You are successfully logged out of your my randstad account

You have successfully deleted your account

    Thank you for subscribing to your personalized job alerts.

    103 Operations Manufacturing & Production jobs found

    Filter3
    Clear all
    Page 2
      • Crestview, Florida
      • Temp to Perm
      • $14.50 per hour
      • 7:00 PM - 7:00 AM
      We are seeking multiple Packaging/Machine Operators for our client in the Crestview area. They are looking to hire right away, so if this sounds like a position for you, APPLY NOW!Responsibilities:Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functionsDetects and reports defective materials or questionable conditions to the shift supervisor.Maintains the work area and equipment in a clean orderly condition and follows prescribed safety regulations.Must be familiar with the basic machine functions in order to perform the tasks stated above.Must be willing to accept and receive frequent supervision and assistance with regard to machine set-up.Team PlayerA basic understanding of addition and subtraction.Assist in other areas as neededWorking hours: 7:00 PM - 7:00 AMSkills:Effective communication, include speaking, writing, active listening and taking instructionGood leadership and training skillsQuick troubleshooting and problem-solving skillsAdvanced knowledge of following blueprints and manualsExcellent mechanical skills, including comfort with using tools to make simple repairsGreat time managementKeen attention to detail to identify maintenance, product or operations issuesAbility to stand, sit or be in other physically demanding positions for long periods of timeEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma or equivalent.Experience in a fast paced, high volume manufacturing environmentAbility to work in a team oriented environment.Must be able to work in an environment with exposure to heat/cold conditions and levels of noise, and potential exposure to various industrial liquids, oils, gases, and etc.Must be able to stand/walk for up to 10-12 hoursMeeting physical requirements, such as lifting, bending and standing for long periodsMust be able to lift up to 35 pounds with or without reasonable accommodationAdhere to quality service standards and comply with procedures, rules and regulations.Must be able to work a flexible/rotating work schedule, including weekends, holidays, and overtime (covering all shift schedules).Must be able to follow safety standards and practices. Apply now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We are seeking multiple Packaging/Machine Operators for our client in the Crestview area. They are looking to hire right away, so if this sounds like a position for you, APPLY NOW!Responsibilities:Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functionsDetects and reports defective materials or questionable conditions to the shift supervisor.Maintains the work area and equipment in a clean orderly condition and follows prescribed safety regulations.Must be familiar with the basic machine functions in order to perform the tasks stated above.Must be willing to accept and receive frequent supervision and assistance with regard to machine set-up.Team PlayerA basic understanding of addition and subtraction.Assist in other areas as neededWorking hours: 7:00 PM - 7:00 AMSkills:Effective communication, include speaking, writing, active listening and taking instructionGood leadership and training skillsQuick troubleshooting and problem-solving skillsAdvanced knowledge of following blueprints and manualsExcellent mechanical skills, including comfort with using tools to make simple repairsGreat time managementKeen attention to detail to identify maintenance, product or operations issuesAbility to stand, sit or be in other physically demanding positions for long periods of timeEducation:High SchoolExperience:0-1 yearsQualifications:High School Diploma or equivalent.Experience in a fast paced, high volume manufacturing environmentAbility to work in a team oriented environment.Must be able to work in an environment with exposure to heat/cold conditions and levels of noise, and potential exposure to various industrial liquids, oils, gases, and etc.Must be able to stand/walk for up to 10-12 hoursMeeting physical requirements, such as lifting, bending and standing for long periodsMust be able to lift up to 35 pounds with or without reasonable accommodationAdhere to quality service standards and comply with procedures, rules and regulations.Must be able to work a flexible/rotating work schedule, including weekends, holidays, and overtime (covering all shift schedules).Must be able to follow safety standards and practices. Apply now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • St Peter, Minnesota
      • Permanent
      • $70,000 - $80,000 per year
      • 5:00 PM - 3:00 AM
      We are partnering with a premiere manufacturer in St. Peter, MN to fill a Production Supervisory role. As the Production Supervisor, you will lead a team of 50 direct labor employees, to continuously improve safety, quality, and productivity, while following company core values. This position offers incredible benefits! 2nd shift hours: Monday - Thursday 5:00 p.m. - 3:30 a.m., plus 8 hours every other FridayResponsibilities:Direct and coordinate the activities of employees engaged in the production and/or handling of goods.Read and analyze charts, work orders, production schedules and other records and reports to determine production requirements and to evaluate current production estimates and outputs.Confer with other supervisors to coordinate operations and activities within or between departments.Plan and establish work schedules, assignments and production sequences to meet production goals.Ensure compliance of safety requirements.Inspect materials, products and equipment to detect defects or malfunctions.Observe work and monitor gauges, dials or other indicators to ensure that operators conform to production or processing standards.Confer with management and subordinates to resolve worker issues, complaints and/or grievances.Interpret specifications, blue