Thank you for subscribing to your personalized job alerts.

    16 jobs found for engineering

    Filter3
    Clear all
      • College Station, Texas
      • Permanent
      • $20.00 - $23.00 per hour
      • 8:00 AM - 5:00 PM
      We are looking for CMT/Lab Technician for a local company in the Bryan-College Station area. The job requires extended periods of time working outdoors with moderate to heavy (75lbs+) lifting.Periodic travel is required, and on-call duties may be needed. Field technicians must be available to work some weekends, holidays and overtime as needed.Responsibilities:Communicate and coordinate with dispatcher for daily assignmentsPerform field materials testing of soil, asphalt, masonry, and concretePerform soil, concrete, aggregate and asphalt sampling and testingObtain necessary lab technician certificationsPrepare detailed and accurate field reports on a daily basisReport to Project Managers, CMT Supervisors, contractors regarding construction issuesPeriodic travel is required, and on-call duties may be neededUpdate Supervisor and Dispatcher on progress and delays on every projectWorking hours: 8:00 AM - 5:00 PMSkills:Ability to read and interpret plans, specifications, safety rules, operating and maintenance instructions, and procedure manualsAccuracy, attention to detail and timeliness with project results requiredObtain necessary field technician certificationsValid Texas Driver's LicenseEducation:High SchoolExperience:1-4 yearsQualifications:3 years Construction and/or materials testing experienceFamiliarity with ASTM procedures for soil, asphalt and concrete testing preferredProcedural and process-oriented structure, due to strict regulatory requirementsHigh school diploma or GED equivalentWilling to travel with a flexible schedule Apply nowSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We are looking for CMT/Lab Technician for a local company in the Bryan-College Station area. The job requires extended periods of time working outdoors with moderate to heavy (75lbs+) lifting.Periodic travel is required, and on-call duties may be needed. Field technicians must be available to work some weekends, holidays and overtime as needed.Responsibilities:Communicate and coordinate with dispatcher for daily assignmentsPerform field materials testing of soil, asphalt, masonry, and concretePerform soil, concrete, aggregate and asphalt sampling and testingObtain necessary lab technician certificationsPrepare detailed and accurate field reports on a daily basisReport to Project Managers, CMT Supervisors, contractors regarding construction issuesPeriodic travel is required, and on-call duties may be neededUpdate Supervisor and Dispatcher on progress and delays on every projectWorking hours: 8:00 AM - 5:00 PMSkills:Ability to read and interpret plans, specifications, safety rules, operating and maintenance instructions, and procedure manualsAccuracy, attention to detail and timeliness with project results requiredObtain necessary field technician certificationsValid Texas Driver's LicenseEducation:High SchoolExperience:1-4 yearsQualifications:3 years Construction and/or materials testing experienceFamiliarity with ASTM procedures for soil, asphalt and concrete testing preferredProcedural and process-oriented structure, due to strict regulatory requirementsHigh school diploma or GED equivalentWilling to travel with a flexible schedule Apply nowSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Pensacola, Florida
      • Permanent
      • $60,000 - $90,000 per year
      • 8:00 AM - 5:00 AM
      We are looking for a structural engineer to oversee our Client's construction projects. You'll ensure that structures are safe and strong. As a structural engineer, you'll spend time both in our office - designing and planning project details - and on-site where you'll provide technical advice to construction workers.To succeed in this role, you should have hands-on experience using several construction methods and materials and advanced knowledge of AutoCAD. Project management and analytical skills are also very important.Responsibilities:Perform Structural design and analysis for a variety of projects using a variety of new and existing building materialsPlan, research, and design structures and systems from Concept to Final Design including:Perform site visits to assess project requirementsPerform structural inspections and evaluations of existing structuresCreate project scopes and timelinesProduct detailed calculations and contract documents for commercial, educational, and federal projectsCoordinate with multiple disciplinesWorking hours: 8:00 AM - 5:00 AMSkills:Thorough knowledge of utilizing applicable design codes, theories, practices and procedures (ACI, ASCE, AISC, IBC, UFC, US state/local permit rules)Excellent written and verbal communicationExcellent workload managementEducation:BachelorsExperience:1-4 yearsQualifications:Must be a US Citizen3 years experience a mustBachelor's or Master's Degree in Civil/Structural EngineeringProficiency with BIM AutoDesk, AutoCAD, Revit, RAM Structural Systems, RAM elements, and Excel Apply Now!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We are looking for a structural engineer to oversee our Client's construction projects. You'll ensure that structures are safe and strong. As a structural engineer, you'll spend time both in our office - designing and planning project details - and on-site where you'll provide technical advice to construction workers.To succeed in this role, you should have hands-on experience using several construction methods and materials and advanced knowledge of AutoCAD. Project management and analytical skills are also very important.Responsibilities:Perform Structural design and analysis for a variety of projects using a variety of new and existing building materialsPlan, research, and design structures and systems from Concept to Final Design including:Perform site visits to assess project requirementsPerform structural inspections and evaluations of existing structuresCreate project scopes and timelinesProduct detailed calculations and contract documents for commercial, educational, and federal projectsCoordinate with multiple disciplinesWorking hours: 8:00 AM - 5:00 AMSkills:Thorough knowledge of utilizing applicable design codes, theories, practices and procedures (ACI, ASCE, AISC, IBC, UFC, US state/local permit rules)Excellent written and verbal communicationExcellent workload managementEducation:BachelorsExperience:1-4 yearsQualifications:Must be a US Citizen3 years experience a mustBachelor's or Master's Degree in Civil/Structural EngineeringProficiency with BIM AutoDesk, AutoCAD, Revit, RAM Structural Systems, RAM elements, and Excel Apply Now!!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Pensacola, Florida
      • Permanent
      • $100,000 - $120,000 per year
      • 8:00 AM - 5:00 PM
      We are seeking a Structural Engineer, PE for our client in the Pensacola Area!Responsibilities:Structural engineers design buildings, bridges, and other types of structures. They build 2D and 3D models using computer-aided design technology (e.g. AutoCAD). They measure loads and presses to secure structural soundness.Working hours: 8:00 AM - 5:00 PMSkills:As a candidate you should be proficient at most or all of the following:- Structural Engineering and Inspection experience- Proficiency of design of cast-in-place concrete, structural steel, and reinforced masonry.- Experience with RAM, ETABS and other structural engineering software.- Working knowledge of Revit Structure preferred.- Able to maintain multiple engineering projects and manage CAD personnel.Education:BachelorsExperience:4-7 yearsQualifications:And should possess some or most of the following traits:Must be a US Citizen?? BS in Structural Engineering; MS preferred.?? Professional Engineer (preferably SE)?? Strong engineering technical skills in all building types.?? Excellent organizational and communication skills.?? Enthusiastic, self-motivated, pro-active and team-oriented. Apply Now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We are seeking a Structural Engineer, PE for our client in the Pensacola Area!Responsibilities:Structural engineers design buildings, bridges, and other types of structures. They build 2D and 3D models using computer-aided design technology (e.g. AutoCAD). They measure loads and presses to secure structural soundness.Working hours: 8:00 AM - 5:00 PMSkills:As a candidate you should be proficient at most or all of the following:- Structural Engineering and Inspection experience- Proficiency of design of cast-in-place concrete, structural steel, and reinforced masonry.- Experience with RAM, ETABS and other structural engineering software.- Working knowledge of Revit Structure preferred.- Able to maintain multiple engineering projects and manage CAD personnel.Education:BachelorsExperience:4-7 yearsQualifications:And should possess some or most of the following traits:Must be a US Citizen?? BS in Structural Engineering; MS preferred.?? Professional Engineer (preferably SE)?? Strong engineering technical skills in all building types.?? Excellent organizational and communication skills.?? Enthusiastic, self-motivated, pro-active and team-oriented. Apply Now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • St Charles, Michigan
