efficient team environment. They are responsible for creating accurate, sensible, and consistent electrical schematics within set timelines to enable Production to succeed in producing specialty vehicles to the level of precision and functionality engineered by the Engineering team.Responsibilities:-Create Production-ready electrical schematics based on information from Engineering drawings, -Create &/or use standard drawing templates for consistency, error reduction, and speed in the production of schematics. Use Electra software to create schematics. -Maintain an electronic database (Excel or similar) to track components, available wire, etc. -Produce calculations to track loads on each wire, and the entire vehicle, to assist with the correct sizing of generators, shore power, etc. -Balance loads to each line. -Correctly size all wires, fuses, breakers, loads, etc. Correctly label all wires. -Communicate with Engineering to identify and resolve differences between Electrical drawings, mechanical drawings, and Specs & PN. -Communicate requirements for customized equipment to vendors, and work effectively with the Purchasing Department to get items ordered promptly. -Create Excel-based spreadsheets to generate BOMs for electrical components. -Assist Engineering in gathering critical information required to correctly wire the final product and recommending new or improved products-Working with Production to ensure that wiring schematics are accurate and useful. Implementing improvements as needed to the electrical schematics process. -Daily track and record work hours for each specific project. -Willing, on a very limited basis, to travel as needed by Management.Working hours: 8:00 AM - 5:00 PMSkills:-Must be comfortable and knowledgeable with using Microsoft Office (Excel, Word, and Outlook). Abilities with Microsoft Access are also helpful. -Understanding of electrical loads, fuses, wire capacities, resistors, diodes, relays, etc. -Knowledge of National Electric Code. At a minimum, how to access code, and how to find information within the code. -Able to provide documentation, detailed instructions, drawings, or specifications to tell others about how devices, parts, or equipment are to be fabricated, constructed, assembled, modified, maintained, or used. -Knowledge of relevant equipment, policies, procedures, and strategies to promote the protection of people, data, property, and institutions to always promote a safe work environment. -Knowledge to be able to operate a variety of current tools to include, but not limit to capacitance meters, electronic measuring probes, frequency analyzers, frequency counters or time or dividers, micro-controllers, multi-meters, network analyzers, oscilloscopes, personal computers, plotter printers, power meters, signal generators, soldering iron, voltage or current meters, crimpers, hand tools, data-loggers, design software.Education:High SchoolExperience:1-4 yearsQualifications:-High School Diploma or GED acquired, Bachelor's Degree in a related field is preferred. -Minimum 2 years of verifiable work history as an Electrical Engineer, or equivalent occupation.-Ability to pass a background check Apply online today at www.spherion.com/apply/75034Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Kalispell, Montana
        • Permanent
        • $25.00 - $40.00 per hour
        • 7:00 AM - 4:00 PM
        Precision machine shop in Kalispell Montana manufacturing commercial rocket engine components is seeking a machinist to machine precision parts using CNC mills and/or lathes following engineering drawings and verbal instructions.Responsibilities:-Set up and operates CNC mills and CNC lathes-Machines simple to complex parts to print specifications-Writes programs and edits existing programs-Works with minimal supervision-Directs and trains less experienced machinists-Fixture design and manufacturing-Completes set-up sheets and all shop related documents-Deburr's jobs while in production and as needed upon completion-Keeps workplace safe, clean and organizedWorking hours: 7:00 AM - 4:00 PMSkills:-Strong mechanical aptitude and machining background with a focus on prototype and close tolerances while machining high temp alloys-Ability to run CNC machines including mills and lathes.-Good math skills including geometry, algebra and trigonometry-Ability to write and perform edits of CNC machining programs-Proven ability to read blueprints, engineering drawings and proficient use of measuring and gauging instruments.- Working knowledge of GD&TEducation:High SchoolExperience:10+ yearsQualifications:-Typically requires a High School Diploma, technical/trade school training or equivalent-10+ plus years related experience-Must be a US Citizen as defined by ITAR. Company offers a Great Salary, benefit package and relocating package are available also!Apply online today at www.spherion.com/apply/75034 or contact us at 406-470-7300 for additional information.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Precision machine shop in Kalispell Montana manufacturing commercial rocket engine components is seeking a machinist to machine precision parts using CNC mills and/or lathes following engineering drawings and verbal instructions.Responsibilities:-Set up and operates CNC mills and CNC lathes-Machines simple to complex parts to print specifications-Writes programs and edits existing programs-Works with minimal supervision-Directs and trains less experienced machinists-Fixture design and manufacturing-Completes set-up sheets and all shop related documents-Deburr's jobs while in production and as needed upon completion-Keeps workplace safe, clean and organizedWorking hours: 7:00 AM - 4:00 PMSkills:-Strong mechanical aptitude and machining background with a focus on prototype and close tolerances while machining high temp alloys-Ability to run CNC machines including mills and lathes.-Good math skills including geometry, algebra and trigonometry-Ability to write and perform edits of CNC machining programs-Proven ability to read blueprints, engineering drawings and proficient use of measuring and gauging instruments.- Working knowledge of GD&TEducation:High SchoolExperience:10+ yearsQualifications:-Typically requires a High School Diploma, technical/trade school training or equivalent-10+ plus years related experience-Must be a US Citizen as defined by ITAR. Company offers a Great Salary, benefit package and relocating package are available also!Apply online today at www.spherion.com/apply/75034 or contact us at 406-470-7300 for additional information.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Columbia Falls, Montana
        • Permanent
        • $25.00 - $35.00 per hour
        • 8:00 AM - 5:00 PM
        Local Company is seeking an Experienced Mechanical Design Engineer. Will be responsible for taking designs from concept through production by creating parts and assemblies and compiling them into complete Production-ready project models and CAD. Accuracy and completeness must be maintained through all levels of design in order to provide complete BOMs for Purchasing and CAD for the Production teams.Responsibilities:- Use SolidWorks to create complete solid models of each project. This will include section levels, assemblies, & parts as needed.-Create complete & accurate BOMs of each project.-Create accurate and manufacturing-friendly drawings (CAD) for each project.-Create accurate parts and assemblies, complete with all assigned properties for use within top-level models.-All documentation required for Production needs to be accurate, complete and finished within established time frames as agreed upon by the Operations team.-Analyze proposed design changes and communicate their assessment of the changes effect upon engineering time, production time and the associated hard costs.-Analyze parts and assemblies and design them to optimize cost, strength, and manufacturability as needed.-Use FEA to analyze parts, perform stress calculations, create tests to verify results, document analysis, and change parts as needed to optimize the design.-Research, read, and understand outside standards such as MIL-SPECs, RVIA code, NEC, etc.-Create, implement, supervise, and document tests verifying designs meet customer requirements.-Responsible for making sure that the correct documents are available to the correct people in Production.-Communicate with vendors to troubleshoot designs, get information on new designs, and obtain drawings and models of components.-Analyze proposed Change Orders and communicate their assessment of the proposed Change Order's:o Affect upon the Project's original design parameters, timeline and budgeto Estimated engineering time for completion of the change.o Feasibility given the Project's parameters as well as other Project demands upon Engineering.-Assist Sales and Marketing by creating models and CAD that can be used in proposals to customers.-Utilize Mastercam to create part files and nest files for cutting parts on the CNC router.Working hours: 8:00 AM - 5:00 PMSkills:-Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services.-Knowledge of raw material, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.-Knowledge and prediction of physical principles, laws, their interrelationships, and applications to understanding fluid, material, and atmospheric dynamics, and mechanical, electrical, atomic and sub-atomic structures and processes.-Previous knowledge gained from past experience with Solidworks.Education:BachelorsExperience:4-7 yearsQualifications:-Bachelor of Science in Engineering.-3+ years of related experience in a custom manufacturing environment.-Experience with Solidworks modeling and CAD documentation.-An equivalent combination of education and experience which provides proficiency in the areas of responsibility listed may be substituted for the above requirements.-Ability to pass a background check Apply online today at www.spherion.com/apply/75034Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking
        Local Company is seeking an Experienced Mechanical Design Engineer. Will be responsible for taking designs from concept through production by creating parts and assemblies and compiling them into complete Production-ready project models and CAD. Accuracy and completeness must be maintained through all levels of design in order to provide complete BOMs for Purchasing and CAD for the Production teams.Responsibilities:- Use SolidWorks to create complete solid models of each project. This will include section levels, assemblies, & parts as needed.-Create complete & accurate BOMs of each project.-Create accurate and manufacturing-friendly drawings (CAD) for each project.-Create accurate parts and assemblies, complete with all assigned properties for use within top-level models.-All documentation required for Production needs to be accurate, complete and finished within established time frames as agreed upon by the Operations team.-Analyze proposed design changes and communicate their assessment of the changes effect upon engineering time, production time and the associated hard costs.-Analyze parts and assemblies and design them to optimize cost, strength, and manufacturability as needed.-Use FEA to analyze parts, perform stress calculations, create tests to verify results, document analysis, and change parts as needed to optimize the design.-Research, read, and understand outside standards such as MIL-SPECs, RVIA code, NEC, etc.-Create, implement, supervise, and document tests verifying designs meet customer requirements.-Responsible for making sure that the correct documents are available to the correct people in Production.-Communicate with vendors to troubleshoot designs, get information on new designs, and obtain drawings and models of components.-Analyze proposed Change Orders and communicate their assessment of the proposed Change Order's:o Affect upon the Project's original design parameters, timeline and budgeto Estimated engineering time for completion of the change.o Feasibility given the Project's parameters as well as other Project demands upon Engineering.-Assist Sales and Marketing by creating models and CAD that can be used in proposals to customers.-Utilize Mastercam to create part files and nest files for cutting parts on the CNC router.Working hours: 8:00 AM - 5:00 PMSkills:-Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services.-Knowledge of raw material, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.-Knowledge and prediction of physical principles, laws, their interrelationships, and applications to understanding fluid, material, and atmospheric dynamics, and mechanical, electrical, atomic and sub-atomic structures and processes.-Previous knowledge gained from past experience with Solidworks.Education:BachelorsExperience:4-7 yearsQualifications:-Bachelor of Science in Engineering.-3+ years of related experience in a custom manufacturing environment.-Experience with Solidworks modeling and CAD documentation.-An equivalent combination of education and experience which provides proficiency in the areas of responsibility listed may be substituted for the above requirements.-Ability to pass a background check Apply online today at www.spherion.com/apply/75034Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking
        • Colorado Springs, Colorado
        • Permanent
        • $70,000 - $90,000 per year
        • 8:00 AM - 5:00 PM