prints, job orders and company policies and procedures for workers.Maintain operations data, such as time, production and cost records, and prepare management reports of production results.Recommend and/or implement measures to motivate employees and to improve production methods, equipment performance, product quality, employee safety and efficiency.Determine standards, budgets, production goals and rates, based on company policies, equipment, labor availability and workloads.Requisition materials, supplies, equipment parts and/or repair services.Set up and adjust machines and equipment.Conduct employee training on equipment operations, work, safety and quality procedures.Keep records of employee?s attendance and hours worked.Recommend and/or execute personnel actions such as hiring, evaluations, promotions and corrective actions.Working hours: 5:00 PM - 3:00 AMSkills:Excellent communication skills.Knowledge of Microsoft Office.Education:No Degree RequiredExperience:4-7 yearsQualifications:High School Diploma or GED along with a minimum of 5 years manufacturing experience.A minimum of 2 years of supervisory experience is required, either direct or indirect. DON'T WAIT, APPLY TODAY! Call Jennifer to schedule an immediate phone interview: 507-934-8259.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We are partnering with a premiere manufacturer in St. Peter, MN to fill a Production Supervisory role. As the Production Supervisor, you will lead a team of 50 direct labor employees, to continuously improve safety, quality, and productivity, while following company core values. This position offers incredible benefits! 2nd shift hours: Monday - Thursday 5:00 p.m. - 3:30 a.m., plus 8 hours every other FridayResponsibilities:Direct and coordinate the activities of employees engaged in the production and/or handling of goods.Read and analyze charts, work orders, production schedules and other records and reports to determine production requirements and to evaluate current production estimates and outputs.Confer with other supervisors to coordinate operations and activities within or between departments.Plan and establish work schedules, assignments and production sequences to meet production goals.Ensure compliance of safety requirements.Inspect materials, products and equipment to detect defects or malfunctions.Observe work and monitor gauges, dials or other indicators to ensure that operators conform to production or processing standards.Confer with management and subordinates to resolve worker issues, complaints and/or grievances.Interpret specifications, blue prints, job orders and company policies and procedures for workers.Maintain operations data, such as time, production and cost records, and prepare management reports of production results.Recommend and/or implement measures to motivate employees and to improve production methods, equipment performance, product quality, employee safety and efficiency.Determine standards, budgets, production goals and rates, based on company policies, equipment, labor availability and workloads.Requisition materials, supplies, equipment parts and/or repair services.Set up and adjust machines and equipment.Conduct employee training on equipment operations, work, safety and quality procedures.Keep records of employee?s attendance and hours worked.Recommend and/or execute personnel actions such as hiring, evaluations, promotions and corrective actions.Working hours: 5:00 PM - 3:00 AMSkills:Excellent communication skills.Knowledge of Microsoft Office.Education:No Degree RequiredExperience:4-7 yearsQualifications:High School Diploma or GED along with a minimum of 5 years manufacturing experience.A minimum of 2 years of supervisory experience is required, either direct or indirect. DON'T WAIT, APPLY TODAY! Call Jennifer to schedule an immediate phone interview: 507-934-8259.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Moncks Corner, South Carolina
      • Temp to Perm
      • $16.50 - $18.50 per hour
      • 7:00 AM - 4:00 PM (Various Shifts Available)
      As a Material Handler, you will have an important role on our team helping us provide sophisticated supply chain solutions to our customers. If you're looking for an exciting opportunity with a company that is clearly going places, join us at GXO.Responsibilities:PLEASE NOTE-THIS JOB REQUIRES THE TALENT TO HAVE THE ABILITY TO DRIVE THEMSELVES TO WORK EVERY DAY-NO CARPOOLING OR DROPOFFS ALLOWED.Working hours: 7:00 AM - 4:00 PM (Various Shifts Available)Skills:What You?ll Do On a Typical Day:Support operations by moving material and inventory throughout the facilityUse hand trucks, conveyors or other material handling equipmentPerform duties that may include packing, scanning, kitting or counting productsVerify orders, label products and use a handheld scannerAdhere to the 7S programMaintain a clean environment at all timesWork in a safe manner that protects you and your team membersEducation:High SchoolExperience:1-4 yearsQualifications:At a Minimum, You'll Need To be at least 18 years of ageThe ability to do basic math calculations, with and without a calculatorAbility to read and interpret documents such as safety rules, operating instructions and procedural documents It'd Be Great If You Also Have 1 year of experience in a warehouse environmentAvailability to work a flexible schedule, with possible overtime when neededExperience using a handheld scannerPositive attitude and the ability to work on a team to achieve goals and objectives This Job Requires The Ability ToLift objects of various shapes, sizes, and weights; lift up to 50 lbs.Stand, sit or walk for prolonged periods of timeBend, stoop, squat, twist, push and pullHandle or manage tools or equipmentTolerate hot or cold warehouse environmentsSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      As a Material Handler, you will have an important role on our team helping us provide sophisticated supply chain solutions to our customers. If you're looking for an exciting opportunity with a company that is clearly going places, join us at GXO.Responsibilities:PLEASE NOTE-THIS JOB