      • Permanent
      • $35.00 per hour
      • 3:00 PM - 11:00 PM
      Spherion is seeking an experienced Automation Engineer to join our St Charles team on a 2ND SHIFT! This is both a strategic and hands-on role that is critical in executing our key results, providing great internal customer support, and driving operations excellence and process improvement. The EMT would be responsible for installing, troubleshooting, repairing (building some parts of the back end of machines), and maintaining production and facility equipment, in addition to problem solve manufacturing and supporting processes. This position provides a wonderful opportunity to grow into a global resource for our other sites. This is a Direct Hire opportunity with an excellent benefits package which includes healthcare, paid days off, and a 401K plan. This is a 2nd shift with weekends and rotational on call.Responsibilities:Ability to read and understand schematics, blueprints, and diagrams to find the sequence and method of assembly of a piece of equipment, machine, or part.A thorough component level understanding of electrical devices used in manufacturingAbility to troubleshoot electrical, mechanical, and pneumatic control systems and clearly communicate technical solutions for any control system challenges.Familiar with automation and controls industry standards and support contacts.Excellent interpersonal, listening, questioning and communication skills (written and oral)Ability to work on several projects simultaneously with varying scope and effectively prioritize workload to ensure deliverables are metExcellent work ethic, ability to learn hands-on, attention to detailAbility to multi-task and work cross-functionallyAbility to properly balance cost, schedule and quality of the delivered projectKnowledge of Server and Network architecture and administrationAbility to verify parts dimensions using precision measuring instruments to be sure specifications are met.Skills:The EMT position requires a passionate individual who demonstrates initiative, can work independently takes ownership for project work, and exhibits a high level of integrity. Additionally, the Electro-Mechanical Technician should have creative problem-solving skills and patience to evaluate and troubleshoot process and control system performance. The ideal candidate would have experience in electrical design and programming and be extremely knowledgeable in the following:Electrical Design and TroubleshootingComputer Structure and Logic SciencesApplied and Theoretical Physics, Mathematics, SciencesDC, AC, advanced electricity and troubleshooting analog and digital electronicsInstrumentation and control systemsProgrammable logic controllersComputer programming and codingNetworking and communicationDrafting, imaging, and design of functional systemsRobotics and 3D printer conceptsHydraulics, pneumatics, and mechanical systemsDesign, maintenance, troubleshooting, and repair of operation of automation systemsQualifications:Required Education, Certifications:Associate's degree in Electro-Mechanical Technology or similar degree (Bachelor's degree is a plus) or relevant functional experience required2-10 years' experience in design and/or manufacturing environmentBNR Prolog highly desirableProven experience with PLC Programming (Allen Bradley preferred) hydraulics, pneumatics, mechanical and engineering.Knowledge of Allen Bradley, Wonderware, FactoryTalk, PlantPAX software preferredPrevious experience with Lean and Six Sigma a plusMechanical design experience a plus*Candidate selection is subject to background check and drug screening.Are you looking for your next CAREER in Electro-Mechanical work with Automation? Look no further and apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is seeking an experienced Automation Engineer to join our St Charles team on a 2ND SHIFT! This is both a strategic and hands-on role that is critical in executing our key results, providing great internal customer support, and driving operations excellence and process improvement. The EMT would be responsible for installing, troubleshooting, repairing (building some parts of the back end of machines), and maintaining production and facility equipment, in addition to problem solve manufacturing and supporting processes. This position provides a wonderful opportunity to grow into a global resource for our other sites. This is a Direct Hire opportunity with an excellent benefits package which includes healthcare, paid days off, and a 401K plan. This is a 2nd shift with weekends and rotational on call.Responsibilities:Ability to read and understand schematics, blueprints, and diagrams to find the sequence and method of assembly of a piece of equipment, machine, or part.A thorough component level understanding of electrical devices used in manufacturingAbility to troubleshoot electrical, mechanical, and pneumatic control systems and clearly communicate technical solutions for any control system challenges.Familiar with automation and controls industry standards and support contacts.Excellent interpersonal, listening, questioning and communication skills (written and oral)Ability to work on several projects simultaneously with varying scope and effectively prioritize workload to ensure deliverables are metExcellent work ethic, ability to learn hands-on, attention to detailAbility to multi-task and work cross-functionallyAbility to properly balance cost, schedule and quality of the delivered projectKnowledge of Server and Network architecture and administrationAbility to verify parts dimensions using precision measuring instruments to be sure specifications are met.Skills:The EMT position requires a passionate individual who demonstrates initiative, can work independently takes ownership for project work, and exhibits a high level of integrity. Additionally, the Electro-Mechanical Technician should have creative problem-solving skills and patience to evaluate and troubleshoot process and control system performance. The ideal candidate would have experience in electrical design and programming and be extremely knowledgeable in the following:Electrical Design and TroubleshootingComputer Structure and Logic SciencesApplied and Theoretical Physics, Mathematics, SciencesDC, AC, advanced electricity and troubleshooting analog and digital electronicsInstrumentation and control systemsProgrammable logic controllersComputer programming and codingNetworking and communicationDrafting, imaging, and design of functional systemsRobotics and 3D printer conceptsHydraulics, pneumatics, and mechanical systemsDesign, maintenance, troubleshooting, and repair of operation of automation systemsQualifications:Required Education, Certifications:Associate's degree in Electro-Mechanical Technology or similar degree (Bachelor's degree is a plus) or relevant functional experience required2-10 years' experience in design and/or manufacturing environmentBNR Prolog highly desirableProven experience with PLC Programming (Allen Bradley preferred) hydraulics, pneumatics, mechanical and engineering.Knowledge of Allen Bradley, Wonderware, FactoryTalk, PlantPAX software preferredPrevious experience with Lean and Six Sigma a plusMechanical design experience a plus*Candidate selection is subject to background check and drug screening.Are you looking for your next CAREER in Electro-Mechanical work with Automation? Look no further and apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Fargo, North Dakota
      • Permanent
      • $68,000 - $95,000 per year
      • Various Shifts Available
      Spherion Staffing is working with a Global Manufacturing company in hiring a Mechanical Design Engineer in Fargo. We are seeking passionate people who innovate, collaborate and love what they do. Entrepreneurial spirit is preferred as the company develops future technologies and supports talent to deploy their skills and reach their full potential. Responsibilities: -Produce a mechanical design for packaging machinery meeting customers' specifications -Handle all aspects of design engineering work & provide support to the machining and assembly areas-Experience and knowledge of Pro/E or similar system to model purchase and custom parts-Draft detailed multi-view drawings of machine and products, perform R&D, & prototyping of new product development -Evaluate and approve design changes, specifications, and drawing releases-Review product design for compliance and engineering principles, company standards, and customer's requirements-Work with vendors, customers, and employees on a professional level-Determine problem analysis and problem resolution-Troubleshoot to solve problems related to assigned projects-Create BOM's for purchased parts and machined parts-Directly communicate with customers in the form of meetings and presentations to understand and define their needs-Ability to travel to customer's plant to give presentation on their system and the assemblies that make up the systemResponsibilities:See aboveWorking hours: Various Shifts AvailableSkills:Qualifications:- B.S. degree in