        We provide local staffing with a personal touch! Simply put, at Spherion we find people jobs and love what we do!We are currently looking to hire a Process Engineer for one of our clients located in Colorado Springs.Responsibilities:As an Engineering consultant you will be responsible for- Create and maintain proper documentation- Participate in the continuous improvement and 5S processes- Evaluate manufacturing processes by designing and conducting research programs, applyingknowledge of product design, fabrication, assembly, tooling and materials- Confer with equipment vendors, solicit observations from operators, work closely withpurchasing and production control for material and scheduling information- Develops manufacturing processes by studying product requirements. Researching, designing,modifying, and testing manufacturing methods.- Improve manufacturing efficiency by planning workflow, space requirements and equipmentlayout- Assure product and process quality by establishing standard operating procedures- Provide manufacturing engineering information by calculating production, labor, and materialcosts. Reviewing production schedules and estimating future forecasts- Provide manufacturing engineering information by answering questions and request fromcustomers and operators.- Keep equipment and tooling updated and operational by coordinating maintenance and repairservices.- Maintain professional and technical knowledge by attending educational workshops, reviewingprofessional publications, establishing personal networks.- Contributes to team efforts by helping operate equipment as needed.Working hours: 8:00 AM - 5:00 PMSkills:A Candidate that works at this client will need:Experience with Process Validation, Equipment maintenanceMechanical aptitude and experienceEngineering skills and experienceA Strong eye for detail and qualityTechnical writing and documentation skillsEducation:BachelorsExperience:4-7 yearsQualifications:Bachelor?s degree in Mechanical EngineeringMust have 2 years of mechanical engineering experienceMust have 2 years of experience in technical writing and documentation experienceKnowledge of Microsoft Office programs is a mustExperience in leading process improvements on the line.Lean manufacturing experience. Kaizen, 5S, and Six Sigma experience helpful. Interested in this opportunity? Call Us! 719-284-7220Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        We provide local staffing with a personal touch! Simply put, at Spherion we find people jobs and love what we do!We are currently looking to hire a Process Engineer for one of our clients located in Colorado Springs.Responsibilities:As an Engineering consultant you will be responsible for- Create and maintain proper documentation- Participate in the continuous improvement and 5S processes- Evaluate manufacturing processes by designing and conducting research programs, applyingknowledge of product design, fabrication, assembly, tooling and materials- Confer with equipment vendors, solicit observations from operators, work closely withpurchasing and production control for material and scheduling information- Develops manufacturing processes by studying product requirements. Researching, designing,modifying, and testing manufacturing methods.- Improve manufacturing efficiency by planning workflow, space requirements and equipmentlayout- Assure product and process quality by establishing standard operating procedures- Provide manufacturing engineering information by calculating production, labor, and materialcosts. Reviewing production schedules and estimating future forecasts- Provide manufacturing engineering information by answering questions and request fromcustomers and operators.- Keep equipment and tooling updated and operational by coordinating maintenance and repairservices.- Maintain professional and technical knowledge by attending educational workshops, reviewingprofessional publications, establishing personal networks.- Contributes to team efforts by helping operate equipment as needed.Working hours: 8:00 AM - 5:00 PMSkills:A Candidate that works at this client will need:Experience with Process Validation, Equipment maintenanceMechanical aptitude and experienceEngineering skills and experienceA Strong eye for detail and qualityTechnical writing and documentation skillsEducation:BachelorsExperience:4-7 yearsQualifications:Bachelor?s degree in Mechanical EngineeringMust have 2 years of mechanical engineering experienceMust have 2 years of experience in technical writing and documentation experienceKnowledge of Microsoft Office programs is a mustExperience in leading process improvements on the line.Lean manufacturing experience. Kaizen, 5S, and Six Sigma experience helpful. Interested in this opportunity? Call Us! 719-284-7220Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Colorado Springs, Colorado
        • Temporary
        • $20.00 - $24.00 per hour
        • 8:00 AM - 5:00 PM
        We provide local staffing with a personal touch! Simply put, at Spherion we find people jobs and love what we do!We are currently looking to hire a Quality Inspector for one of our clients located in Colorado Springs. This role is a temporary position. Some reasons you might enjoy working as a Quality Inspector at this client: You're experienced in quality control inspecting (experience with medical devices is a plus)You have an eye for detailYou thrive in a fast-paced environment where you can impact and benefit people's livesResponsibilities:As a Quality Inspector you will be responsible for:Performing visual, dimensional, and functional inspections on consumable products, laser systems, subassemblies, fixtures, and raw material. Utilizing and training others to use various measuring equipment to determine component acceptance.Performing complex First Article Inspections; gathering data and submitting reportsReviewing DHRs and LHRs for Good Documentation Practices. Interfacing with Engineering, Quality, and Production Teammates to communicate quality standards and address issues in a timely manner. Preparing area and participate in internal and external quality audits. Accurately training inspectors in Receiving Inspection areas minimizing quality mistakes. Controlling nonconforming material and assist in release of quarantine product; which includes: creating, verifying, and closing nonconforming reports. Drafting and generate SOP changes a using web based documentation system. Identifying improvement opportunities and give input to procedure and process updates. Successfully working in and promoting a team oriented environment; reduce work area distractions. Equipment and Systems Used: Micrometers Video micrometer Pin gauges Surface height indicator Digital and manual calipers Optical comparator Video inspection system Microscope Laser energy meters Optical alignment fixtures MicroVu CMM (Coordinate Measuring Machine) OGP CMM Instron pull test equipment Digital multi-function meters Computer based Learning System Agile documentation system Oracle ApplicationsWorking hours: 8:00 AM - 5:00 PMSkills:If you enjoy a fast-paced environment that allows you to grow your skills as a Quality Inspector, then this could be the opportunity for you!A Quality Inspector that works at this client will need:Experience working in manufacturing (specifically with medical devices)Strong attention to detail (previous experience quality inspecting is preferred)Understand and inspect mechanical assemblies and electronic circuits. Understand and utilize Zero Acceptance Sampling Plans using AQL sampling and 100% inspection. Through knowledge and understanding of Geometric Dimensioning and Tolerancing (GD&T) and inspection techniques. Proficiency with the utilization and programming of coordinate measuring machine (CMM)Education:High SchoolExperience:4-7 yearsQualifications:High School diploma or equivalent required Minimum 5 years experience in medical device Quality Control InspectionProficient at reading drawings with GD&T and Understanding of CMMsAbility to lift and work with parts or sub-assemblies weighing up to 50lbs Strong computer abilities; web based systems, Microsoft Office, Material and Document Control Software Excellent training abilities and skill IPC 610 and IPC 620 Certifications (desired) Interested in this opportunity? Call Us! 719-284-7220Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skill
        We provide local staffing with a personal touch! Simply put, at Spherion we find people jobs and love what we do!We are currently looking to hire a Quality Inspector for one of our clients located in Colorado Springs. This role is a temporary position. Some reasons you might enjoy working as a Quality Inspector at this client: You're experienced in quality control inspecting (experience with medical devices is a plus)You have an eye for detailYou thrive in a fast-paced environment where you can impact and benefit people's livesResponsibilities:As a Quality Inspector you will be responsible for:Performing visual, dimensional, and functional inspections on consumable products, laser systems, subassemblies, fixtures, and raw material. Utilizing and training others to use various measuring equipment to determine component acceptance.Performing complex First Article Inspections; gathering data and submitting reportsReviewing DHRs and LHRs for Good Documentation Practices. Interfacing with Engineering, Quality, and Production Teammates to communicate quality standards and address issues in a timely manner. Preparing area and participate in internal and external quality audits. Accurately training inspectors in Receiving Inspection areas minimizing quality mistakes. Controlling nonconforming material and assist in release of quarantine product; which includes: creating, verifying, and closing nonconforming reports. Drafting and generate SOP changes a using web based documentation system. Identifying improvement opportunities and give input to procedure and process updates. Successfully working in and promoting a team oriented environment; reduce work area distractions. Equipment and Systems Used: Micrometers Video micrometer Pin gauges Surface height indicator Digital and manual calipers Optical comparator Video inspection system Microscope Laser energy meters Optical alignment fixtures MicroVu CMM (Coordinate Measuring Machine) OGP CMM Instron pull test equipment Digital multi-function meters Computer based Learning System Agile documentation system Oracle ApplicationsWorking hours: 8:00 AM - 5:00 PMSkills:If you enjoy a fast-paced environment that allows you to grow your skills as a Quality Inspector, then this could be the opportunity for you!A Quality Inspector that works at this client will need:Experience working in manufacturing (specifically with medical devices)Strong attention to detail (previous experience quality inspecting is preferred)Understand and inspect mechanical assemblies and electronic circuits. Understand and utilize Zero Acceptance Sampling Plans using AQL sampling and 100% inspection. Through knowledge and understanding of Geometric Dimensioning and Tolerancing (GD&T) and inspection techniques. Proficiency with the utilization and programming of coordinate measuring machine (CMM)Education:High SchoolExperience:4-7 yearsQualifications:High School diploma or equivalent required Minimum 5 years experience in medical device Quality Control InspectionProficient at reading drawings with GD&T and Understanding of CMMsAbility to lift and work with parts or sub-assemblies weighing up to 50lbs Strong computer abilities; web based systems, Microsoft Office, Material and Document Control Software Excellent training abilities and skill IPC 610 and IPC 620 Certifications (desired) Interested in this opportunity? Call Us! 719-284-7220Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skill
        • Colorado Springs, Colorado
        • Temporary
        • $60.00 - $65.00 per hour
        • Various Shifts Available
        We provide local staffing with a personal touch! Simply put, at Spherion we find people jobs and love what we do!We are currently looking to hire a Change Management Specialist for a medical device manufacturers located in North Colorado SpringsResponsibilities:ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.? Create appropriate tasks in the Product Lifecycle Management (PLM) system to execute approved design changes including the proper sequencing of implementation and maintenance of records documenting design changes.? Translate high level change requests into individual, detailed change tasks.? Support New Product Introduction teams in DHF and DMR releases. Of critical importance is to ensure adequate support prior to critical project gates and milestones.? Perform periodic review and collaborates updates of C&CM procedures as peripheral tools, and performs test of PLM tool as needed.? Support PLM software updates by participating in demonstrations, UATs, training sessions and updating procedures. Review implementation plans and/or updates to peripheral tools or processes that may affect the way of working with the PLM system. Work with PLM end users to provide guidance on best practices and ways of working.Working hours: Various Shifts AvailableSkills:To succeed in this role, you should have the following skills and experience- Strong attention to detail.- Strong organizational skills and ability to prioritize workflow to meet established timeframes.- Ability to coordinate the work of others, monitor work for accuracy and provide appropriate feedback as needed.- Strong interpersonal communication skills to drive timely and accurate results.- Proven experience working with product and process change implementation.- Ability to maintain updated knowledge of procedures, products, key employee contacts and activities of assigned area.- Ability to work under pressure.Education:BachelorsExperience:4-7 yearsQualifications:? Bachelor of Science degree in a Technical, Science, or Engineering discipline preferred but not required. The appropriate technical or associate degree and experience combination will be sufficient.? Must have working knowledge of 21 CFR 820, 21 CFR Part 11 and ISO 13485.? Experience with Windchill PLM strongly desired.? Advanced Microsoft Office skills: Word: Forms, Mail Merge, Index and Tables Excel: Forms, Formulas, & Graphs.? Will be required to travel up to 10% of time to travel both domestically and internationally to IGT-Devices offices, depending on the needs of the company.? Baseline Engineering skills or comfortable in the setting with terminology and basics. Interested in this opportunity? Call Us! 719-284-7220Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.For Colorado Residents Only: The hourly range for Colorado residents is $15.00 to $25.00/hour. Pay is based on several factors including but not limited to education, work experience, certifications, etc. In addition to your salary, Spherion offers a comprehensive benefits package, incentive and recognition program, and 401K contribution (all benefits are based on eligibility).