REQUIRES THE TALENT TO HAVE THE ABILITY TO DRIVE THEMSELVES TO WORK EVERY DAY-NO CARPOOLING OR DROPOFFS ALLOWED.Working hours: 7:00 AM - 4:00 PM (Various Shifts Available)Skills:What You?ll Do On a Typical Day:Support operations by moving material and inventory throughout the facilityUse hand trucks, conveyors or other material handling equipmentPerform duties that may include packing, scanning, kitting or counting productsVerify orders, label products and use a handheld scannerAdhere to the 7S programMaintain a clean environment at all timesWork in a safe manner that protects you and your team membersEducation:High SchoolExperience:1-4 yearsQualifications:At a Minimum, You'll Need To be at least 18 years of ageThe ability to do basic math calculations, with and without a calculatorAbility to read and interpret documents such as safety rules, operating instructions and procedural documents It'd Be Great If You Also Have 1 year of experience in a warehouse environmentAvailability to work a flexible schedule, with possible overtime when neededExperience using a handheld scannerPositive attitude and the ability to work on a team to achieve goals and objectives This Job Requires The Ability ToLift objects of various shapes, sizes, and weights; lift up to 50 lbs.Stand, sit or walk for prolonged periods of timeBend, stoop, squat, twist, push and pullHandle or manage tools or equipmentTolerate hot or cold warehouse environmentsSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Conroe, Texas
      • Temp to Perm
      • $12.00 - $15.00 per hour
      • Various Shifts Available
      Spherion has partnered with a local Conroe company hiring for an Assembler position.Responsibilities:Responsible for production/assembly of small parts and assemblies meeting quality and quantity standards.Perform routine assembly operations, knowledge and use of measuring devices.Bags parts with identifying information.Ensure adherence to drawing specifications, test procedures and quality standard; Sorts and places materials or items on racks, shelves, or in bins according to predetermined sequence such as size, type, style, or product item number.Provide support and assistance to other departments as needed.Other duties as assigned.Working hours: Various Shifts AvailableSkills:Able to multi-task the activities with shifting priorities.Excellent Work Ethic.Team Player.Must be able to stand for several hours and lift up to 30 pounds 20% of the time during a normal shift.Comply with all company safety policies and procedures.Education:High SchoolExperience:0-1 yearsQualifications:Previous experience in assemblyHS Diploma or Equivalent Call or Text "APPLY" to 936/207-1150Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion has partnered with a local Conroe company hiring for an Assembler position.Responsibilities:Responsible for production/assembly of small parts and assemblies meeting quality and quantity standards.Perform routine assembly operations, knowledge and use of measuring devices.Bags parts with identifying information.Ensure adherence to drawing specifications, test procedures and quality standard; Sorts and places materials or items on racks, shelves, or in bins according to predetermined sequence such as size, type, style, or product item number.Provide support and assistance to other departments as needed.Other duties as assigned.Working hours: Various Shifts AvailableSkills:Able to multi-task the activities with shifting priorities.Excellent Work Ethic.Team Player.Must be able to stand for several hours and lift up to 30 pounds 20% of the time during a normal shift.Comply with all company safety policies and procedures.Education:High SchoolExperience:0-1 yearsQualifications:Previous experience in assemblyHS Diploma or Equivalent Call or Text "APPLY" to 936/207-1150Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Waseca, Minnesota
      • Temp to Perm
      • $16.00 per hour
      • 5:30 AM - 4:00 PM (Various Shifts Available)
      Performs a wide variety of assembly operations on assemblies or sub-assemblies. Determines and/or follows methods and sequence of operations in performing wiring, component installation, hand soldering and cable harnessing on assembly units. Makes setups and adjustments holding tolerances to blueprint specifications.Responsibilities:1.Reads work orders, follows production drawings and sample assemblies, or receives verbal instructions regarding duties to be performed2.Positions and aligns parts in specified relationships to each other in jig, fixture, or other holding device3.Crimps, stakes, screws, bolts, rivets, welds, solders, cements, press fits, or performs similar operations to join or secure parts in place4.Mounts assembled components on chassis panel5.Installs finished assemblies or subassemblies in cases or cabinets6.Performs online go-not-go testing and inspection to ensure parts and assemblies meet production specifications and standards7.Assembles and attaches hardware, such as caps, champs, knobs, and switches to assemblies8.Connects component lead wires to printed circuit or routes and connects wires between individual component leads and other components, connectors, terminals, and contact points9.Performs intermediate assembly tasks such as potting, encapsulating, sanding, cleaning, epoxy bonding, curing, stamping, etching, impregnating, and color-coding parts and assemblies10.Meets attendance requirements and is consistently at work on timeWorking hours: 5:30 AM - 4:00 PM (Various Shifts Available)Skills:Adaptability - Adapts to change quickly, is open to new ideas, takes on new responsibilities, handles pressure, adjusts plans to meet changing needs, direction and new challenges.Dependability - Meets commitments, works independently, accepts accountability, handles change, sets personal standards, stays focused under pressure, meets attendance/punctuality requirements.Knowledge - Understands and exhibits a working knowledge of own duties and responsibilities, has necessary job, product and customer knowledge, has necessary technical skills, understands company mission/values, keeps job knowledge current, is in command of critical issues.Quality --Is attentive to detail and accuracy, is committed to excellence, looks for improvements continuously, monitors quality levels, finds root cause of problems, owns/acts on quality problems.TeamworkEducation:No Degree RequiredExperience:0-1 yearsQualifications:Meets all team deadlines and responsibilities, listens to others and values opinions, shares knowledge, helps co-workers to meet goals, makes the most of individual strengths, welcomes newcomers, promotes a team atmosphere, and actively seeks out perspectives different from your own to get to the best solutions. Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Performs a wide variety of assembly operations on assemblies or sub-assemblies. Determines and/or follows methods and sequence of operations in performing wiring, component installation, hand soldering and cable harnessing on assembly units. Makes setups and adjustments holding tolerances to blueprint specifications.Responsibilities:1.Reads work orders, follows production drawings and sample assemblies, or receives verbal instructions regarding duties to be performed2.Positions and aligns parts in specified relationships to each other in jig, fixture, or other holding device3.Crimps, stakes, screws, bolts, rivets, welds, solders, cements, press fits, or performs similar operations to join or secure parts in place4.Mounts assembled components on chassis panel5.Installs finished assemblies or subassemblies in cases or cabinets6.Performs online go-not-go testing and inspection to ensure parts and assemblies meet production specifications and standards7.Assembles and attaches hardware, such as caps, champs, knobs, and switches to assemblies8.Connects component lead wires to printed circuit or routes and connects wires between individual component leads and other components, connectors, terminals, and contact points9.Performs intermediate assembly tasks such as potting, encapsulating, sanding, cleaning, epoxy bonding, curing, stamping, etching, impregnating, and color-coding parts and assemblies10.Meets attendance requirements and is consistently at work on timeWorking hours: 5:30 AM - 4:00 PM (Various Shifts Available)Skills:Adaptability - Adapts to change quickly, is open to new ideas, takes on new responsibilities, handles pressure, adjusts plans to meet changing needs, direction and new challenges.Dependability - Meets commitments, works independently, accepts accountability, handles change, sets personal standards, stays focused under pressure, meets attendance/punctuality requirements.Knowledge - Understands and exhibits a working knowledge of own duties and responsibilities, has necessary job, product and customer knowledge, has necessary technical skills, understands company mission/values, keeps job knowledge current, is in command of critical issues.Quality --Is attentive to detail and accuracy, is committed to excellence, looks for improvements continuously, monitors quality levels, finds root cause of problems, owns/acts on quality problems.TeamworkEducation:No Degree RequiredExperience:0-1 yearsQualifications:Meets all team deadlines and responsibilities, listens to others and values opinions, shares knowledge, helps co-workers to meet goals, makes the most of individual strengths, welcomes newcomers, promotes a team atmosphere, and actively seeks out perspectives different from your own to get to the best solutions. Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Alachua, Florida
      • Temp to Perm
      • $16.00 - $19.00 per hour
      • 6:00 AM - 11:00 PM (Various Shifts Available)
      Spherion Gainesville, FL has a client looking for Industrial Assemblers for their Alachua, FL location. You will be performing electrical assembly in a production environment where you'll be assembling large and heavy parts to complete subassemblies and drilling rigs using hand tools, power tools, and other specialized equipment. Let's get to work. Possible temp to hire position Alachua, FLSchedule: FT, M-F, 6a - 3pm or 3p - 11p Salary: $16 - $19 depending on shift Please email resumes to Rose Crane - rosecrane@spherion.comResponsibilities:- Perform a variety of assembly operations including electrical, welding, and mechanical- Review specifications to determine assembly and special options- Check bins for adequate supplies- Ensures connections for correct fit, parts, and sub-assemblies per specifications- Maintains a clean and safe work environment- Other duties as assignedWorking hours: 6:00 AM - 11:00 PM (Various Shifts Available)Skills:- Excellent troubleshooting skills - Knowledge of basic hand tools- Ability to lift up to 50 lbsEducation:High SchoolExperience:0-1 yearsQualifications:- High school or GED preferred- Prior assembly experience highly preferred Are you ready to start your next career? Please click here https://www.spherion.com/apply/75796/ to apply or call 352-378-2300 to inquire about our job opportunities.We offer Medical, Dental, 401(k) and bonuses! We pay weekly!Spherion Gainesville, FL is a drug free workplace.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Gainesville, FL has a client looking for Industrial Assemblers for their Alachua, FL location. You will be performing electrical assembly in a production environment where you'll be assembling large and heavy parts to complete subassemblies and drilling rigs using hand tools, power tools, and other specialized equipment. Let's get to work. Possible temp to hire position Alachua, FLSchedule: FT, M-F, 6a - 3pm or 3p - 11p Salary: $16 - $19 depending on shift Please email resumes to Rose Crane - rosecrane@spherion.comResponsibilities:- Perform a variety of assembly operations including electrical, welding, and mechanical- Review specifications to determine assembly and special options- Check bins for adequate supplies- Ensures connections for correct fit, parts, and sub-assemblies per specifications- Maintains a clean and safe work environment- Other duties as assignedWorking hours: 6:00 AM - 11:00 PM (Various Shifts Available)Skills:- Excellent troubleshooting skills - Knowledge of basic hand tools- Ability to lift up to 50 lbsEducation:High SchoolExperience:0-1 yearsQualifications:- High school or GED preferred- Prior assembly experience highly preferred Are you ready to start your next career? Please click here https://www.spherion.com/apply/75796/ to apply or call 352-378-2300 to inquire about our job opportunities.We offer Medical, Dental, 401(k) and bonuses! We pay weekly!Spherion Gainesville, FL is a drug free workplace.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Permanent