Mechanical Engineering or equivalent- Minimum 5 years of experience and knowledge in mechanical design in automation or related field- Prefer 2 years of FAI design engineering experience- Moderate or higher skill level in Pro/Engineer software- Capable of designing new concepts and standards- Ability to think ahead and plan over a 3-6 month time span- Possess leadership, interpersonal and communication skills- Interest and ability to travel 10% of the yearEducation:BachelorsExperience:4-7 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply or email your resume to kathleentoft@spherion.comSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is working with a Global Manufacturing company in hiring a Mechanical Design Engineer in Fargo. We are seeking passionate people who innovate, collaborate and love what they do. Entrepreneurial spirit is preferred as the company develops future technologies and supports talent to deploy their skills and reach their full potential. Responsibilities: -Produce a mechanical design for packaging machinery meeting customers' specifications -Handle all aspects of design engineering work & provide support to the machining and assembly areas-Experience and knowledge of Pro/E or similar system to model purchase and custom parts-Draft detailed multi-view drawings of machine and products, perform R&D, & prototyping of new product development -Evaluate and approve design changes, specifications, and drawing releases-Review product design for compliance and engineering principles, company standards, and customer's requirements-Work with vendors, customers, and employees on a professional level-Determine problem analysis and problem resolution-Troubleshoot to solve problems related to assigned projects-Create BOM's for purchased parts and machined parts-Directly communicate with customers in the form of meetings and presentations to understand and define their needs-Ability to travel to customer's plant to give presentation on their system and the assemblies that make up the systemResponsibilities:See aboveWorking hours: Various Shifts AvailableSkills:Qualifications:- B.S. degree in Mechanical Engineering or equivalent- Minimum 5 years of experience and knowledge in mechanical design in automation or related field- Prefer 2 years of FAI design engineering experience- Moderate or higher skill level in Pro/Engineer software- Capable of designing new concepts and standards- Ability to think ahead and plan over a 3-6 month time span- Possess leadership, interpersonal and communication skills- Interest and ability to travel 10% of the yearEducation:BachelorsExperience:4-7 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply or email your resume to kathleentoft@spherion.comSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Rockledge, Florida
      • Permanent
      • $55,000 - $75,000 per year
      • 7:00 AM - 3:30 PM
      We are looking for a SMT Process Engineer will primarily be responsible for evaluating, implementing and monitoring processes and operating systems for the SMT department.Responsibilities:- Evaluate, implement, and monitor SMT processes and operating systems- Perform preventative and routine maintenance for SMT equipment- Monitors and improves efficiency, output, and safety of manufacturing processes- Communicate with supervisors and peers to resolve issues- Participate in company or special training classes with emphasis on employee improvement- Ensures work area is kept clean and safety rules are followed- Perform other reasonable duties as assignedWorking hours: 7:00 AM - 3:30 PMSkills:-Ability to follow direction from management-Working experience with RoHS and no clean processes-Ability to program, setup, and load circuit boards onto machines-Working knowledge of IPC-610 and J-STD001 workmanship criteria-Ability to read engineering documentation-Working knowledge of ISO 9001, AS9100, ISO 13485-Commitment to company values-Excellent interpersonal and communication skills-Must be able to conduct preventative and routine maintenance for SMT equipment-Ability to follow direction from management-Must be able to operate SMT automatic assembly equipment: Screen Printer, SPI, Pick & Place, and Reflow Oven-Must be able to troubleshoot and repair SMT equipment-Ability to work well independently and within a team-Must be able to provide programming and technical support for SMT process equipmentEducation:AssociateExperience:7-10 yearsQualifications:- A technical degree (EE, ME, or Engineering Technology) or equivalent experience in electronics manufacturing (SMT designation) is required- Minimum of 3 years working experience in manufacturing environment is required- Minimum of 3 years of working experience with SMT processes and equipment is required Please apply online or email your resume directly to the recruiter, ashleytuccio@spherion.comSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We are looking for a SMT Process Engineer will primarily be responsible for evaluating, implementing and monitoring processes and operating systems for the SMT department.Responsibilities:- Evaluate, implement, and monitor SMT processes and operating systems- Perform preventative and routine maintenance for SMT equipment- Monitors and improves efficiency, output, and safety of manufacturing processes- Communicate with supervisors and peers to resolve issues- Participate in company or special training classes with emphasis on employee improvement- Ensures work area is kept clean and safety rules are followed- Perform other reasonable duties as assignedWorking hours: 7:00 AM - 3:30 PMSkills:-Ability to follow direction from management-Working experience with RoHS and no clean processes-Ability to program, setup, and load circuit boards onto machines-Working knowledge of IPC-610 and J-STD001 workmanship criteria-Ability to read engineering documentation-Working knowledge of ISO 9001, AS9100, ISO 13485-Commitment to company values-Excellent interpersonal and communication skills-Must be able to conduct preventative and routine maintenance for SMT equipment-Ability to follow direction from management-Must be able to operate SMT automatic assembly equipment: Screen Printer, SPI, Pick & Place, and Reflow Oven-Must be able to troubleshoot and repair SMT equipment-Ability to work well independently and within a team-Must be able to provide programming and technical support for SMT process equipmentEducation:AssociateExperience:7-10 yearsQualifications:- A technical degree (EE, ME, or Engineering Technology) or equivalent experience in electronics manufacturing (SMT designation) is required- Minimum of 3 years working experience in manufacturing environment is required- Minimum of 3 years of working experience with SMT processes and equipment is required Please apply online or email your resume directly to the recruiter, ashleytuccio@spherion.comSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Fargo, North Dakota
      • Permanent
      • $70,000 - $90,000 per year
      • 8:00 AM - 5:00 PM
      Spherion Staffing is looking for an experienced Bridge Engineer with Three to five years of experience in civil engineering and structural design experience.The Bridge Engineer will work with the Drafting and Engineering department to finalize the design of bridges and bridge projects from smaller modular/pedestrian bridges all the way up to large multi-lane interstate bridges).Monday-Friday 8 am-5 pmDirect Hire OpportunitySalary $70-90k/year DOEResponsibilities:- Responsible for Final Design of Bridge Projects won by TNS (this includes performing complex engineering computations and properly designing structures to all AASHTO, AISC, ACI, State and Local Codes)- Create bridge models using structural software and evaluate for completenessWork with Drafting Staff to transform engineering designs into shop drawings- Review and follow project drawings and specifications and apply them to bridge designs- Review shop drawings produced by Drafting Staff to make sure drawings are correct to the design and project requirements- Review sign and seal other bridge engineer's designs and calculations- Understand the design of all bridge products including Steel Deck, SuperSill, and prefabricated backwalls- Understand the bridge manufacturing process and have the ability to design around any shop restrictions and/or shipping limitations- Occasionally travel to project locations to help with bridge installations- Occasionally travel to work sites to help with fabrication- Occasionally attend local and national networking and continuing education seminars- Assist Sales Staff with preliminary project recommendations- Assist Estimators are needed- Assist with maintaining and updating design tools- Perform Bridge Load RatingsResponsibilities:See aboveWorking hours: 8:00 AM - 5:00 PMSkills:Requirements:-Bachelor's or Master's degree in Civil Engineering-Three to five years of experience in civil engineering and structural design preferred, but not required-A PE license or the ability to obtain one in one (1) years or less-Knowledge of bridge design programs-Knowledge of AASHTO, AISC, ACI, NDS, ASCE-7, and other structural codes-Exceptional communication skills-Ability to operate at a rapid