        We provide local staffing with a personal touch! Simply put, at Spherion we find people jobs and love what we do!We are currently looking to hire a Change Management Specialist for a medical device manufacturers located in North Colorado SpringsResponsibilities:ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.? Create appropriate tasks in the Product Lifecycle Management (PLM) system to execute approved design changes including the proper sequencing of implementation and maintenance of records documenting design changes.? Translate high level change requests into individual, detailed change tasks.? Support New Product Introduction teams in DHF and DMR releases. Of critical importance is to ensure adequate support prior to critical project gates and milestones.? Perform periodic review and collaborates updates of C&CM procedures as peripheral tools, and performs test of PLM tool as needed.? Support PLM software updates by participating in demonstrations, UATs, training sessions and updating procedures. Review implementation plans and/or updates to peripheral tools or processes that may affect the way of working with the PLM system. Work with PLM end users to provide guidance on best practices and ways of working.Working hours: Various Shifts AvailableSkills:To succeed in this role, you should have the following skills and experience- Strong attention to detail.- Strong organizational skills and ability to prioritize workflow to meet established timeframes.- Ability to coordinate the work of others, monitor work for accuracy and provide appropriate feedback as needed.- Strong interpersonal communication skills to drive timely and accurate results.- Proven experience working with product and process change implementation.- Ability to maintain updated knowledge of procedures, products, key employee contacts and activities of assigned area.- Ability to work under pressure.Education:BachelorsExperience:4-7 yearsQualifications:? Bachelor of Science degree in a Technical, Science, or Engineering discipline preferred but not required. The appropriate technical or associate degree and experience combination will be sufficient.? Must have working knowledge of 21 CFR 820, 21 CFR Part 11 and ISO 13485.? Experience with Windchill PLM strongly desired.? Advanced Microsoft Office skills: Word: Forms, Mail Merge, Index and Tables Excel: Forms, Formulas, & Graphs.? Will be required to travel up to 10% of time to travel both domestically and internationally to IGT-Devices offices, depending on the needs of the company.? Baseline Engineering skills or comfortable in the setting with terminology and basics. Interested in this opportunity? Call Us! 719-284-7220Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.For Colorado Residents Only: The hourly range for Colorado residents is $15.00 to $25.00/hour. Pay is based on several factors including but not limited to education, work experience, certifications, etc. In addition to your salary, Spherion offers a comprehensive benefits package, incentive and recognition program, and 401K contribution (all benefits are based on eligibility).
        • Champaign, Illinois
        • Temporary
        • $15.00 - $18.00 per hour
        • 8:00 AM - 5:00 PM
        A local global leader in metal flow engineering is in need of an individual who is experienced in Accounts Payable and using software. This position supports the department goals of timely and accurate disbursement of payments to suppliers, while insuring compliance with company policies, values and statutory regulations with excellent customer service and commitment to safety. Remote Work Opportunity!Responsibilities:-Timely and accurate data entry into computer system-Problem invoice resolution-Mail sorting; AP email box processing, scanning invoices to East Access-Monitor, process and resolve invoices on Easy Access platform-Review of co-worker's invoice batches-Thorough and accurate invoice/expense accrual-Review of co-worker's invoice batches-Thorough and accurate invoice/expense accrual-Filing of processed invoices-Use of Excel to aid in processing complex billings-Maintenance of expenses reporting database & audit of reports-Main interactions internal: Contact other AP Specialists, AP Supervisor, Purchasing Department, Accounting Department and other sites in United States daily-Main interactions external: Contact United States suppliers dailyWorking hours: 8:00 AM - 5:00 PMSkills:Must be capable of handling numerous entries per weekJD Edwards accounting software preferred but not requiredSAP B1 accounting software preferred but not requiredUnderstanding of accounting principlesMust be proficient in Microsoft Office, especially ExcelMust have excellent attention to detailAbility to effectively communicate verbally and in writingContribute to a productive and positive work environmentInteract with others with integrity and respectEducation:High SchoolExperience:1-4 yearsQualifications:-High School diploma or equivalent-Associates degree preferred-One to two years of accounts payable-Accounts payable experience in manufacturing environment preferred Go to www.spherion.com/apply to complete an online application or send resumes to cindysomers@spherion.com. For more information call 217-359-4488.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        A local global leader in metal flow engineering is in need of an individual who is experienced in Accounts Payable and using software. This position supports the department goals of timely and accurate disbursement of payments to suppliers, while insuring compliance with company policies, values and statutory regulations with excellent customer service and commitment to safety. Remote Work Opportunity!Responsibilities:-Timely and accurate data entry into computer system-Problem invoice resolution-Mail sorting; AP email box processing, scanning invoices to East Access-Monitor, process and resolve invoices on Easy Access platform-Review of co-worker's invoice batches-Thorough and accurate invoice/expense accrual-Review of co-worker's invoice batches-Thorough and accurate invoice/expense accrual-Filing of processed invoices-Use of Excel to aid in processing complex billings-Maintenance of expenses reporting database & audit of reports-Main interactions internal: Contact other AP Specialists, AP Supervisor, Purchasing Department, Accounting Department and other sites in United States daily-Main interactions external: Contact United States suppliers dailyWorking hours: 8:00 AM - 5:00 PMSkills:Must be capable of handling numerous entries per weekJD Edwards accounting software preferred but not requiredSAP B1 accounting software preferred but not requiredUnderstanding of accounting principlesMust be proficient in Microsoft Office, especially ExcelMust have excellent attention to detailAbility to effectively communicate verbally and in writingContribute to a productive and positive work environmentInteract with others with integrity and respectEducation:High SchoolExperience:1-4 yearsQualifications:-High School diploma or equivalent-Associates degree preferred-One to two years of accounts payable-Accounts payable experience in manufacturing environment preferred Go to www.spherion.com/apply to complete an online application or send resumes to cindysomers@spherion.com. For more information call 217-359-4488.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Owatonna, Minnesota
        • Temporary
        • $18.00 - $20.00 per hour
        • 7:30 AM - 3:30 PM
        The Documentation Specialist will work closely with Manufacturing Engineering and production to develop and maintain standard documentation.Responsibilities:Routinely will create visual aids for associates to better understand work procedures.Documents will be periodically checked with production for accuracy.Develop electronic storage system that houses all assembly procedures in controlled method.Working hours: 7:30 AM - 3:30 PMSkills:Capable of creating visual aids through photographs and Office productsPrevious production experience (preferred but not required)Education:High SchoolExperience:1-4 yearsQualifications:Must be proficient in Microsoft Office Products (Excel, Word, PowerPoint,)Proficient in Microsoft Visio (preferred but not required) Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        The Documentation Specialist will work closely with Manufacturing Engineering and production to develop and maintain standard documentation.Responsibilities:Routinely will create visual aids for associates to better understand work procedures.Documents will be periodically checked with production for accuracy.Develop electronic storage system that houses all assembly procedures in controlled method.Working hours: 7:30 AM - 3:30 PMSkills:Capable of creating visual aids through photographs and Office productsPrevious production experience (preferred but not required)Education:High SchoolExperience:1-4 yearsQualifications:Must be proficient in Microsoft Office Products (Excel, Word, PowerPoint,)Proficient in Microsoft Visio (preferred but not required) Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • scottdale, Pennsylvania
        • Permanent
        • $40000.00 - $50000.00 per hour
        Direct Hire -- Quality Technician You will be responsible to help maintain a quality management system as you routinely interact with our manufacturing team, key suppliers, customers and sale representatives. You will support product development and product qualification, implementation of new manufacturing processes, as well as work with inspection techniques and equipment. The ideal candidate is a recent College or Technical school graduate that possesses an associate degree in Engineering or a related Technical degree. Candidate should possess 2-3 years’ experience in the metals processing or metals industry is desired, but other equivalent experience or less experience is acceptable. Participation in an Internship program in related field will be considered. Experience working within quality management systems such as ISO 9001, AS9100, ASME NCA 3800 or equivalent is preferred, but most importantly we require someone that is a highly motivated problem solver.
        Direct Hire -- Quality Technician You will be responsible to help maintain a quality management system as you routinely interact with our manufacturing team, key suppliers, customers and sale representatives. You will support product development and product qualification, implementation of new manufacturing processes, as well as work with inspection techniques and equipment. The ideal candidate is a recent College or Technical school graduate that possesses an associate degree in Engineering or a related Technical degree. Candidate should possess 2-3 years’ experience in the metals processing or metals industry is desired, but other equivalent experience or less experience is acceptable. Participation in an Internship program in related field will be considered. Experience working within quality management systems such as ISO 9001, AS9100, ASME NCA 3800 or equivalent is preferred, but most importantly we require someone that is a highly motivated problem solver.
        • Erie, Pennsylvania
        • Temp to Perm
        • $13.00 - $14.00, per hour, 13.00
        • You pick the shift that works for you
        Great opportunity to join a growing company in the local community. If you have experience in auto, welding, metal fabrication and want to be able to pick the shift that works for you, this job's for you! Basic experience required, training will be provided on 1st shift 7am until 3:30pm. This is an exciting opportunity. Great entry level engineering opportunity. Must be able to read basic blueprints.  This opportunity will allow you to work on cutting edge military and hospital equipment.    Great small team experience working with talented Engineers making products that matter! Apply today by sending your resume to Erie-Pa@spherion.com.  
        Great opportunity to join a growing company in the local community. If you have experience in auto, welding, metal fabrication and want to be able to pick the shift that works for you, this job's for you! Basic experience required, training will be provided on 1st shift 7am until 3:30pm. This is an exciting opportunity. Great entry level engineering opportunity. Must be able to read basic blueprints.  This opportunity will allow you to work on cutting edge military and hospital equipment.    Great small team experience working with talented Engineers making products that matter! Apply today by sending your resume to Erie-Pa@spherion.com.  