      • $21.68 per hour
      • 2:00 PM - 10:00 PM
      We have another great Direct Hire Opportunity with a fabulous manufacturer in Mankato that offer! Don't miss out on this one and APPLY TODAY for this rare opportunity with a leader in the foundry industry. Our success is based on strong core values and commitment to exceed customer's expectations. We are seeking team oriented people for several production jobs. Ideal candidates will have a strong stable work background and computer skills, be mechanically inclined and interested in getting trained in a variety of jobs in our company.Typical hours will be Monday - Friday, 2nd shift from 2:00 p.m. - 10:00 p.m., OT as neededPay: $21.68 an hour plus BENEFITSResponsibilities:ESSENTIAL FUNCTIONS: Follow all safety rules and Personal Protective Equipment (PPE) requirements Assure that work practices are in the guidelines of OSHA standards Assure that the weekly production schedule is completed on time Work with team members to maximize productivity and efficiency Assure that all products are made to the highest standard of quality Operate machinery used in the production process Examine products to verify conformance to quality standards Observe equipment operations so that malfunctions can be detected, and notify operations of any malfunctions Lift raw materials, finished products, and packed items, manually or using hoists Load and unload items from machines, conveyors, and conveyances Help production workers by performing duties of varying skill, such as supplying or holding materials or tools, and cleaning work areas and equipment Record information such as the number of products tested, readings, and dates and times of product productionKeep work areas and equipment clean and organized ? Start machines or equipment in order to begin production processes Separate products according to weight, grade, size, and composition of materials used to produce them Offer suggestions for improvements of operations or processes Place products in equipment or on work surfaces for further processing, inspecting, or wrapping Remove products, machine attachments, and waste material from machines Transfer finished products, raw materials, tools, or equipment between storage and work areas of plants and warehouses, by hand or using hand trucks or powered lift trucks Read gauges and charts, and record data obtained ? Mix ingredients according to specified procedures and formulasWorking hours: 2:00 PM - 10:00 PMSkills:POSITION QUALIFICATIONS - Safety Awareness - Ability to identify and correct conditions that affect employee safety - Accountability - Ability to accept responsibility and account for his/her actions - Accuracy - Ability to perform work accurately and thoroughly - Self Motivated - Ability to be internally inspired to perform a task to the best of ones ability using his or her own drive or initiative - Adaptability - Ability to adapt to change in the workplace - Ambition - The drive to achieve personal advancement - Goal Oriented - Ability to focus on a goal and obtain a pre-determined result - Applied Learning - Ability to participate in needed learning activities in a way that makes the most of the learning experience - Interpersonal - Ability to get along well with a variety of personalities and individuals - Customer Oriented - Ability to take care of the customers' needs while following company procedures - Communication, Oral - Ability to communicate effectively with others using the spoken word - Detail Oriented - Ability to pay attention to the minute details of a project or task. - Innovative - Ability to look beyond the standard solutions - Problem Solving - Ability to find a solution for or to deal proactively with work-related problems - Working Under Pressure - Ability to complete assigned tasks under stressful situations - Honesty / Integrity - Ability to be truthful a
      We have another great Direct Hire Opportunity with a fabulous manufacturer in Mankato that offer! Don't miss out on this one and APPLY TODAY for this rare opportunity with a leader in the foundry industry. Our success is based on strong core values and commitment to exceed customer's expectations. We are seeking team oriented people for several production jobs. Ideal candidates will have a strong stable work background and computer skills, be mechanically inclined and interested in getting trained in a variety of jobs in our company.Typical hours will be Monday - Friday, 2nd shift from 2:00 p.m. - 10:00 p.m., OT as neededPay: $21.68 an hour plus BENEFITSResponsibilities:ESSENTIAL FUNCTIONS: Follow all safety rules and Personal Protective Equipment (PPE) requirements Assure that work practices are in the guidelines of OSHA standards Assure that the weekly production schedule is completed on time Work with team members to maximize productivity and efficiency Assure that all products are made to the highest standard of quality Operate machinery used in the production process Examine products to verify conformance to quality standards Observe equipment operations so that malfunctions can be detected, and notify operations of any malfunctions Lift raw materials, finished products, and packed items, manually or using hoists Load and unload items from machines, conveyors, and conveyances Help production workers by performing duties of varying skill, such as supplying or holding materials or tools, and cleaning work areas and equipment Record information such as the number of products tested, readings, and dates and times of product productionKeep work areas and equipment clean and organized ? Start machines or equipment in order