pace which will require ability to triage priorities and take action-Proficiency with Microsoft Office, AutoCAD, and common structural engineering design software's-Experience using IES and AASHTOWare BrR is preferred-Proficiency at creating bridge designs in an accurate and timely manner-Ability to read bridge plans and interpret specifications-Ability to hold Drafting Staff and other Bridge Engineers accountable to produce designs on time and accuratelyEducation:BachelorsExperience:4-7 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Michael Smith at 701-412-2914Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is looking for an experienced Bridge Engineer with Three to five years of experience in civil engineering and structural design experience.The Bridge Engineer will work with the Drafting and Engineering department to finalize the design of bridges and bridge projects from smaller modular/pedestrian bridges all the way up to large multi-lane interstate bridges).Monday-Friday 8 am-5 pmDirect Hire OpportunitySalary $70-90k/year DOEResponsibilities:- Responsible for Final Design of Bridge Projects won by TNS (this includes performing complex engineering computations and properly designing structures to all AASHTO, AISC, ACI, State and Local Codes)- Create bridge models using structural software and evaluate for completenessWork with Drafting Staff to transform engineering designs into shop drawings- Review and follow project drawings and specifications and apply them to bridge designs- Review shop drawings produced by Drafting Staff to make sure drawings are correct to the design and project requirements- Review sign and seal other bridge engineer's designs and calculations- Understand the design of all bridge products including Steel Deck, SuperSill, and prefabricated backwalls- Understand the bridge manufacturing process and have the ability to design around any shop restrictions and/or shipping limitations- Occasionally travel to project locations to help with bridge installations- Occasionally travel to work sites to help with fabrication- Occasionally attend local and national networking and continuing education seminars- Assist Sales Staff with preliminary project recommendations- Assist Estimators are needed- Assist with maintaining and updating design tools- Perform Bridge Load RatingsResponsibilities:See aboveWorking hours: 8:00 AM - 5:00 PMSkills:Requirements:-Bachelor's or Master's degree in Civil Engineering-Three to five years of experience in civil engineering and structural design preferred, but not required-A PE license or the ability to obtain one in one (1) years or less-Knowledge of bridge design programs-Knowledge of AASHTO, AISC, ACI, NDS, ASCE-7, and other structural codes-Exceptional communication skills-Ability to operate at a rapid pace which will require ability to triage priorities and take action-Proficiency with Microsoft Office, AutoCAD, and common structural engineering design software's-Experience using IES and AASHTOWare BrR is preferred-Proficiency at creating bridge designs in an accurate and timely manner-Ability to read bridge plans and interpret specifications-Ability to hold Drafting Staff and other Bridge Engineers accountable to produce designs on time and accuratelyEducation:BachelorsExperience:4-7 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Michael Smith at 701-412-2914Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Leesburg, Florida
      • Permanent
      • $85,000 - $95,000 per year
      • 8:00 AM - 5:00 PM
      Spherion has partnered with a fast growing Leesburg manufacturer seeking an experienced Senior Manufacturing Engineer to join their team. This position will assist with plans and designs manufacturing processes in an industrial plant. Improve production methods, determine manufacturing capacity, and set up production schedules. Provides support in the design, fabrication, modification, and evaluation in support of manufacturing operations such as machining, metal forming, plastics processing, welding and brazing, assembly, and material handling. This is an immediate direct hire opportunity for a skilled Manufacturing Engineer that learns quickly and isn't afraid to get dirty in order to resolve issues. Compensation is (DOE) + benefits package offered with this role.Responsibilities:Specific duties include, but are not limited to:- Develops, evaluates, and improves manufacturing methods.- Analyzes and plans work force utilization, space requirements, and workflow, and designs layout of equipment and workspace for maximum efficiency.- Manufacturing processes include but are not limited to: Concrete molding, plastic injection molding, plastic extrusion, plastic thermoforming, plastic recycling and chemical blending.- Confers with planning and design staff concerning product design and tooling to ensure efficient production methods.- Confers with vendors to determine product specifications and arrange for purchase of equipment, materials, or parts, and evaluates products according to specifications and quality standards.- Estimates production times, staffing requirements, and related costs to provide information for management decisions.- Confers with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate production processes.- Applies statistical methods to estimate future manufacturing requirements and potential.Working hours: 8:00 AM - 5:00 PMSkills:- Must be able to work in a fast paced, high volume environment, and have a strong attention to detail. - Must be a proactive "self starter" who can work well without supervision.- Strong math skills and mechanical aptitude. - Proficiency with Microsoft Office Suite, 2D, CAD & solid modeling. PLC experience a plus. 3- Good internet research skills. - Good verbal and written communications skills.Education:BachelorsExperience:4-7 yearsQualifications:- Requires 5 to 7 years of experience as an engineer in manufacturing Environment.- Bachelor of Science in Engineering, preferably mechanical or industrial. Please apply with a current resume for immediate consideration.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion has partnered with a fast growing Leesburg manufacturer seeking an experienced Senior Manufacturing Engineer to join their team. This position will assist with plans and designs manufacturing processes in an industrial plant. Improve production methods, determine manufacturing capacity, and set up production schedules. Provides support in the design, fabrication, modification, and evaluation in support of manufacturing operations such as machining, metal forming, plastics processing, welding and brazing, assembly, and material handling. This is an immediate direct hire opportunity for a skilled Manufacturing Engineer that learns quickly and isn't afraid to get dirty in order to resolve issues. Compensation is (DOE) + benefits package offered with this role.Responsibilities:Specific duties include, but are not limited to:- Develops, evaluates, and improves manufacturing methods.- Analyzes and plans work force utilization, space requirements, and workflow, and designs layout of equipment and workspace for maximum efficiency.- Manufacturing processes include but are not limited to: Concrete molding, plastic injection molding, plastic extrusion, plastic thermoforming, plastic recycling and chemical blending.- Confers with planning and design staff concerning product design and tooling to ensure efficient production methods.- Confers with vendors to determine product specifications and arrange for purchase of equipment, materials, or parts, and evaluates products according to specifications and quality standards.- Estimates production times, staffing requirements, and related costs to provide information for management decisions.- Confers with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate production processes.- Applies statistical methods to estimate future manufacturing requirements and potential.Working hours: 8:00 AM - 5:00 PMSkills:- Must be able to work in a fast paced, high volume environment, and have a strong attention to detail. - Must be a proactive "self starter" who can work well without supervision.- Strong math skills and mechanical aptitude. - Proficiency with Microsoft Office Suite, 2D, CAD & solid modeling. PLC experience a plus. 3- Good internet research skills. - Good verbal and written communications skills.Education:BachelorsExperience:4-7 yearsQualifications:- Requires 5 to 7 years of experience as an engineer in manufacturing Environment.- Bachelor of Science in Engineering, preferably mechanical or industrial. Please apply with a current resume for immediate consideration.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Beloit, Wisconsin
      • Permanent
      • $21.00 - $27.00 per hour
      • 6:00 AM - 3:30 PM