        • Williston, Vermont
        • Permanent
        • $60,000 - $70,000 per year
        • 7:00 PM - 7:00 AM
        We're hiring for a Manager of Overnight Production in Williston, VT.This position is a career role, paying $60,000-$70,000 per year. The ideal candidate has previous supervisory experience in a production setting and previous experience working on the night shift.The role is Sunday-Tuesday and every other Saturday, 7pm-7am.Responsible for manufacturing functions. Lead manufacturing area to accomplish shift objectives as they pertain to safety, production volume and quality of the product, and to participate in developing these objectives. Provide leadership on the shop floor to ensure high productivity, morale and safety. Ensure that the departments are continuing long-term efforts in the improvement of safety, quality, on-time delivery, productivity, innovation, and associate morale.Apply today and call of text 802-864-5900!Responsibilities:SAFETY- Keep safety and quality at the forefront of all departmental decisions.- Initiate Accident Investigation process for any safety incident on shift.- Coordinate required safety training for all direct reports.SCHEDULING- Organize workflow based on daily schedule. - Schedule daily job assignments.- Identify bottleneck resources and capacity constraint resources.- Organize material movement to improve efficiency.- Working with Engineering and PSS, schedule needed machinery maintenance, as required.QUALITY/ PROBLEM SOLVING/ PROJECTS- Maintain compliance of process control procedures in accordance to ISO and Quality Management System (QMS) requirements.- Assist in the analysis resolution of process problems; coordinate problem-solving efforts.- Work with Continuous Improvement Team (CIT) regarding nonconforming products; create follow-up and close no-conformance reports/issues and ensure accuracy of all documentation and completed on time.- Assist in developing and implementing new processes and/or procedures.- Participate in improvement projects as a team leader, leader, or facilitator, as required.- Assist in evaluation of new and modified equipment for optimization and effectiveness.COMMUNICATION/TRAINING- Develop and maintain rapport with associates, management and peers.- Evaluate and communicate the daily information flow regarding of safety, quality, on-time delivery, productivity, and morale.- Communicate all company policies and procedures to associates.-? Make recommendations and assist in training of manufacturing associates.- Work with the other Production Team Leader and Human Resources to ensure that appropriate skills are being hired, appropriate training being conducted, and if necessary, proper progressive discipline followed; maintain compliance with company policies, rules and regulations.SUPERVISION- Responsible for manufacturing and associates-related administrative duties.- Supervises and coordinates activities of production workers.- Responsible for organizing all assigned resources and produce products according to the current schedule, and according to the approved quality standard; audit departments on a regular basis to insure that the teams are achieving acceptable standards of safety, work performance, housekeeping, quality, on-time delivery, and productivity; if needed, analyze and assist team in implementation of corrective action.Working hours: 7:00 PM - 7:00 AMSkills:--Good understanding of manufacturing processes, production and inventory control techniques, i.e. material planning, master scheduling, and shop floor control.--Knowledge and experience in a variety of LEAN Manufacturing techniques.--Strong organizational skills; project management an asset.--Possess strong technical, analytical and problem solving skills.--Strong communication/listening skills and interpersonal skills.--Ability to co
        We're hiring for a Manager of Overnight Production in Williston, VT.This position is a career role, paying $60,000-$70,000 per year. The ideal candidate has previous supervisory experience in a production setting and previous experience working on the night shift.The role is Sunday-Tuesday and every other Saturday, 7pm-7am.Responsible for manufacturing functions. Lead manufacturing area to accomplish shift objectives as they pertain to safety, production volume and quality of the product, and to participate in developing these objectives. Provide leadership on the shop floor to ensure high productivity, morale and safety. Ensure that the departments are continuing long-term efforts in the improvement of safety, quality, on-time delivery, productivity, innovation, and associate morale.Apply today and call of text 802-864-5900!Responsibilities:SAFETY- Keep safety and quality at the forefront of all departmental decisions.- Initiate Accident Investigation process for any safety incident on shift.- Coordinate required safety training for all direct reports.SCHEDULING- Organize workflow based on daily schedule. - Schedule daily job assignments.- Identify bottleneck resources and capacity constraint resources.- Organize material movement to improve efficiency.- Working with Engineering and PSS, schedule needed machinery maintenance, as required.QUALITY/ PROBLEM SOLVING/ PROJECTS- Maintain compliance of process control procedures in accordance to ISO and Quality Management System (QMS) requirements.- Assist in the analysis resolution of process problems; coordinate problem-solving efforts.- Work with Continuous Improvement Team (CIT) regarding nonconforming products; create follow-up and close no-conformance reports/issues and ensure accuracy of all documentation and completed on time.- Assist in developing and implementing new processes and/or procedures.- Participate in improvement projects as a team leader, leader, or facilitator, as required.- Assist in evaluation of new and modified equipment for optimization and effectiveness.COMMUNICATION/TRAINING- Develop and maintain rapport with associates, management and peers.- Evaluate and communicate the daily information flow regarding of safety, quality, on-time delivery, productivity, and morale.- Communicate all company policies and procedures to associates.-? Make recommendations and assist in training of manufacturing associates.- Work with the other Production Team Leader and Human Resources to ensure that appropriate skills are being hired, appropriate training being conducted, and if necessary, proper progressive discipline followed; maintain compliance with company policies, rules and regulations.SUPERVISION- Responsible for manufacturing and associates-related administrative duties.- Supervises and coordinates activities of production workers.- Responsible for organizing all assigned resources and produce products according to the current schedule, and according to the approved quality standard; audit departments on a regular basis to insure that the teams are achieving acceptable standards of safety, work performance, housekeeping, quality, on-time delivery, and productivity; if needed, analyze and assist team in implementation of corrective action.Working hours: 7:00 PM - 7:00 AMSkills:--Good understanding of manufacturing processes, production and inventory control techniques, i.e. material planning, master scheduling, and shop floor control.--Knowledge and experience in a variety of LEAN Manufacturing techniques.--Strong organizational skills; project management an asset.--Possess strong technical, analytical and problem solving skills.--Strong communication/listening skills and interpersonal skills.--Ability to co
        • Fairview, North Carolina
        • Permanent
        • $25.00 - $32.00 per hour
        • 8:00 AM - 5:00 PM
        Spherion is hiring an Electronic Test Technician for our manufacturing client in Fairview, NC. Ideal candidate will have 1 to 4 years of experience in a technician level role, specifically in electronics manufacturing.Responsibilities:Provide technical input on defining project priorities and company product goals.Perform testing in compliance with Good Laboratory Practice (GLP) as defined by the Code of Federal Regulations (CFR).Author protocols, reports, and test methodsAssume responsibility for interpreting data, organizing, executing, and coordinating project activities.Provide technical and strategic input on managing company intellectual property relevant to area of work.Working hours: 8:00 AM - 5:00 PMSkills:Fundamental / Basic Electrical, Electro-Mechanical ComprehensionMeasuring, Testing, & Reporting Skills for Test RegimentManual Dexterity / Small Components / Hand ToolsAbility to Read, Interpret, & Comprehend instructions and Designs (Internal & Customer Prints)Aptitude for LearningVerbal & Written Communication SkillsBasic computer skillsMicrosoft Applications: Excel and WordEducation:BachelorsExperience:1-4 yearsQualifications:Bachelor's degree in Engineering or Engineering Technology is preferred1 to 4 years of experience in a technician level role is preferred Apply online today or call us directly at 828-348-0390!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Spherion is hiring an Electronic Test Technician for our manufacturing client in Fairview, NC. Ideal candidate will have 1 to 4 years of experience in a technician level role, specifically in electronics manufacturing.Responsibilities:Provide technical input on defining project priorities and company product goals.Perform testing in compliance with Good Laboratory Practice (GLP) as defined by the Code of Federal Regulations (CFR).Author protocols, reports, and test methodsAssume responsibility for interpreting data, organizing, executing, and coordinating project activities.Provide technical and strategic input on managing company intellectual property relevant to area of work.Working hours: 8:00 AM - 5:00 PMSkills:Fundamental / Basic Electrical, Electro-Mechanical ComprehensionMeasuring, Testing, & Reporting Skills for Test RegimentManual Dexterity / Small Components / Hand ToolsAbility to Read, Interpret, & Comprehend instructions and Designs (Internal & Customer Prints)Aptitude for LearningVerbal & Written Communication SkillsBasic computer skillsMicrosoft Applications: Excel and WordEducation:BachelorsExperience:1-4 yearsQualifications:Bachelor's degree in Engineering or Engineering Technology is preferred1 to 4 years of experience in a technician level role is preferred Apply online today or call us directly at 828-348-0390!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Sioux Falls, South Dakota
        • Permanent
        • $65,000 - $75,000 per year
        • 8:00 AM - 5:00 PM
        Spherion Staffing is searching for a Software Engineer with 3-5 years' experience and moderate understanding of OOP languages. The Engineer will be part of an agile development team building enterprise grade software systems and is responsible for the design, development, testing and support of the company's internal systems or supporting APIs. To be successful in this role the engineer must be a customer-focused programmer with strong critical thinking skills.Salary: $65-$75k/year DOEMonday-Friday 8 am-5 pm with occasional evening and weekend workResponsibilities:- Responsible for the design, implementation, and maintenance's of secure, well-structured software within the guidance of Senior Engineers and established infrastructure and architectural patterns- Development of the underwriting or loan management systems or their supporting APIs- Development of the third party portal systems or their supporting APIs- Meeting or exceeding estimated or business-determined deadlines- Approximating task effort and communicating the status thereof- Effectively communicating with leadership, designers, product managers, and project managers with questions or concernsResponsibilities:See aboveWorking hours: 8:00 AM - 5:00 PMSkills:Requirements:-3 to 5 years equivalent work experience in software development-Associates degree in Computer Science or Information Systems preferred-Moderate understanding of OOP languages required (PHP/Python stacks a plus)-Ability to work in a team-Eye for detail and identifying risk-Experience implementing SDLC and cloud infrastructures a plus-Strong communication skillsEducation:AssociateExperience:4-7 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply or if you have questions you can reach out to Troy Thoms at 605-610-3204Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Spherion Staffing is searching for a Software Engineer with 3-5 years' experience and moderate understanding of OOP languages. The Engineer will be part of an agile development team building enterprise grade software systems and is responsible for the design, development, testing and support of the company's internal systems or supporting APIs. To be successful in this role the engineer must be a customer-focused programmer with strong critical thinking skills.Salary: $65-$75k/year DOEMonday-Friday 8 am-5 pm with occasional evening and weekend workResponsibilities:- Responsible for the design, implementation, and maintenance's of secure, well-structured software within the guidance of Senior Engineers and established infrastructure and architectural patterns- Development of the underwriting or loan management systems or their supporting APIs- Development of the third party portal systems or their supporting APIs- Meeting or exceeding estimated or business-determined deadlines- Approximating task effort and communicating the status thereof- Effectively communicating with leadership, designers, product managers, and project managers with questions or concernsResponsibilities:See aboveWorking hours: 8:00 AM - 5:00 PMSkills:Requirements:-3 to 5 years equivalent work experience in software development-Associates degree in Computer Science or Information Systems preferred-Moderate understanding of OOP languages required (PHP/Python stacks a plus)-Ability to work in a team-Eye for detail and identifying risk-Experience implementing SDLC and cloud infrastructures a plus-Strong communication skillsEducation:AssociateExperience:4-7 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply or if you have questions you can reach out to Troy Thoms at 605-610-3204Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Saint Peter, Minnesota
        • Permanent
        • $19.75 - $33.00 per hour
        • 5:00 PM - 3:30 AM