to begin production processes Separate products according to weight, grade, size, and composition of materials used to produce them Offer suggestions for improvements of operations or processes Place products in equipment or on work surfaces for further processing, inspecting, or wrapping Remove products, machine attachments, and waste material from machines Transfer finished products, raw materials, tools, or equipment between storage and work areas of plants and warehouses, by hand or using hand trucks or powered lift trucks Read gauges and charts, and record data obtained ? Mix ingredients according to specified procedures and formulasWorking hours: 2:00 PM - 10:00 PMSkills:POSITION QUALIFICATIONS - Safety Awareness - Ability to identify and correct conditions that affect employee safety - Accountability - Ability to accept responsibility and account for his/her actions - Accuracy - Ability to perform work accurately and thoroughly - Self Motivated - Ability to be internally inspired to perform a task to the best of ones ability using his or her own drive or initiative - Adaptability - Ability to adapt to change in the workplace - Ambition - The drive to achieve personal advancement - Goal Oriented - Ability to focus on a goal and obtain a pre-determined result - Applied Learning - Ability to participate in needed learning activities in a way that makes the most of the learning experience - Interpersonal - Ability to get along well with a variety of personalities and individuals - Customer Oriented - Ability to take care of the customers' needs while following company procedures - Communication, Oral - Ability to communicate effectively with others using the spoken word - Detail Oriented - Ability to pay attention to the minute details of a project or task. - Innovative - Ability to look beyond the standard solutions - Problem Solving - Ability to find a solution for or to deal proactively with work-related problems - Working Under Pressure - Ability to complete assigned tasks under stressful situations - Honesty / Integrity - Ability to be truthful a
      • Champaign, Illinois
      • Temporary
      • $20.00 - $25.00 per hour
      • 5:45 PM - 6:00 AM
      Great full-time opportunity if you're seeking a long-term career and have the flexiblity to work a set rotation schedule...Plan and perform maintenance operations requiring skill and experience in different areas of facility maintenance such as electrical circuitry, HVAC, carpentry, painting or construction. Maintain, modify or repair production machinery and building. Use a variety of machine, hand tools and measuring instruments. Use blueprints and schematics. Responsible for equipment, tools and operations.Responsibilities:Preventative maintenance of assigned equipment according to procedures and work instructions.Communicate with Team Leaders, Quality Assurance Technicians, Packers, Molders, ST Technicians, and Printer Technicians.Ensure product is being produced that meets quality requirements on assigned equipment. Observe safety and security procedures; report potentially unsafe conditions; use equipment and materials properly. Clean-up of production area and machinery.Monitor and maintain material supply functions.Help in other job functions as required.Observe safety and security procedures; report potentially unsafe conditions; use equipment and materials properly.Comply with Good Manufacturing Practices (GMP), Food Safety and HACCP Pre-requisite Programs related to activities performed for this position.Working hours: 5:45 PM - 6:00 AMSkills:3 Years industrial plant maintenance experience.Education:High SchoolExperience:4-7 yearsQualifications:High school Diploma or G.E.D.Documented demonstration of knowledge and performance of the job to the satisfaction of the Maintenance Manager.Exemplary attendance (weekly incentive provided). Go to www.spherion.com/apply/75102 to register and complete an online application or call (217) 359-4488Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Great full-time opportunity if you're seeking a long-term career and have the flexiblity to work a set rotation schedule...Plan and perform maintenance operations requiring skill and experience in different areas of facility maintenance such as electrical circuitry, HVAC, carpentry, painting or construction. Maintain, modify or repair production machinery and building. Use a variety of machine, hand tools and measuring instruments. Use blueprints and schematics. Responsible for equipment, tools and operations.Responsibilities:Preventative maintenance of assigned equipment according to procedures and work instructions.Communicate with Team Leaders, Quality Assurance Technicians, Packers, Molders, ST Technicians, and Printer Technicians.Ensure product is being produced that meets quality requirements on assigned equipment. Observe safety and security procedures; report potentially unsafe conditions; use equipment and materials properly. Clean-up of production area and machinery.Monitor and maintain material supply functions.Help in other job functions as required.Observe safety and security procedures; report potentially unsafe conditions; use equipment and materials properly.Comply with Good Manufacturing Practices (GMP), Food Safety and HACCP Pre-requisite Programs related to activities performed for this position.Working hours: 5:45 PM - 6:00 AMSkills:3 Years industrial plant maintenance experience.Education:High SchoolExperience:4-7 yearsQualifications:High school Diploma or G.E.D.Documented demonstration of knowledge and performance of the job to the satisfaction of the Maintenance Manager.Exemplary attendance (weekly incentive provided). Go to www.spherion.com/apply/75102 to register and complete an online application or call (217) 359-4488Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Permanent
      • $21.68 per hour
      • 10:00 PM - 6:00 AM