      Spherion is working with a precision machining and design company in Beloit, WI to help identify a 1st shift Tool & Die Maker to join their highly skilled internal team! This Direct Hire opportunity offers a competitive - wide range of benefits for a skilled Tool & Die Maker who will be recognized by a company that's been in business for over 80-years! If this is your direction and skill set - keep reading! - $20 to $27/hr to start based on experience- Full benefit platform - Health, Dental, STD & Life Ins (if chosen to take) all starts after 30-days of employment at the start of the following month!- "Climate Controlled Facility" - Comfortable, Safe and Inviting!- Mon-Fri from 6 to 3:30pm - Sat from 6 to 10am (Occasionally based on work load)- Occasionally, times may vary - Overtime is available and occasionally required- New hire reviews at 90-days from the start date!- Performance reviews conducted on work anniversaries each year!- 401K starts after 90-days on the first of the following month!Responsibilities:The typical day for the Tool & Die Maker includes determining specifications for tools, fixtures, and calibration instruments by assessing dimensions and materials reflected in blueprints. You will select materials, special tooling and raw materials to be used by laying out and determining the dimensional allowances and sequence of operations to be followed in fabricating tools, fixtures and instruments. Machine operations include compound angles and multiple set-ups using engine lathes, vertical mills, drill presses and surface grinders to fabricate tools, dies, fixtures and instruments to finish tools by fitting and grinding. Other specialized skills include:Working hours: 6:00 AM - 3:30 PMSkills:- Minimum of 5 years' Tool and Die Making experience- Machine set up while possessing the ability to conceptualize and visualize operations to tools, dies, fixtures and measuring instruments.- Machining technology, mechanical principles and advanced shop mathematics.- Proficiency in AutoCAD, blueprint reading and die repair.- Must own and utilize tools- Possess and above average understanding of GD&T - Possess good communication skills when interacting with all levels of internal customers, fellow team members and management.Education:No Degree RequiredExperience:4-7 yearsQualifications:- Must be able to lift up to 50lbs- HS Diploma or equivalent - A background check is required- A drug test is requiredApply today for immediate consideration!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is working with a precision machining and design company in Beloit, WI to help identify a 1st shift Tool & Die Maker to join their highly skilled internal team! This Direct Hire opportunity offers a competitive - wide range of benefits for a skilled Tool & Die Maker who will be recognized by a company that's been in business for over 80-years! If this is your direction and skill set - keep reading! - $20 to $27/hr to start based on experience- Full benefit platform - Health, Dental, STD & Life Ins (if chosen to take) all starts after 30-days of employment at the start of the following month!- "Climate Controlled Facility" - Comfortable, Safe and Inviting!- Mon-Fri from 6 to 3:30pm - Sat from 6 to 10am (Occasionally based on work load)- Occasionally, times may vary - Overtime is available and occasionally required- New hire reviews at 90-days from the start date!- Performance reviews conducted on work anniversaries each year!- 401K starts after 90-days on the first of the following month!Responsibilities:The typical day for the Tool & Die Maker includes determining specifications for tools, fixtures, and calibration instruments by assessing dimensions and materials reflected in blueprints. You will select materials, special tooling and raw materials to be used by laying out and determining the dimensional allowances and sequence of operations to be followed in fabricating tools, fixtures and instruments. Machine operations include compound angles and multiple set-ups using engine lathes, vertical mills, drill presses and surface grinders to fabricate tools, dies, fixtures and instruments to finish tools by fitting and grinding. Other specialized skills include:Working hours: 6:00 AM - 3:30 PMSkills:- Minimum of 5 years' Tool and Die Making experience- Machine set up while possessing the ability to conceptualize and visualize operations to tools, dies, fixtures and measuring instruments.- Machining technology, mechanical principles and advanced shop mathematics.- Proficiency in AutoCAD, blueprint reading and die repair.- Must own and utilize tools- Possess and above average understanding of GD&T - Possess good communication skills when interacting with all levels of internal customers, fellow team members and management.Education:No Degree RequiredExperience:4-7 yearsQualifications:- Must be able to lift up to 50lbs- HS Diploma or equivalent - A background check is required- A drug test is requiredApply today for immediate consideration!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Montgomery, Alabama
      • Permanent
      • $50,000 - $73,000 per year
      • 7:00 AM - 4:00 PM
      The Manufacturing/Process Engineer will primarily perform duties that include identifying opportunities or will primarily perform duties that include developing, configuring and optimizing industrial processes from inception through to start up and certification. Assessing processes, taking measurements and interpreting data. Designing, running, testing and upgrading systems and processes.Responsibilities:- Apply continuous improvement methods such as lean manufacturing to enhance manufacturing quality, reliability, or cost-effectiveness- Develop, configure and optimize industrial processes from inception through to start up and certification- Develop best practices, routines and innovative solutions to improve production rates and quality of output- Communicate manufacturing capabilities, production schedules, or other information to facilitate production processes- Formalize a redesign for in process staging areas for improved process flow- Estimate costs, production times, or staffing requirements for new designs/parts- Evaluate manufactured products according to specifications and quality standards- Incorporate new methods and processes to improve existing operations- Purchase equipment, materials, or parts- Review product designs for manufacturability or completeness- Other duties as assignedWorking hours: 7:00 AM - 4:00 PMSkills:- Microsoft Office computer skills- Problem solving skills- Excellent communication skills, must be punctual and able to work well with others- Experience with LN or equivalent ERP systemsEducation:BachelorsExperience:4-7 yearsQualifications:- BS Degree in Engineering or equivalent.- Previous experience working in a manufacturing environment is a plus- Basic 5S knowledge and experience, lean manufacturing & six sigma experience desired- Prefer candidates with previous experience working in a manufacturing environment of Safety, Quality, On Time Delivery and Cost where everyone is valued and is encouraged to improve products, process, and the business. Apply today and find a job YOU will love!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The Manufacturing/Process Engineer will primarily perform duties that include identifying opportunities or will primarily perform duties that include developing, configuring and optimizing industrial processes from inception through to start up and certification. Assessing processes, taking measurements and interpreting data. Designing, running, testing and upgrading systems and processes.Responsibilities:- Apply continuous improvement methods such as lean manufacturing to enhance manufacturing quality, reliability, or cost-effectiveness- Develop, configure and optimize industrial processes from inception through to start up and certification- Develop best practices, routines and innovative solutions to improve production rates and quality of output- Communicate manufacturing capabilities, production schedules, or other information to facilitate production processes- Formalize a redesign for in process staging areas for improved process flow- Estimate costs, production times, or staffing requirements for new designs/parts- Evaluate manufactured products according to specifications and quality standards- Incorporate new methods and processes to improve existing operations- Purchase equipment, materials, or parts- Review product designs for manufacturability or completeness- Other duties as assignedWorking hours: 7:00 AM - 4:00 PMSkills:- Microsoft Office computer skills- Problem solving skills- Excellent communication skills, must be punctual and able to work well with others- Experience with LN or equivalent ERP systemsEducation:BachelorsExperience:4-7 yearsQualifications:- BS Degree in Engineering or equivalent.- Previous experience working in a manufacturing environment is a plus- Basic 5S knowledge and experience, lean manufacturing & six sigma experience desired- Prefer candidates with previous experience working in a manufacturing environment of Safety, Quality, On Time Delivery and Cost where everyone is valued and is encouraged to improve products, process, and the business. Apply today and find a job YOU will love!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Montgomery, Alabama
      • Permanent
      • $63,000 - $92,000 per year
      • 7:00 AM - 4:00 PM