        DIRECT HIRE- Spherion, in Partnership with ALUMACRAFT is looking for experienced MIG/TIG welders working with aluminium. We have an amazing opportunity to build and expand on your welding experience! Our client is adding a new product line to their manufacturing facility and they are in need of skilled welders for both temp-to-hire and direct hire opportunities! These positions offer 1st shift hours; Mon-Thursday from 5 p.m. - 3:30 a.m. + OT as needed.Pay rates are dependent upon experience and skillset and there is opportunity for substantial increases based on performance, growth and attendance during your first year of employment -- not only that, their benefits are amazing! What a great opportunity!Responsibilities:- Operate safety equipment and use safe work habits.- Weld components in flat, vertical, or overhead positions.- Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.- Detect faulty operation of equipment or defective materials and notify supervisors.- Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material- Examine product for defects and measure to ensure conformance with specifications.- Recognize, set up, and operate hand and power tools common to the welding trade- Lay out, position, align, and secure parts and assemblies prior to assembly- Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, etc- Analyze engineering drawings, blueprints, specifications, sketches, work orders, etc.- Fill holes, and increase the size of metal parts.Working hours: 5:00 PM - 3:30 AMSkills:Ability to read and interpret work instructions and printsMeasuring and reading tolerancesEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma6+ months of MIG & TIG welding experienceAluminum welding experience required. DON'T WAIT, APPLY TODAY! Call Jennifer to set up an interview at 507-432-2430!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        DIRECT HIRE- Spherion, in Partnership with ALUMACRAFT is looking for experienced MIG/TIG welders working with aluminium. We have an amazing opportunity to build and expand on your welding experience! Our client is adding a new product line to their manufacturing facility and they are in need of skilled welders for both temp-to-hire and direct hire opportunities! These positions offer 1st shift hours; Mon-Thursday from 5 p.m. - 3:30 a.m. + OT as needed.Pay rates are dependent upon experience and skillset and there is opportunity for substantial increases based on performance, growth and attendance during your first year of employment -- not only that, their benefits are amazing! What a great opportunity!Responsibilities:- Operate safety equipment and use safe work habits.- Weld components in flat, vertical, or overhead positions.- Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.- Detect faulty operation of equipment or defective materials and notify supervisors.- Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material- Examine product for defects and measure to ensure conformance with specifications.- Recognize, set up, and operate hand and power tools common to the welding trade- Lay out, position, align, and secure parts and assemblies prior to assembly- Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, etc- Analyze engineering drawings, blueprints, specifications, sketches, work orders, etc.- Fill holes, and increase the size of metal parts.Working hours: 5:00 PM - 3:30 AMSkills:Ability to read and interpret work instructions and printsMeasuring and reading tolerancesEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma6+ months of MIG & TIG welding experienceAluminum welding experience required. DON'T WAIT, APPLY TODAY! Call Jennifer to set up an interview at 507-432-2430!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Frederick, Maryland
        • Temp to Perm
        • $15.00 - $17.00 per hour
        • Various Shifts Available
        Reads and interprets blue prints and engineering sketches. Inspects products manufactured at SATS and by suppliers and subcontractors toensure compliance with contract specifications. Examines product drawings to secure such information as dimensions andconfiguration of components to adequately inspect the product for design andcontract conformance. Reviews Bills of Material and other documentation to ensure proper componentsare installed into SATS product. Keeps abreast of engineering change notices and related documentation, whichaffects the manufacturing process. Conducts In-process and final inspection of SATS products at establishedinspection points in the manufacturing process. Reviews manufacturing schedules in order to prioritize daily work and supportproduction efforts. Initiates corrective action through the use of In Process Rejection Reports andNon-Conforming Material Reports. Conducts receiving inspections on all returning units, Customer Supplied Product,and as required on vendor supplied product. Controls and maintains inspection equipment to ensure proper use and calibration. Completes and organizes quality assurance records and other documentation toensure an accurate record of the manufacturing and inspection process ismaintained. Reviews initial release of job folders to ensure SATS documentation matchescustomer requirements. Interfaces with appropriate departments to resolve documentation/hardwareconcerns. Gathers data and graph charts for trend analysis. Orientates new employees on Quality responsibilities/requiremeResponsibilities:.Working hours: Various Shifts AvailableSkills:.Education:High SchoolExperience:1-4 yearsQualifications:. .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Reads and interprets blue prints and engineering sketches. Inspects products manufactured at SATS and by suppliers and subcontractors toensure compliance with contract specifications. Examines product drawings to secure such information as dimensions andconfiguration of components to adequately inspect the product for design andcontract conformance. Reviews Bills of Material and other documentation to ensure proper componentsare installed into SATS product. Keeps abreast of engineering change notices and related documentation, whichaffects the manufacturing process. Conducts In-process and final inspection of SATS products at establishedinspection points in the manufacturing process. Reviews manufacturing schedules in order to prioritize daily work and supportproduction efforts. Initiates corrective action through the use of In Process Rejection Reports andNon-Conforming Material Reports. Conducts receiving inspections on all returning units, Customer Supplied Product,and as required on vendor supplied product. Controls and maintains inspection equipment to ensure proper use and calibration. Completes and organizes quality assurance records and other documentation toensure an accurate record of the manufacturing and inspection process ismaintained. Reviews initial release of job folders to ensure SATS documentation matchescustomer requirements. Interfaces with appropriate departments to resolve documentation/hardwareconcerns. Gathers data and graph charts for trend analysis. Orientates new employees on Quality responsibilities/requiremeResponsibilities:.Working hours: Various Shifts AvailableSkills:.Education:High SchoolExperience:1-4 yearsQualifications:. .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Owatonna, Minnesota
        • Temporary
        • $29.00 - $31.00 per hour
        • 8:00 AM - 4:30 PM
        As a Packaging Engineer, you will design and specify packaging materials to promote, organize, and protect Special Service tools per the customer standards, in a timely, through and concise manner. You will also provide the customer (internal and external) with service products (documentation, prototypes, etc.) that exceed customer's expectations.Responsibilities:1. Communicate and coordinate projects with external suppliers and purchasing to ensure projects meet design and deadline requirements.2. Document and communicate assembly instructions and materials for the manufacturing environment.3. Consistently create methods of cost reductions of packaging materials.4. Perform packaging testing ASTM, TAPPI and ISTA when necessary to assure form, fit and function in our distribution environments.5. Represent the Packaging Engineering Team with professionalism and integrity when communicating with the customer, cross functional teams and the entire organization.Working hours: 8:00 AM - 4:30 PMSkills:1. Must have demonstrated PC skills (Excel, Microsoft office, and Cad).2. Proven ability to work in cross-functional team environment.3. Good oral and written communication skills and solid documentation skills.4. Project management skills with multiple project experience preferred-Microsoft Project (+).5. Ability to work with challenging individuals and customers.6. Creative problem solving-proven problem solving ability via design or process.7. Demonstrated ability to make commitments and product results.Education:BachelorsExperience:1-4 yearsQualifications:1. Minimum BS Packaging Engineering2. Demonstrated design skills and creative abilities utilizing CAD 3D solid modeling and supplier methods (Solid Works preferred).3. Thorough knowledge of packaging manufacturing processes and materials, with experience at designs including but not limited to corrugate, plastics, wood and cushioning materials.4. Knowledge of multiple distribution environments, i.e.: truck, air, export.5. Experience with bills of materials, ECO/ECR, ASTM, TAPPI standards, ISTA andHazmat (+). This position is available immediately.Please contact us at 507-451-3400 with any questions.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        As a Packaging Engineer, you will design and specify packaging materials to promote, organize, and protect Special Service tools per the customer standards, in a timely, through and concise manner. You will also provide the customer (internal and external) with service products (documentation, prototypes, etc.) that exceed customer's expectations.Responsibilities:1. Communicate and coordinate projects with external suppliers and purchasing to ensure projects meet design and deadline requirements.2. Document and communicate assembly instructions and materials for the manufacturing environment.3. Consistently create methods of cost reductions of packaging materials.4. Perform packaging testing ASTM, TAPPI and ISTA when necessary to assure form, fit and function in our distribution environments.5. Represent the Packaging Engineering Team with professionalism and integrity when communicating with the customer, cross functional teams and the entire organization.Working hours: 8:00 AM - 4:30 PMSkills:1. Must have demonstrated PC skills (Excel, Microsoft office, and Cad).2. Proven ability to work in cross-functional team environment.3. Good oral and written communication skills and solid documentation skills.4. Project management skills with multiple project experience preferred-Microsoft Project (+).5. Ability to work with challenging individuals and customers.6. Creative problem solving-proven problem solving ability via design or process.7. Demonstrated ability to make commitments and product results.Education:BachelorsExperience:1-4 yearsQualifications:1. Minimum BS Packaging Engineering2. Demonstrated design skills and creative abilities utilizing CAD 3D solid modeling and supplier methods (Solid Works preferred).3. Thorough knowledge of packaging manufacturing processes and materials, with experience at designs including but not limited to corrugate, plastics, wood and cushioning materials.4. Knowledge of multiple distribution environments, i.e.: truck, air, export.5. Experience with bills of materials, ECO/ECR, ASTM, TAPPI standards, ISTA andHazmat (+). This position is available immediately.Please contact us at 507-451-3400 with any questions.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Beaverton, Michigan
        • Temporary
        • $65,000 - $70,000 per year
        • 8:00 AM - 5:00 PM
        A Beaverton manufacturer is seeking an experienced Manufacturing Industrial Engineer to join their team for a temporary project! The project will last approximately 5-6 months and salary is $65,000 - 75,000/year depending on experience. Ideal candidates should possess engineering experience, preferably relating to silicone and/ or medical device manufacturing as well as cleanroom requirements. The last employee for this position was hired on with the company (long-term), so this needs to be back-filled for the temporary project.Responsibilities:Managing process changes including change control documentation, operator training and implementation on the manufacturing floorTroubleshooting process issuesCoordinating implementation of new product launchesIdentifying and implementing opportunities for process improvementsWill need to multitask to manage multiple projectsAbility to work with little supervisionWorking hours: 8:00 AM - 5:00 PMSkills:Excellent organizational, interpersonal, communication skills and attention to detail.Education:BachelorsExperience:1-4 yearsQualifications:BS in Engineering preferredExperience with Medical Device Molding, Assembly and Packaging highly preferredExperience with silicone molding desirableExperience working in a cleanroom environment desirableMust comply with Spherion's Drug Free Workplace Policy and disclose relevant criminal history at the time of hire Are you looking for an Engineering project in the medical device manufacturing field? Look no further! Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        A Beaverton manufacturer is seeking an experienced Manufacturing Industrial Engineer to join their team for a temporary project! The project will last approximately 5-6 months and salary is $65,000 - 75,000/year depending on experience. Ideal candidates should possess engineering experience, preferably relating to silicone and/ or medical device manufacturing as well as cleanroom requirements. The last employee for this position was hired on with the company (long-term), so this needs to be back-filled for the temporary project.Responsibilities:Managing process changes including change control documentation, operator training and implementation on the manufacturing floorTroubleshooting process issuesCoordinating implementation of new product launchesIdentifying and implementing opportunities for process improvementsWill need to multitask to manage multiple projectsAbility to work with little supervisionWorking hours: 8:00 AM - 5:00 PMSkills:Excellent organizational, interpersonal, communication skills and attention to detail.Education:BachelorsExperience:1-4 yearsQualifications:BS in Engineering preferredExperience with Medical Device Molding, Assembly and Packaging highly preferredExperience with silicone molding desirableExperience working in a cleanroom environment desirableMust comply with Spherion's Drug Free Workplace Policy and disclose relevant criminal history at the time of hire Are you looking for an Engineering project in the medical device manufacturing field? Look no further! Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Wilkes Barre, Pennsylvania
        • Temp to Perm
        • $16.50 per hour
        • 3:00 PM - 11:30 PM