      GREAT PAY and BENEFITS with a GREAT COMPANY! DIRECT HIRE PRODUCTION POSITIONS now available with a leader in the foundry industry. Our success is based on strong core values and commitment to exceed customer's expectations. We are seeking team oriented people for several production jobs. Ideal candidates will have a strong stable work background and computer skills, be mechanically inclined and interested in getting trained in a variety of jobs in our company.Typical hours will be Sunday - Thursday, 3rd shift from 10:00 p.m. - 6:00 a.m., OT as neededResponsibilities:ESSENTIAL FUNCTIONS: Follow all safety rules and Personal Protective Equipment (PPE) requirements Assure that work practices are in the guidelines of OSHA standards Assure that the weekly production schedule is completed on time Work with team members to maximize productivity and efficiency Assure that all products are made to the highest standard of quality Operate machinery used in the production process Examine products to verify conformance to quality standards Observe equipment operations so that malfunctions can be detected, and notify operations of any malfunctions Lift raw materials, finished products, and packed items, manually or using hoists Load and unload items from machines, conveyors, and conveyances Help production workers by performing duties of varying skill, such as supplying or holding materials or tools, and cleaning work areas and equipment Record information such as the number of products tested, readings, and dates and times of product productionKeep work areas and equipment clean and organized ? Start machines or equipment in order to begin production processes Separate products according to weight, grade, size, and composition of materials used to produce them Offer suggestions for improvements of operations or processes Place products in equipment or on work surfaces for further processing, inspecting, or wrapping Remove products, machine attachments, and waste material from machines Transfer finished products, raw materials, tools, or equipment between storage and work areas of plants and warehouses, by hand or using hand trucks or powered lift trucks Read gauges and charts, and record data obtained ? Mix ingredients according to specified procedures and formulasWorking hours: 10:00 PM - 6:00 AMSkills:POSITION QUALIFICATIONS - Safety Awareness - Ability to identify and correct conditions that affect employee safety - Accountability - Ability to accept responsibility and account for his/her actions - Accuracy - Ability to perform work accurately and thoroughly - Self Motivated - Ability to be internally inspired to perform a task to the best of ones ability using his or her own drive or initiative - Adaptability - Ability to adapt to change in the workplace - Ambition - The drive to achieve personal advancement - Goal Oriented - Ability to focus on a goal and obtain a pre-determined result - Applied Learning - Ability to participate in needed learning activities in a way that makes the most of the learning experience - Interpersonal - Ability to get along well with a variety of personalities and individuals - Customer Oriented - Ability to take care of the customers' needs while following company procedures - Communication, Oral - Ability to communicate effectively with others using the spoken word - Detail Oriented - Ability to pay attention to the minute details of a project or task. - Innovative - Ability to look beyond the standard solutions - Problem Solving - Ability to find a solution for or to deal proactively with work-related problems - Working Under Pressure - Ability to complete assigned tasks under stressful situations - Honesty / Integrity - Ability to be truthful and be seen as credible in the workplaceEducation:High SchoolExperience:0-1 years<
      GREAT PAY and BENEFITS with a GREAT COMPANY! DIRECT HIRE PRODUCTION POSITIONS now available with a leader in the foundry industry. Our success is based on strong core values and commitment to exceed customer's expectations. We are seeking team oriented people for several production jobs. Ideal candidates will have a strong stable work background and computer skills, be mechanically inclined and interested in getting trained in a variety of jobs in our company.Typical hours will be Sunday - Thursday, 3rd shift from 10:00 p.m. - 6:00 a.m., OT as neededResponsibilities:ESSENTIAL FUNCTIONS: Follow all safety rules and Personal Protective Equipment (PPE) requirements Assure that work practices are in the guidelines of OSHA standards Assure that the weekly production schedule is completed on time Work with team members to maximize productivity and efficiency Assure that all products are made to the highest standard of quality Operate machinery used in the production process Examine products to verify conformance to quality standards Observe equipment operations so that malfunctions can be detected, and notify operations of any malfunctions Lift raw materials, finished products, and packed items, manually or using hoists Load and unload items from machines, conveyors, and conveyances Help production workers by performing duties of varying skill, such as supplying or holding materials or tools, and cleaning work areas and equipment Record information such as the number of products tested, readings, and dates and times of product productionKeep work areas and equipment clean and organized ? Start machines or equipment in order to begin production processes Separate products according to weight, grade, size, and composition of materials used to produce them Offer suggestions for improvements of operations or processes Place products in equipment or on work surfaces for further processing, inspecting, or wrapping Remove products, machine attachments, and waste material from machines Transfer finished products, raw materials, tools, or equipment between storage and work areas of plants and warehouses, by hand or using hand trucks or powered lift trucks Read gauges and charts, and record data obtained ? Mix ingredients according to specified procedures and formulasWorking hours: 10:00 PM - 6:00 AMSkills:POSITION QUALIFICATIONS - Safety Awareness - Ability to identify and correct conditions that affect employee safety - Accountability - Ability to accept responsibility and account for his/her actions - Accuracy - Ability to