      The Mechanical Engineer will work independently on highly engineered, heavy equipment products in order to meet customer specifications and requirements. The individual in this position is expected to evaluate, select, and apply standard engineering techniques, procedures, and criteria using sound judgment in design and modification of mobile construction equipment. On-site engineering capabilities include structural, mechanical, electrical, fluids, and powertrain design work.Responsibilities:- Project management duties including directing the work of junior engineers and designers while also performing design engineering duties- Work to also include performing the design, analysis, and testing of mobile equipment structures, systems, and components- Performing FEA analysis on mobile equipment frames and assemblies- Reviewing customer specifications, railroad regulations, and government regulations to determine proper design parameters for custom designed product- Producing an error free engineering design package using sound engineering practices- Clearly communicating with engineering personnel, suppliers, plant personnel, and others to implement cost reductions, product improvements, process improvements, and to support product build processes- Evaluate and implement engineering changes for improvements and cost reductions- Provide technical direction to manufacturing, procurement, assembly, aftermarket parts and service personnel- Other duties as assignedWorking hours: 7:00 AM - 4:00 PMSkills:- Must have the ability to communicate technical information effectively with team members and others both inside and outside the immediate work group- Proficient within a Lean Transformation/ Continuous Improvement Culture- Able to contribute as a team member in an environment based on KPI's and execution of SMART goals- Experience working in a continuous improvement culture of Lean manufacturing and 5S- Knowledge of Quality Management Systems, ISO 9001Education:BachelorsExperience:7-10 yearsQualifications:- 7+ years of experience required, experience with specialist vehicle design and manufacture preferred- Project Planning, Project Management, and supervisory experience is required- New Product Development experience is required- 3D design software experience is required, Autodesk Inventor is preferred- Experience with FEA is required- Thorough understanding of manufacturing and fabrication processes are required Apply today and find a job YOU will love!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The Mechanical Engineer will work independently on highly engineered, heavy equipment products in order to meet customer specifications and requirements. The individual in this position is expected to evaluate, select, and apply standard engineering techniques, procedures, and criteria using sound judgment in design and modification of mobile construction equipment. On-site engineering capabilities include structural, mechanical, electrical, fluids, and powertrain design work.Responsibilities:- Project management duties including directing the work of junior engineers and designers while also performing design engineering duties- Work to also include performing the design, analysis, and testing of mobile equipment structures, systems, and components- Performing FEA analysis on mobile equipment frames and assemblies- Reviewing customer specifications, railroad regulations, and government regulations to determine proper design parameters for custom designed product- Producing an error free engineering design package using sound engineering practices- Clearly communicating with engineering personnel, suppliers, plant personnel, and others to implement cost reductions, product improvements, process improvements, and to support product build processes- Evaluate and implement engineering changes for improvements and cost reductions- Provide technical direction to manufacturing, procurement, assembly, aftermarket parts and service personnel- Other duties as assignedWorking hours: 7:00 AM - 4:00 PMSkills:- Must have the ability to communicate technical information effectively with team members and others both inside and outside the immediate work group- Proficient within a Lean Transformation/ Continuous Improvement Culture- Able to contribute as a team member in an environment based on KPI's and execution of SMART goals- Experience working in a continuous improvement culture of Lean manufacturing and 5S- Knowledge of Quality Management Systems, ISO 9001Education:BachelorsExperience:7-10 yearsQualifications:- 7+ years of experience required, experience with specialist vehicle design and manufacture preferred- Project Planning, Project Management, and supervisory experience is required- New Product Development experience is required- 3D design software experience is required, Autodesk Inventor is preferred- Experience with FEA is required- Thorough understanding of manufacturing and fabrication processes are required Apply today and find a job YOU will love!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Montgomery, Alabama
      • Permanent
      • $49,000 - $75,000 per year
      • 7:00 AM - 4:00 PM
      The Electrical Engineer will work independently on highly engineered, heavy equipment products in order to meet customer specifications and requirements. The individual in this position is expected to evaluate, select, and apply standard engineering techniques, procedures, and criteria using sound judgment in design and modification of mobile construction equipment. On-site engineering capabilities include structural, mechanical, electrical, fluids, and powertrain design work.Responsibilities:- Performing the design, analysis, testing and documentation of mobile equipment electrical systems and components- Comprehend customer specifications, railroad regulations, and government regulations to determine proper design parameters for custom product design- Capable of travelling to remote locations as needed to gather data and feedback on equipment performance- Producing an error free engineering design package using sound engineering practices- Communicate ideas to colleagues and clients through proficient verbal and writing skills. - Active learning as an electrical engineer to acquire new information and incorporate it into daily work- Analysis of others' work product, as well as that of electrical products, components, and applications, to make improvements as required- Other duties as assignedWorking hours: 7:00 AM - 4:00 PMSkills:- Electrical engineering and PCB design- Superior listening skills to understand clients' needs and receive feedback from them and coworkers- Problem-solving to be able to identify problems and come up with viable solutions. - Use of critical thinking skills to evaluating the options and select the best oneEducation:BachelorsExperience:4-7 yearsQualifications:- 3+ years of experience preferred, experience with specialist vehicle design and manufacture preferred;- Competent using a standard multimeter and PC???s on engine controls and vehicle electrical systems for testing and troubleshooting;- Able to read, interpret, and generate or modify electrical schematics and designs;- 3D and 2D design software experience is required;- Must be a self-starter who can work independently or on teams to get the work product completed on-time and on-budget. Apply today and find a job YOU will love!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The Electrical Engineer will work independently on highly engineered, heavy equipment products in order to meet customer specifications and requirements. The individual in this position is expected to evaluate, select, and apply standard engineering techniques, procedures, and criteria using sound judgment in design and modification of mobile construction equipment. On-site engineering capabilities include structural, mechanical, electrical, fluids, and powertrain design work.Responsibilities:- Performing the design, analysis, testing and documentation of mobile equipment electrical systems and components- Comprehend customer specifications, railroad regulations, and government regulations to determine proper design parameters for custom product design- Capable of travelling to remote locations as needed to gather data and feedback on equipment performance- Producing an error free engineering design package using sound engineering practices- Communicate ideas to colleagues and clients through proficient verbal and writing skills. - Active learning as an electrical engineer to acquire new information and incorporate it into daily work- Analysis of others' work product, as well as that of electrical products, components, and applications, to make improvements as required- Other duties as assignedWorking hours: 7:00 AM - 4:00 PMSkills:- Electrical engineering and PCB design- Superior listening skills to understand clients' needs and receive feedback from them and coworkers- Problem-solving to be able to identify problems and come up with viable solutions. - Use of critical thinking skills to evaluating the options and select the best oneEducation:BachelorsExperience:4-7 yearsQualifications:- 3+ years of experience preferred, experience with specialist vehicle design and manufacture preferred;- Competent using a standard multimeter and PC???s on engine controls and vehicle electrical systems for testing and troubleshooting;- Able to read, interpret, and generate or modify electrical schematics and designs;- 3D and 2D design software experience is required;- Must be a self-starter who can work independently or on teams to get the work product completed on-time and on-budget. Apply today and find a job YOU will love!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Troy, Alabama