        2nd Shift, Monday to Friday. Assembles products and operates equipment safety, productively, and ergonomically correct while manufacturing quality parts and assemblies.Responsibilities:Daily Tasks Level 3:To be completed with instruction from a supervisor or authorized trainer.Assembles, packages and labels products.Operates equipment and tools as required.Maintains assembly jigs, hand tools and equipment in good working order.Has basic product knowledge. Know which types of wheels belong on specific products being assembled, model numbers, bearings, nuts, bolts, etc.Continuously produces at an acceptable level of productivity with some supervision. (70%)Performs other duties as assigned.Daily Tasks Level 2: In addition to above tasks.Arranges own assembly area for the efficient assembly of all products.Notifies Production Supervisor of tools in need of repair, low inventory of items used daily and poor quality of product being assembled.Produces quality finished goods with acceptable workmanship and few rejects.Maintains moderate product knowledge. Know which types of wheels belong on specific products being assembled, model numbers, bearings, nuts, bolts, etc.Consistently produces at an acceptable level of productivity with some supervision. (80%)Daily Tasks Level 1: In addition to above tasks.Verifies and refers to Bill of Materials (BOM).Prints blueprints from engineering folders.Verifies and refers to Bill of Materials (BOM).Guides small groups of associates on special tasks.Substitutes as Lead when needed.Troubleshoots problems (Products, components, tools and overall quality of products being assembled.)Produces high quality finished goods with acceptable quality and minimal rejects.Has strong product knowledge. Knows what types of wheels belong on specific products being assembled, model numbers, bearings, nuts, bolts, etc.Consistently produces at an acceptable level of productivity with very little supervision. (90%)Working hours: 3:00 PM - 11:30 PMSkills:Essential for job function requires the ability to (with or without reasonable accommodations):Balances, stoops, kneels, crouches, and reaches to work overhead.Walks or stands for a minimum of 8 hours with limited breaks.Pushes and pulls materials, fingers and grasps parts and components.Exerts up to 40 pounds of force frequently.Pays close visual acuity to perform inspections and operate machines.Tolerates extremes in weather and machine temperature.Tolerates loud noise.Extensive use with power/hand tools.Education:No Degree RequiredExperience:0-1 yearsQualifications:Previous manufacturing assembly experience preferred. Apply online TODAY at spherion.com. Once you submit your application and your resume/job history, text "Assemble" to 570.283.0433Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        2nd Shift, Monday to Friday. Assembles products and operates equipment safety, productively, and ergonomically correct while manufacturing quality parts and assemblies.Responsibilities:Daily Tasks Level 3:To be completed with instruction from a supervisor or authorized trainer.Assembles, packages and labels products.Operates equipment and tools as required.Maintains assembly jigs, hand tools and equipment in good working order.Has basic product knowledge. Know which types of wheels belong on specific products being assembled, model numbers, bearings, nuts, bolts, etc.Continuously produces at an acceptable level of productivity with some supervision. (70%)Performs other duties as assigned.Daily Tasks Level 2: In addition to above tasks.Arranges own assembly area for the efficient assembly of all products.Notifies Production Supervisor of tools in need of repair, low inventory of items used daily and poor quality of product being assembled.Produces quality finished goods with acceptable workmanship and few rejects.Maintains moderate product knowledge. Know which types of wheels belong on specific products being assembled, model numbers, bearings, nuts, bolts, etc.Consistently produces at an acceptable level of productivity with some supervision. (80%)Daily Tasks Level 1: In addition to above tasks.Verifies and refers to Bill of Materials (BOM).Prints blueprints from engineering folders.Verifies and refers to Bill of Materials (BOM).Guides small groups of associates on special tasks.Substitutes as Lead when needed.Troubleshoots problems (Products, components, tools and overall quality of products being assembled.)Produces high quality finished goods with acceptable quality and minimal rejects.Has strong product knowledge. Knows what types of wheels belong on specific products being assembled, model numbers, bearings, nuts, bolts, etc.Consistently produces at an acceptable level of productivity with very little supervision. (90%)Working hours: 3:00 PM - 11:30 PMSkills:Essential for job function requires the ability to (with or without reasonable accommodations):Balances, stoops, kneels, crouches, and reaches to work overhead.Walks or stands for a minimum of 8 hours with limited breaks.Pushes and pulls materials, fingers and grasps parts and components.Exerts up to 40 pounds of force frequently.Pays close visual acuity to perform inspections and operate machines.Tolerates extremes in weather and machine temperature.Tolerates loud noise.Extensive use with power/hand tools.Education:No Degree RequiredExperience:0-1 yearsQualifications:Previous manufacturing assembly experience preferred. Apply online TODAY at spherion.com. Once you submit your application and your resume/job history, text "Assemble" to 570.283.0433Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • West Springfield, Massachusetts
        • Permanent
        • $90,000 - $120,000 per year
        • 8:00 AM - 5:00 PM
        Sr. Hardware Engineer job summary: Are you hands-on and like to get things done? Do you like the culture of a start up with the stability of a market leader? How about a place where you can make things happen quickly and move your ideas from paper to market in six months to a year? Do you like wearing jeans and having great team members who hangout together in an almost family like fashion? How about a generous benefits plan the is the envy of many? If there is nothing more rewarding than seeing your ideas go from design to production and into a customers hands you should consider our company and continue reading: This position is located at the Corporate Headquarters in Western Massachusetts. You will be located in the Engineering Department with activities such as Project Tasks Coordination and tracking and Board Design Support.Responsibilities:Sr. Hardware Engineer responsibilities:Provides direct support to the Hardware Engineering Manager.Collaborates on board design tasks based on the level of expertise and background.Participates in and helps improve project release mechanism.Works closely with other departments (software, production, etc.) to support on going design tasks and projects; coordinates efforts as needed to achieve project deadlines.Collaborates with documentation team to provide technical information and participate during review cycles.Assists with customer support as needed.Maintains an ongoing list of tasks being debugged at engineering lab and will interact with Test Engineers as needed.Sr. Hardware Engineer Skills:Working hours: 8:00 AM - 5:00 PMSkills:Sr. Hardware Engineer Skills:Must be able to read schematics and understand PCB layout diagramsStrong understanding of analog, RF, and digital circuit design and theories at the component level.Must have a solid understanding of electronic circuits and overall interface protocols as a overall background for board level understanding.Ability to multi-task while maintaining organization and tracking deadlines.Experience in board/hardware design is a plus.Experience with hardware troubleshooting at the component level is a plus.Ability to handle job stress and interact effectively with others in the workplaceFluent domain of the English language: Ability to read, write and speak English wellAbility to carry out detailed written and oral instructionsEducation:BachelorsExperience:1-4 yearsQualifications:Sr. Hardware Engineer qualifications:Bachelor's degree in Electrical Engineering 5+ years experience, Master's degree preferred with 3+ years experience.3+ years of experience in digital systems and/or handling projects in the digital hardware domain.Experience with 32-bit micro controllersC code programming experienceHardware board layout design experienceDesirable - knowledge/experience of (OOP), Altium, CAN, USB, I2C, SPI, UART interfaces. Please Call 413-273-8557 or if busy or not available call/text 413-781-4120. Upload your resume to our website: https://www.spherion.com/apply/75058 Please ask for BrianSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Sr. Hardware Engineer job summary: Are you hands-on and like to get things done? Do you like the culture of a start up with the stability of a market leader? How about a place where you can make things happen quickly and move your ideas from paper to market in six months to a year? Do you like wearing jeans and having great team members who hangout together in an almost family like fashion? How about a generous benefits plan the is the envy of many? If there is nothing more rewarding than seeing your ideas go from design to production and into a customers hands you should consider our company and continue reading: This position is located at the Corporate Headquarters in Western Massachusetts. You will be located in the Engineering Department with activities such as Project Tasks Coordination and tracking and Board Design Support.Responsibilities:Sr. Hardware Engineer responsibilities:Provides direct support to the Hardware Engineering Manager.Collaborates on board design tasks based on the level of expertise and background.Participates in and helps improve project release mechanism.Works closely with other departments (software, production, etc.) to support on going design tasks and projects; coordinates efforts as needed to achieve project deadlines.Collaborates with documentation team to provide technical information and participate during review cycles.Assists with customer support as needed.Maintains an ongoing list of tasks being debugged at engineering lab and will interact with Test Engineers as needed.Sr. Hardware Engineer Skills:Working hours: 8:00 AM - 5:00 PMSkills:Sr. Hardware Engineer Skills:Must be able to read schematics and understand PCB layout diagramsStrong understanding of analog, RF, and digital circuit design and theories at the component level.Must have a solid understanding of electronic circuits and overall interface protocols as a overall background for board level understanding.Ability to multi-task while maintaining organization and tracking deadlines.Experience in board/hardware design is a plus.Experience with hardware troubleshooting at the component level is a plus.Ability to handle job stress and interact effectively with others in the workplaceFluent domain of the English language: Ability to read, write and speak English wellAbility to carry out detailed written and oral instructionsEducation:BachelorsExperience:1-4 yearsQualifications:Sr. Hardware Engineer qualifications:Bachelor's degree in Electrical Engineering 5+ years experience, Master's degree preferred with 3+ years experience.3+ years of experience in digital systems and/or handling projects in the digital hardware domain.Experience with 32-bit micro controllersC code programming experienceHardware board layout design experienceDesirable - knowledge/experience of (OOP), Altium, CAN, USB, I2C, SPI, UART interfaces. Please Call 413-273-8557 or if busy or not available call/text 413-781-4120. Upload your resume to our website: https://www.spherion.com/apply/75058 Please ask for BrianSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Lakeland, Florida
        • Permanent
        • $40,000 - $50,000 per year
        • 1:00 PM - 11:00 PM
        Spherion has partnered with a fast paced healthcare laundry facility seeking an experienced Day Shift Production Supervisor to join their team. The primary purpose of the Production Supervisor is to ensure effective, safe and cost efficient operations and effective staff management for various departments within the plant. The Production Supervisor will need to be flexible to be at the plant whenever needed, and will move from area to area frequently during the shift. This is an immediate direct hire opportunity!Responsibilities:- Lead staff to meet daily/weekly production goals through efficient production processes: - Ensure that adequate staffing exists through effective scheduling. - Effectively manage labor costs as directed, - Ensure that all employees are adequately trained. - Exhibit sound leadership in concert with Vtoen culture: Listen to all employees - encourage two-way communication -Serve as a role model for respect for the company's policies and procedures - Fill in and assist with any position as needed to ensure that production goals are met. This includes tie-out, production positions, etc. - Work in constant collaboration with Engineering to maintain equipment. - Work in collaboration with the service department to consistently meet their needs through complete tie-outs and timely response to urgent service requests. - Uphold a genuine regard for safety by ensuring that safety committee meetings are held monthly on relevant topics. - React immediately to perceived safety violations or issues, contacting the Safety Director immediately. - Participate willingly in the quarterly safety audit. 7. Track and communicate necessary information to employees regarding production targets, achievements, etc. - Communicate visibly via a Production Board - Hold periodic department meetings to discuss accomplishments. - Responsible for product quality: - Implement a quality assurance system internally - Ensure that formulas and processes are documented, taught and followed. - Handle administrative duties as needed: - Generate reports as needed in a timely manner - Work with office staff to ensure that new hire paperwork and other reporting is handled efficiently and accurately. -Any other duties as assigned or deemed necessary.Working hours: 1:00 PM - 11:00 PMSkills:- The ability to perform the essential functions of the job, with or without an accommodation. - Solid leadership acumen - Excellent organizational skills has succeeded at a job that required attention to detail, flourishing in a fast pace and measuring/communicating results - Exceptional internal collaboration skills - Solid computer skillsEducation:High SchoolExperience:1-4 yearsQualifications:3+ years supervisory experience in a related production environmentMust be flexible with hours and have weekend availabilityHS Diploma Please apply with a current resume to stacymadden@spherion.com for immediate considerationSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Spherion has partnered with a fast paced healthcare laundry facility seeking an experienced Day Shift Production Supervisor to join their team. The primary purpose of the Production Supervisor is to ensure effective, safe and cost efficient operations and effective staff management for various departments within the plant. The Production Supervisor will need to be flexible to be at the plant whenever needed, and will move from area to area frequently during the shift. This is an immediate direct hire opportunity!Responsibilities:- Lead staff to meet daily/weekly production goals through efficient production processes: - Ensure that adequate staffing exists through effective scheduling. - Effectively manage labor costs as directed, - Ensure that all employees are adequately trained. - Exhibit sound leadership in concert with Vtoen culture: Listen to all employees - encourage two-way communication -Serve as a role model for respect for the company's policies and procedures - Fill in and assist with any position as needed to ensure that production goals are met. This includes tie-out, production positions, etc. - Work in constant collaboration with Engineering to maintain equipment. - Work in collaboration with the service department to consistently meet their needs through complete tie-outs and timely response to urgent service requests. - Uphold a genuine regard for safety by ensuring that safety committee meetings are held monthly on relevant topics. - React immediately to perceived safety violations or issues, contacting the Safety Director immediately. - Participate willingly in the quarterly safety audit. 7. Track and communicate necessary information to employees regarding production targets, achievements, etc. - Communicate visibly via a Production Board - Hold periodic department meetings to discuss accomplishments. - Responsible for product quality: - Implement a quality assurance system internally - Ensure that formulas and processes are documented, taught and followed. - Handle administrative duties as needed: - Generate reports as needed in a timely manner - Work with office staff to ensure that new hire paperwork and other reporting is handled efficiently and accurately. -Any other duties as assigned or deemed necessary.Working hours: 1:00 PM - 11:00 PMSkills:- The ability to perform the essential functions of the job, with or without an accommodation. - Solid leadership acumen - Excellent organizational skills has succeeded at a job that required attention to detail, flourishing in a fast pace and measuring/communicating results - Exceptional internal collaboration skills - Solid computer skillsEducation:High SchoolExperience:1-4 yearsQualifications:3+ years supervisory experience in a related production environmentMust be flexible with hours and have weekend availabilityHS Diploma Please apply with a current resume to stacymadden@spherion.com for immediate considerationSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Lakeland, Florida
        • Permanent
        • $40,000 - $50,000 per year
        • 6:30 AM - 4:30 PM
        Spherion has partnered with a fast paced healthcare laundry facility seeking an experienced Day Shift Production Supervisor to join their team. The primary purpose of the Production Supervisor is to ensure effective, safe and cost efficient operations and effective staff management for various departments within the plant. The Production Supervisor will need to be flexible to be at the plant whenever needed, and will move from area to area frequently during the shift. This is an immediate direct hire opportunity!Responsibilities:- Lead staff to meet daily/weekly production goals through efficient production processes: - Ensure that adequate staffing exists through effective scheduling. - Effectively manage labor costs as directed, - Ensure that all employees are adequately trained. - Exhibit sound leadership in concert with Vtoen culture: Listen to all employees - encourage two-way communication -Serve as a role model for respect for the company's policies and procedures - Fill in and assist with any position as needed to ensure that production goals are met. This includes tie-out, production positions, etc. - Work in constant collaboration with Engineering to maintain equipment. - Work in collaboration with the service department to consistently meet their needs through complete tie-outs and timely response to urgent service requests. - Uphold a genuine regard for safety by ensuring that safety committee meetings are held monthly on relevant topics. - React immediately to perceived safety violations or issues, contacting the Safety Director immediately. - Participate willingly in the quarterly safety audit. 7. Track and communicate necessary information to employees regarding production targets, achievements, etc. - Communicate visibly via a Production Board - Hold periodic department meetings to discuss accomplishments. - Responsible for product quality: - Implement a quality assurance system internally - Ensure that formulas and processes are documented, taught and followed. - Handle administrative duties as needed: - Generate reports as needed in a timely manner - Work with office staff to ensure that new hire paperwork and other reporting is handled efficiently and accurately. -Any other duties as assigned or deemed necessary.Working hours: 6:30 AM - 4:30 PMSkills:- The ability to perform the essential functions of the job, with or without an accommodation. - Solid leadership acumen - Excellent organizational skills has succeeded at a job that required attention to detail, flourishing in a fast pace and measuring/communicating results - Exceptional internal collaboration skills - Solid computer skillsEducation:High SchoolExperience:1-4 yearsQualifications:3+ years supervisory experience in a related production environmentMust be flexible with hours and have weekend availabilityHS Diploma Please apply with a current resume to stacymadden@spherion.com for immediate considerationSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Spherion has partnered with a fast paced healthcare laundry facility seeking an experienced Day Shift Production Supervisor to join their team. The primary purpose of the Production Supervisor is to ensure effective, safe and cost efficient operations and effective staff management for various departments within the plant. The Production Supervisor will need to be flexible to be at the plant whenever needed, and will move from area to area frequently during the shift. This is an immediate direct hire opportunity!Responsibilities:- Lead staff to meet daily/weekly production goals through efficient production processes: - Ensure that adequate staffing exists through effective scheduling. - Effectively manage labor costs as directed, - Ensure that all employees are adequately trained. - Exhibit sound leadership in concert with Vtoen culture: Listen to all employees - encourage two-way communication -Serve as a role model for respect for the company's policies and procedures - Fill in and assist with any position as needed to ensure that production goals are met. This includes tie-out, production positions, etc. - Work in constant collaboration with Engineering to maintain equipment. - Work in collaboration with the service department to consistently meet their needs through complete tie-outs and timely response to urgent service requests. - Uphold a genuine regard for safety by ensuring that safety committee meetings are held monthly on relevant topics. - React immediately to perceived safety violations or issues, contacting the Safety Director immediately. - Participate willingly in the quarterly safety audit. 7. Track and communicate necessary information to employees regarding production targets, achievements, etc. - Communicate visibly via a Production Board - Hold periodic department meetings to discuss accomplishments. - Responsible for product quality: - Implement a quality assurance system internally - Ensure that formulas and processes are documented, taught and followed. - Handle administrative duties as needed: - Generate reports as needed in a timely manner - Work with office staff to ensure that new hire paperwork and other reporting is handled efficiently and accurately. -Any other duties as assigned or deemed necessary.Working hours: 6:30 AM - 4:30 PMSkills:- The ability to perform the essential functions of the job, with or without an accommodation. - Solid leadership acumen - Excellent organizational skills has succeeded at a job that required attention to detail, flourishing in a fast pace and measuring/communicating results - Exceptional internal collaboration skills - Solid computer skillsEducation:High SchoolExperience:1-4 yearsQualifications:3+ years supervisory experience in a related production environmentMust be flexible with hours and have weekend availabilityHS Diploma Please apply with a current resume to stacymadden@spherion.com for immediate considerationSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Durham, North Carolina
        • Temp to Perm
        • $22.00 per hour
        • 8:00 AM - 5:00 PM
        The account rep acts as the central poc for all business transactions within Dichtomatik. They contribute to the success of the company by fulfilling B2B sales orders, qualifying new client leads or opportunities and consistently maintaining and enhancing business relationships through exceptional account management. Innovative, driven and having a strong value for customers, continuously driviing success for both themselves as well as the organization are keys to success in this role.Responsibilities:- Promote company products to new and existing clients via product and service knowledge- Act as liaison by providing technical assistance to customers, involving basic application engineering when necessary or calling on other functions as needed to support effective execution- Take ownership of and work collaboratively with Territory Sales Reps as well as Regional Sales Managers to ensure client expectations are being met- Responsible for initiating and participating in team problem resolution to address part issues and work flow issues, driving these to improvement and implementation- Utilize the CRM and internal processes to adhere to business policies and facilitate the growth and success of the departmentWorking hours: 8:00 AM - 5:00 PMSkills:MS OfficwExcellent oral and written communicationAbility to excel in a fast-paced learning environmentEducation:BachelorsExperience:1-4 yearsQualifications:- BA/BS with a minimum of 3.2 GPA or five years Customer Service experience- 1-2 years in a distribution or manufacturing environment preferred Apply today then call our office and speak to KamSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        The account rep acts as the central poc for all business transactions within Dichtomatik. They contribute to the success of the company by fulfilling B2B sales orders, qualifying new client leads or opportunities and consistently maintaining and enhancing business relationships through exceptional account management. Innovative, driven and having a strong value for customers, continuously driviing success for both themselves as well as the organization are keys to success in this role.Responsibilities:- Promote company products to new and existing clients via product and service knowledge- Act as liaison by providing technical assistance to customers, involving basic application engineering when necessary or calling on other functions as needed to support effective execution- Take ownership of and work collaboratively with Territory Sales Reps as well as Regional Sales Managers to ensure client expectations are being met- Responsible for initiating and participating in team problem resolution to address part issues and work flow issues, driving these to improvement and implementation- Utilize the CRM and internal processes to adhere to business policies and facilitate the growth and success of the departmentWorking hours: 8:00 AM - 5:00 PMSkills:MS OfficwExcellent oral and written communicationAbility to excel in a fast-paced learning environmentEducation:BachelorsExperience:1-4 yearsQualifications:- BA/BS with a minimum of 3.2 GPA or five years Customer Service experience- 1-2 years in a distribution or manufacturing environment preferred Apply today then call our office and speak to KamSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Lakeland, Florida
        • Permanent
        • $20.00 per hour
        • 8:00 AM - 5:00 PM