      • Permanent
      • $100,000 - $150,000 per year
      • 7:00 AM - 5:00 PM
      As a key member of Plant Management Team, the Continuous Improvement Manager will be responsible for driving the culture of sustainable continuous improvement, operational excellence and delivering business expectations.Responsibilities:- Define and design a standard CI program in partnership with central CI and Plant team with the goal of driving continuous operational excellence; through capability building, variability removal and KPI improvements.- Functional pillars (Safety, Quality, Focused Improvement, Operator Care & Maintenance, Preventative Maintenance, Education & Development) processes, supporting templates and foundational tools; with ability to appropriately customize for individual plants / functions models.- Refine / improve elements of the program according to learning from implementations.- Implement and sustain the CI Program.- Establish CI Pillars for agreed functions across the plant.- Establish a program to assess and evaluate organizational progress with the implementation of CI model.- Identify gaps and creative problem solving.- Establish and govern local steering committees.- Develop coaching and training programs to train individuals on pillars, templates, tools and systems.- Deliver and monitor quantifiable KPIs including Waste Reduction, Line Efficiency Improvements, First Time Quality Pass Rate, Changeover Management and Process Control Systems.- Lead the implementation of various CI enablement initiatives to support the execution of core CI objectives.- Define a standard implementation guide / work instruction.- Define a standard for factory data model analysis.- Other CI enablement tools as required.- Support with other activities in relation to continuous improvement.Working hours: 7:00 AM - 5:00 PMSkills:- Ability to lead, mentor, coach and influence others with or without direct authority.- Must have above average analytical and problem-solving skills.- Results driven with the mind-set of creating competitive advance for the organization.- Create and communicate a compelling vision and inspired sense of purpose.- Excellent interpersonal and communication skills, including the ability to resolve conflict, drive change management and project governance.- Balance of strategic thinking and execution excellence.- Must be able to read, write and communicate in English language.- Familiarity with JD Edwards ERP system desired.- Proficiency in Microsoft Excel, Word, Access, and Power PointEducation:BachelorsExperience:4-7 yearsQualifications:- Undergraduate degree from an accredited college/university preferred.- Black Belt Certification preferred; Green Belt Certification required.- Minimum 5-8 years of work experience in a Continuous Improvement function (Lean, Six Sigma and/or Total Productive Maintenance) Apply today and find a job YOU will love!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      As a key member of Plant Management Team, the Continuous Improvement Manager will be responsible for driving the culture of sustainable continuous improvement, operational excellence and delivering business expectations.Responsibilities:- Define and design a standard CI program in partnership with central CI and Plant team with the goal of driving continuous operational excellence; through capability building, variability removal and KPI improvements.- Functional pillars (Safety, Quality, Focused Improvement, Operator Care & Maintenance, Preventative Maintenance, Education & Development) processes, supporting templates and foundational tools; with ability to appropriately customize for individual plants / functions models.- Refine / improve elements of the program according to learning from implementations.- Implement and sustain the CI Program.- Establish CI Pillars for agreed functions across the plant.- Establish a program to assess and evaluate organizational progress with the implementation of CI model.- Identify gaps and creative problem solving.- Establish and govern local steering committees.- Develop coaching and training programs to train individuals on pillars, templates, tools and systems.- Deliver and monitor quantifiable KPIs including Waste Reduction, Line Efficiency Improvements, First Time Quality Pass Rate, Changeover Management and Process Control Systems.- Lead the implementation of various CI enablement initiatives to support the execution of core CI objectives.- Define a standard implementation guide / work instruction.- Define a standard for factory data model analysis.- Other CI enablement tools as required.- Support with other activities in relation to continuous improvement.Working hours: 7:00 AM - 5:00 PMSkills:- Ability to lead, mentor, coach and influence others with or without direct authority.- Must have above average analytical and problem-solving skills.- Results driven with the mind-set of creating competitive advance for the organization.- Create and communicate a compelling vision and inspired sense of purpose.- Excellent interpersonal and communication skills, including the ability to resolve conflict, drive change management and project governance.- Balance of strategic thinking and execution excellence.- Must be able to read, write and communicate in English language.- Familiarity with JD Edwards ERP system desired.- Proficiency in Microsoft Excel, Word, Access, and Power PointEducation:BachelorsExperience:4-7 yearsQualifications:- Undergraduate degree from an accredited college/university preferred.- Black Belt Certification preferred; Green Belt Certification required.- Minimum 5-8 years of work experience in a Continuous Improvement function (Lean, Six Sigma and/or Total Productive Maintenance) Apply today and find a job YOU will love!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Montgomery, Alabama
      • Permanent
      • $50,000 - $60,000 per year
      • 10:00 PM - 7:00 AM
      The EHS Specialist is responsible for consistently carrying out and promoting the EHS program, training Team Members on applicable EHS-related matters, ensuring the company is in compliance with EHS laws and regulations, participating in audits and incident investigations, and carrying out resulting corrective actions.Responsibilities:- Evaluate EHS programs, procedures, and operations for compliance with applicable laws and regulations- Promote implementation of health and wellness programs for all Team Members- Assess workplace environments, equipment, and practices to identify hazards and complete new equipment checklists- Ensure full compliance with EHS standards and government regulations- Conduct hazard and operational control process assessments- Recommend measures to help protect Team Members from potentially hazardous working conditions, methods, processes, or materials- Participate in incident investigations to identify root causes of accidents- Determine corrective actions to reduce the likelihood of accidents in the future- Complete reports and analyze incidents to identify trends- Conduct Safety Management Systems (SMS) audits, Environmental Management Systems (EMS) audits, and/or monthly EHS inspections and assist in corrective actions- Train Team Members on proper use of powered industrial trucks, aerial lifts, tuggers, overhead cranes, and related industrial equipment- Conduct EHS orientation for new Team Members- Administer, coordinate, and comply with all EHS guidelines- All other duties as assignedWorking hours: 10:00 PM - 7:00 AMSkills:- Knowledge of OSHA and EPA regulations- Knowledge of OHSA 18001 and ISO 14001 Management Systems- Knowledge of heavy industrial equipment- Proficiency in Microsoft Outlook, Excel, and PowerPoint- Good written and verbal communication skillsEducation:BachelorsExperience:1-4 yearsQualifications:- High school diploma or equivalent, plus 3 or more years of experience in an EHS-related position in a manufacturing environment OR- Bachelor???s degree in Occupational Safety & Health or related field plus 1 or more years of experience in an EHS-related position in a manufacturing environment- Certified Hazardous Materials Manager (CHMM)- Registered Environmental Manager (REM)- Associate Safety Professional (ASP) certification- CPR/First Aid/AED certification Apply today and find a job YOU will love!