        Spherion has partnered with a fast paced engineer services firm seeking an experienced AutoCAD Drafter/Designer to join their team. This is an immediate direct hire opportunity! Hourly compensation (DOE) | Opportunities available in Lakeland & Orlando!Responsibilities:This position offers the opportunity to provide computer aided drafting and design (CADD) skills to support a wide variety of projects in the residential and commercial site development. Create detailed engineering drawings for all areas of projects in conformance with the design criteria and project requirements from general written or verbal specifications from the project team, sketches, and/or other drawings. Provide engineering design support including, preliminary/conceptual plans, site layout, grading, drainage, utilities, and erosion control. Follow discipline-specific, company CAD standards, and government agencies standards. Produce drawings on schedule with quality and clarity. All other duties assigned by Engineering staff.Working hours: 8:00 AM - 5:00 PMSkills:-Proficient in the application of drafting principles of AutoCAD 2018 and Civil3D software.-Good communication and organization skills.-Familiarity with MicroStation, Sketchup, Revit a plus.Education:High SchoolExperience:1-4 yearsQualifications:-3+ years of design/drafting work experience.-Design experience of general civil-site, roadways, utilities, and land development.-Design alignments and profiles in AutoCAD Civil 3D.-Create and manage surfaces.-Proficient using AutoCAD functions including Sheet Set Manager and Xref manager, plan and profiles, pipe networks, feature lines, and grading tools.-Provide technical guidance and assistance to junior CADD personnel.-Perform work assignments in accordance with the project scope of work and with applicable CADD drafting standards.-Work well with others as a contributing member of a project design group.-May be assigned to monitor drafting production, and ensure growth of junior CADD personnel. Interested candidates please apply with a current resume to stacymadden@spherion.com for immediate consideration!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Spherion has partnered with a fast paced engineer services firm seeking an experienced AutoCAD Drafter/Designer to join their team. This is an immediate direct hire opportunity! Hourly compensation (DOE) | Opportunities available in Lakeland & Orlando!Responsibilities:This position offers the opportunity to provide computer aided drafting and design (CADD) skills to support a wide variety of projects in the residential and commercial site development. Create detailed engineering drawings for all areas of projects in conformance with the design criteria and project requirements from general written or verbal specifications from the project team, sketches, and/or other drawings. Provide engineering design support including, preliminary/conceptual plans, site layout, grading, drainage, utilities, and erosion control. Follow discipline-specific, company CAD standards, and government agencies standards. Produce drawings on schedule with quality and clarity. All other duties assigned by Engineering staff.Working hours: 8:00 AM - 5:00 PMSkills:-Proficient in the application of drafting principles of AutoCAD 2018 and Civil3D software.-Good communication and organization skills.-Familiarity with MicroStation, Sketchup, Revit a plus.Education:High SchoolExperience:1-4 yearsQualifications:-3+ years of design/drafting work experience.-Design experience of general civil-site, roadways, utilities, and land development.-Design alignments and profiles in AutoCAD Civil 3D.-Create and manage surfaces.-Proficient using AutoCAD functions including Sheet Set Manager and Xref manager, plan and profiles, pipe networks, feature lines, and grading tools.-Provide technical guidance and assistance to junior CADD personnel.-Perform work assignments in accordance with the project scope of work and with applicable CADD drafting standards.-Work well with others as a contributing member of a project design group.-May be assigned to monitor drafting production, and ensure growth of junior CADD personnel. Interested candidates please apply with a current resume to stacymadden@spherion.com for immediate consideration!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Nashville, North Carolina
        • Permanent
        • $60,000 - $80,000 per year
        • 9:00 AM - 5:00 PM
        POSITION SUMMARY**Experience in electronic or hi-tech manufacturing**Perform a complete range of tasks relating to project management for all customer service requirements. The Project Manager will serve as the main point of contact for customer activities relating to proposal initiation and submittal, contract review, ordering, scheduling and delivery.Responsibilities:ESSENTIAL DUTIES & RESPONSBILITIESTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Others duties may be assigned.- Ensure adherence to master plans and schedules, develop solutions to program problems and service as customer project liaison for internal staff- Responsible for overall customer satisfaction and program profitability- Ensure projects are completed on time and within budget- Collaborate with manufacturing, engineering, PCB layout design and quality departments for assigned programs- Collect and submit necessary data to initiate and enable completion of quotations for customer product- Perform final review and submittal of customer proposals- Schedule and lead kick-off meetings for new product introduction- Perform detailed contract review of purchase orders received from customers- Provide ongoing program monitoring and status reporting both internally and externally- Monitor excess, orphan, and obsolete material and disposition with customers- Provide ongoing sales support to organically grow customer accounts- Coordinate customer visits to facility and travel to customer sites as necessaryWorking hours: 9:00 AM - 5:00 PMSkills:REQUIRED/PREFERRED SKILLS- Prior experience performing contract review of purchase orders- Excellent verbal and written communication skills- Strong Microsoft Office skills (Word, Excel and Access)- Demonstrated ability to troubleshoot a variety of problems associated with managing customer projects- Knowledge of MRP production control system- Knowledge of electronics manufacturing processes- Prior experience with production scheduling and generating reporting to monitor schedulingEducation:BachelorsExperience:1-4 yearsQualifications:SPECIFIC EDUCATIONAL/EXPERIENCE REQUIREMENTSThe requirements listed below are representative of the knowledge, skill, and/or ability required. - Bachelor?s degree (B.A. or B.S.) from four-year college or university is preferred; Associate?s degree (A.A) or equivalent from two-year college or technical school is required- 3-5 years project management experience is required. Prior experience in an electronics manufacturing environment is preferred. Submit your resume today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        POSITION SUMMARY**Experience in electronic or hi-tech manufacturing**Perform a complete range of tasks relating to project management for all customer service requirements. The Project Manager will serve as the main point of contact for customer activities relating to proposal initiation and submittal, contract review, ordering, scheduling and delivery.Responsibilities:ESSENTIAL DUTIES & RESPONSBILITIESTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Others duties may be assigned.- Ensure adherence to master plans and schedules, develop solutions to program problems and service as customer project liaison for internal staff- Responsible for overall customer satisfaction and program profitability- Ensure projects are completed on time and within budget- Collaborate with manufacturing, engineering, PCB layout design and quality departments for assigned programs- Collect and submit necessary data to initiate and enable completion of quotations for customer product- Perform final review and submittal of customer proposals- Schedule and lead kick-off meetings for new product introduction- Perform detailed contract review of purchase orders received from customers- Provide ongoing program monitoring and status reporting both internally and externally- Monitor excess, orphan, and obsolete material and disposition with customers- Provide ongoing sales support to organically grow customer accounts- Coordinate customer visits to facility and travel to customer sites as necessaryWorking hours: 9:00 AM - 5:00 PMSkills:REQUIRED/PREFERRED SKILLS- Prior experience performing contract review of purchase orders- Excellent verbal and written communication skills- Strong Microsoft Office skills (Word, Excel and Access)- Demonstrated ability to troubleshoot a variety of problems associated with managing customer projects- Knowledge of MRP production control system- Knowledge of electronics manufacturing processes- Prior experience with production scheduling and generating reporting to monitor schedulingEducation:BachelorsExperience:1-4 yearsQualifications:SPECIFIC EDUCATIONAL/EXPERIENCE REQUIREMENTSThe requirements listed below are representative of the knowledge, skill, and/or ability required. - Bachelor?s degree (B.A. or B.S.) from four-year college or university is preferred; Associate?s degree (A.A) or equivalent from two-year college or technical school is required- 3-5 years project management experience is required. Prior experience in an electronics manufacturing environment is preferred. Submit your resume today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Covington, Louisiana
        • Permanent
        • $20.00 - $25.00 per hour
        • 8:00 AM - 5:00 PM
        Our Client, one of the fastest growing companies in the US, is seeking a Machinist to operate production machinery at their Covington facility. This is a direct hire opportunity! We look forward to hearing from you! - Questions? To speak with a member of our team directly feel free to call: 504-455-6565.- Resume submissions welcome! Please forward your resume to: spherionneworleans@spherion.comResponsibilities:- Use machine tools: lathes, milling machines, and grinders - Work with the production and engineering teams to produce precision metal partsWorking hours: 8:00 AM - 5:00 PMSkills:- Ability to read, interpret blueprints- Able to use CNC machinery - Able to use manual machineryEducation:BachelorsExperience:1-4 yearsQualifications:- 1-4 years using CNC and manual machinery in a production environment- The ability to read, interpret and apply blueprints in the production of pieces - Questions? To speak with a member of our team directly feel free to call: 504-455-6565.- Resume submissions welcome! Please forward your resume to: spherionneworleans@spherion.com- Let's get to work!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Our Client, one of the fastest growing companies in the US, is seeking a Machinist to operate production machinery at their Covington facility. This is a direct hire opportunity! We look forward to hearing from you! - Questions? To speak with a member of our team directly feel free to call: 504-455-6565.- Resume submissions welcome! Please forward your resume to: spherionneworleans@spherion.comResponsibilities:- Use machine tools: lathes, milling machines, and grinders - Work with the production and engineering teams to produce precision metal partsWorking hours: 8:00 AM - 5:00 PMSkills:- Ability to read, interpret blueprints- Able to use CNC machinery - Able to use manual machineryEducation:BachelorsExperience:1-4 yearsQualifications:- 1-4 years using CNC and manual machinery in a production environment- The ability to read, interpret and apply blueprints in the production of pieces - Questions? To speak with a member of our team directly feel free to call: 504-455-6565.- Resume submissions welcome! Please forward your resume to: spherionneworleans@spherion.com- Let's get to work!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        • Covington, Louisiana
        • Permanent
        • $50,000 - $65,000 per year
        • 8:00 AM - 5:00 PM
        Our client, one of the fastest growing privately held companies in the US, is seeking a Field Service Engineer. This is a direct hire opportunity! This individual will work closely with the engineering and fabrication teams to setup and test equipment. After the equipment is tested and proven, it is shipped to our customers' factories. The Field Service Engineer will be a part of the team responsible for installing, starting up, testing, debugging and servicing the equipment in the customer factory. - If you have any questions, or would like to discuss the role in further detail please feel free to reach out to Charles Thompson directly: 504-455-6565. - Direct resume submissions welcome! Please forward your resume to: charlesthompson@spherion.com.Responsibilities:- Build and wire control panels- Perform equipment setup, testing, installation, startup and commissioning- Provide customer support and service- Train and educate customers on the use, preventive maintenance, and safety regulations of equipment- Troubleshoot, diagnose and repair units while in the field - Perform preventive maintenance or service such as cleaning and adjusting equipment - Generate detailed service reportsWorking hours: 8:00 AM - 5:00 PMSkills:- Able to develop plans to remediate machinery malfunction- Able to assist engineering in determining the design resolution required to remedy the issues found and/or implement upgrade designs - Understanding of control systems- Quick learner - Strong troubleshooting skills.- Good with computers - Proficient in Microsoft Office software- Customer service orientedEducation:BachelorsExperience:1-4 yearsQualifications:- Willingness to travel up to 60% of the time - International and domestic travel required- 5 years of experience required - Bachelor's degree in Engineering required.- Understanding of industrial control system components (i.e. instrumentation, motor controls, pneumatics, hydraulics, etc.)-.Ability to read electrical diagrams. - If you have any questions, or would like to discuss the role in further detail please feel free to reach out to Charles Thompson directly: 504-455-6565. - Direct resume submissions welcome! Please forward your resume to: charlesthompson@spherion.com.- Let's get to work!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
        Our client, one of the fastest growing privately held companies in the US, is seeking a Field Service Engineer. This is a direct hire opportunity! This individual will work closely with the engineering and fabrication teams to setup and test equipment. After the equipment is tested and proven, it is shipped to our customers' factories. The Field Service Engineer will be a part of the team responsible for installing, starting up, testing, debugging and servicing the equipment in the customer factory. - If you have any questions, or would like to discuss the role in further detail please feel free to reach out to Charles Thompson directly: 504-455-6565. - Direct resume submissions welcome! Please forward your resume to: charlesthompson@spherion.com.Responsibilities:- Build and wire control panels- Perform equipment setup, testing, installation, startup and commissioning- Provide customer support and service- Train and educate customers on the use, preventive maintenance, and safety regulations of equipment- Troubleshoot, diagnose and repair units while in the field - Perform preventive maintenance or service such as cleaning and adjusting equipment - Generate detailed service reportsWorking hours: 8:00 AM - 5:00 PMSkills:- Able to develop plans to remediate machinery malfunction- Able to assist engineering in determining the design resolution required to remedy the issues found and/or implement upgrade designs - Understanding of control systems- Quick learner - Strong troubleshooting skills.- Good with computers - Proficient in Microsoft Office software- Customer service orientedEducation:BachelorsExperience:1-4 yearsQualifications:- Willingness to travel up to 60% of the time - International and domestic travel required- 5 years of experience required - Bachelor's degree in Engineering required.- Understanding of industrial control system components (i.e. instrumentation, motor controls, pneumatics, hydraulics, etc.)-.Ability to read electrical diagrams. - If you have any questions, or would like to discuss the role in further detail please feel free to reach out to Charles Thompson directly: 504-455-6565. - Direct resume submissions welcome! Please forward your resume to: charlesthompson@spherion.com.- Let's get to work!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      30 of 86 jobs seen

      Thank you for subscribing to your personalized job alerts.

      It looks like you want to switch your language. This will reset your filters on your current job search.