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The EHS Specialist is responsible for consistently carrying out and promoting the EHS program, training Team Members on applicable EHS-related matters, ensuring the company is in compliance with EHS laws and regulations, participating in audits and incident investigations, and carrying out resulting corrective actions.Responsibilities:- Evaluate EHS programs, procedures, and operations for compliance with applicable laws and regulations- Promote implementation of health and wellness programs for all Team Members- Assess workplace environments, equipment, and practices to identify hazards and complete new equipment checklists- Ensure full compliance with EHS standards and government regulations- Conduct hazard and operational control process assessments- Recommend measures to help protect Team Members from potentially hazardous working conditions, methods, processes, or materials- Participate in incident investigations to identify root causes of accidents- Determine corrective actions to reduce the likelihood of accidents in the future- Complete reports and analyze incidents to identify trends- Conduct Safety Management Systems (SMS) audits, Environmental Management Systems (EMS) audits, and/or monthly EHS inspections and assist in corrective actions- Train Team Members on proper use of powered industrial trucks, aerial lifts, tuggers, overhead cranes, and related industrial equipment- Conduct EHS orientation for new Team Members- Administer, coordinate, and comply with all EHS guidelines- All other duties as assignedWorking hours: 10:00 PM - 7:00 AMSkills:- Knowledge of OSHA and EPA regulations- Knowledge of OHSA 18001 and ISO 14001 Management Systems- Knowledge of heavy industrial equipment- Proficiency in Microsoft Outlook, Excel, and PowerPoint- Good written and verbal communication skillsEducation:BachelorsExperience:1-4 yearsQualifications:- High school diploma or equivalent, plus 3 or more years of experience in an EHS-related position in a manufacturing environment OR- Bachelor???s degree in Occupational Safety & Health or related field plus 1 or more years of experience in an EHS-related position in a manufacturing environment- Certified Hazardous Materials Manager (CHMM)- Registered Environmental Manager (REM)- Associate Safety Professional (ASP) certification- CPR/First Aid/AED certification Apply today and find a job YOU will love!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Fargo, North Dakota
      • Permanent
      • $18.00 - $27.00 per hour
      • Various Shifts Available
      Spherion Staffing is looking for an Engineering Technician to work with our client, a communication and network company. Successful applicant will provide design assistance and construction supervision of telecommunications outside plant construction projects. Qualified applicants must have an Associate's degree in Telecommunications, Drafting or Construction Management. Experience/knowledge of utility construction preferred. Up to 80% travel is involved in this role.Pay $18-27/hour DOEResponsibilities:- Preparation of construction drawings. This includes electronically drawn staking sheets (Visio) and maps (AutoCAD)- Prepare construction units and progress reports for both the client and CNE.- Easement acquisition- Perform on-site inspection/supervision of the outside plant construction to ensure compliance with the specifications- Record as-built records for the project- Update the construction drawings with as-built data- Entails working outside in a variety of conditions- Overnight and/or extended travel will be required. Overtime mandatory during construction season- Miscellaneous other dutiesResponsibilities:See aboveWorking hours: Various Shifts AvailableSkills:Requirements:-Associates Degree in Telecommunications, Drafting or Construction Management preferred-Experience/knowledge of utility construction preferred-Proficient computer skills (Office, Visio, and AutoCAD preferred)-Good written and verbal communication-Valid driver's license with clear record-Ability to work both independently and in a team-Background check and drug screen requiredEducation:AssociateExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Michael Smith at 701-412-2914Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is looking for an Engineering Technician to work with our client, a communication and network company. Successful applicant will provide design assistance and construction supervision of telecommunications outside plant construction projects. Qualified applicants must have an Associate's degree in Telecommunications, Drafting or Construction Management. Experience/knowledge of utility construction preferred. Up to 80% travel is involved in this role.Pay $18-27/hour DOEResponsibilities:- Preparation of construction drawings. This includes electronically drawn staking sheets (Visio) and maps (AutoCAD)- Prepare construction units and progress reports for both the client and CNE.- Easement acquisition- Perform on-site inspection/supervision of the outside plant construction to ensure compliance with the specifications- Record as-built records for the project- Update the construction drawings with as-built data- Entails working outside in a variety of conditions- Overnight and/or extended travel will be required. Overtime mandatory during construction season- Miscellaneous other dutiesResponsibilities:See aboveWorking hours: Various Shifts AvailableSkills:Requirements:-Associates Degree in Telecommunications, Drafting or Construction Management preferred-Experience/knowledge of utility construction preferred-Proficient computer skills (Office, Visio, and AutoCAD preferred)-Good written and verbal communication-Valid driver's license with clear record-Ability to work both independently and in a team-Background check and drug screen requiredEducation:AssociateExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Michael Smith at 701-412-2914Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Niles, Michigan
      • Permanent
      • $50,000 - $60,000 per year
      • 6:30 AM - 3:00 PM
      Spherion is looking for a CAD Designer in Niles, MI!The CAD Designer is responsible for drafting/drawling product and component revisions and working with Engineers to design and prepare new products for production.This position is DIRECT HIRE and pay is determined by experience ranging from $50,000-$60,000 annually.Please call/text Spherion at 574-282-2761 for more information on this position!Responsibilities:-Prepare CAD models and drawings for production. May include drawing creation, updates, checking, releasing, and/or managing of revisions.-Analyze and resolve manufacturing & technical issues for components and products.-Assist with creation and updating of bills and material.-Assist with engineering publications and communication. May include writing of instruction sheets and manuals, measuring and recording information for specification sheets, and communicating relevant information to others.-Interface with other departments to accomplish project and product goals.Working hours: 6:30 AM - 3:00 PMSkills:-Self-motivated and detail oriented-Great Interpersonal and communication skills-Ability to investigate and analyze problemsEducation:AssociateExperience:1-4 yearsQualifications:-Associates Degree or equivalent from two-year college or technical school; or one year related experience and/or training; or equivalent combination of education and experience is required.-Experience with 2D drafting, drafting standards and best practices is required.-Experience with 3D CAD systems (preferably Autodesk Inventor) is required-Experience with Geometric Dimensioning & Tolerancing Call/Text Spherion at 574-282-2761 to be considered for this great opportunity!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is looking for a CAD Designer in Niles, MI!The CAD Designer is responsible for drafting/drawling product and component revisions and working with Engineers to design and prepare new products for production.This position is DIRECT HIRE and pay is determined by experience ranging from $50,000-$60,000 annually.Please call/text Spherion at 574-282-2761 for more information on this position!Responsibilities:-Prepare CAD models and drawings for production. May include drawing creation, updates, checking, releasing, and/or managing of revisions.-Analyze and resolve manufacturing & technical issues for components and products.-Assist with creation and updating of bills and material.-Assist with engineering publications and communication. May include writing of instruction sheets and manuals, measuring and recording information for specification sheets, and communicating relevant information to others.-Interface with other departments to accomplish project and product goals.Working hours: 6:30 AM - 3:00 PMSkills:-Self-motivated and detail oriented-Great Interpersonal and communication skills-Ability to investigate and analyze problemsEducation:AssociateExperience:1-4 yearsQualifications:-Associates Degree or equivalent from two-year college or technical school; or one year related experience and/or training; or equivalent combination of education and experience is required.-Experience with 2D drafting, drafting standards and best practices is required.-Experience with 3D CAD systems (preferably Autodesk Inventor) is required-Experience with Geometric Dimensioning & Tolerancing Call/Text Spherion at 574-282-2761 to be considered for this great opportunity!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

    Thank you for subscribing to your personalized job alerts.

    It looks like you want to switch your language. This will reset your filters on your current job search.