perform work accurately and thoroughly - Self Motivated - Ability to be internally inspired to perform a task to the best of ones ability using his or her own drive or initiative - Adaptability - Ability to adapt to change in the workplace - Ambition - The drive to achieve personal advancement - Goal Oriented - Ability to focus on a goal and obtain a pre-determined result - Applied Learning - Ability to participate in needed learning activities in a way that makes the most of the learning experience - Interpersonal - Ability to get along well with a variety of personalities and individuals - Customer Oriented - Ability to take care of the customers' needs while following company procedures - Communication, Oral - Ability to communicate effectively with others using the spoken word - Detail Oriented - Ability to pay attention to the minute details of a project or task. - Innovative - Ability to look beyond the standard solutions - Problem Solving - Ability to find a solution for or to deal proactively with work-related problems - Working Under Pressure - Ability to complete assigned tasks under stressful situations - Honesty / Integrity - Ability to be truthful and be seen as credible in the workplaceEducation:High SchoolExperience:0-1 years<
      • Fargo, North Dakota
      • Permanent
      • $70,000 - $80,000 per year
      • Various Shifts Available
      Safety Manager to provide safety and health leadership and expertise to the operations within 7 facilities in food processing/manufacturing environment. The Safety Manager works with the safety committee and operational leaders to serve and support the plants with the implementation and maintenance of safety policies and training programs that reinforce our "safety first" culture by continuously improving our ability to prevent serious events, injuries, and fatalities, and ensuring compliance with applicable regulations.Salary $70-80k/year DOEDirect Hire OpportunityResponsibilities:- Provide technical support and professional expertise to the plant safety committees and operations leadership- Perform plant level compliance audits of implemented safety policies, to identify compliance issue and improvement opportunities- Monitor corrective actions progress and ensure closure of high-risk items identified through audits, incidents or near misses- Support creation of health, safety and environmental (HSE) goals and KPI reporting systems - Implement programs to train managers and employees in worksite safety practices Evaluate practices, procedures and facilities to assess risk and adherence to the law- Recommend solutions to issues, improvement opportunities or new prevention measures- Lead investigations and root cause analysis of serious events. Investigate accidents or incidents to discover causes- Represent the organization in meetings with industry safety groups and programs- Coordinate all aspects of workers' compensation claims- Maintain DOT compliance, including DQ files, drug testing, reasonable suspicion training, other DOT required training & DOT auditsResponsibilities:See aboveWorking hours: Various Shifts AvailableSkills:Requirements:-Bachelor's degree in Safety/Environmental field or equivalent work experience-2 or more years of manufacturing safety experience or related food/agribusiness experience-Must have a comprehensive knowledge of OSHA regulations-OSHA 10 hour safety certified-Demonstrated success in the application of safety standards, compliance with safety regulations, and the promotion of a safe working environment-Strong interpersonal skills with the ability to communicate at all levels of the organization-Strong facilitation/presentation skills with the ability to influence others-Experience working with multiple sites-Ability and willingness to travel up to 25% on a monthly basis to support facility programs (about 1 wk/mo)Education:BachelorsExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Michael Smith at 701-412-2914Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Safety Manager to provide safety and health leadership and expertise to the operations within 7 facilities in food processing/manufacturing environment. The Safety Manager works with the safety committee and operational leaders to serve and support the plants with the implementation and maintenance of safety policies and training programs that reinforce our "safety first" culture by continuously improving our ability to prevent serious events, injuries, and fatalities, and ensuring compliance with applicable regulations.Salary $70-80k/year DOEDirect Hire OpportunityResponsibilities:- Provide technical support and professional expertise to the plant safety committees and operations leadership- Perform plant level compliance audits of implemented safety policies, to identify compliance issue and improvement opportunities- Monitor corrective actions progress and ensure closure of high-risk items identified through audits, incidents or near misses- Support creation of health, safety and environmental (HSE) goals and KPI reporting systems - Implement programs to train managers and employees in worksite safety practices Evaluate practices, procedures and facilities to assess risk and adherence to the law- Recommend solutions to issues, improvement opportunities or new prevention measures- Lead investigations and root cause analysis of serious events. Investigate accidents or incidents to discover causes- Represent the organization in meetings with industry safety groups and programs- Coordinate all aspects of workers' compensation claims- Maintain DOT compliance, including DQ files, drug testing, reasonable suspicion training, other DOT required training & DOT auditsResponsibilities:See aboveWorking hours: Various Shifts AvailableSkills:Requirements:-Bachelor's degree in Safety/Environmental field or equivalent work experience-2 or more years of manufacturing safety experience or related food/agribusiness experience-Must have a comprehensive knowledge of OSHA regulations-OSHA 10 hour safety certified-Demonstrated success in the application of safety standards, compliance with safety regulations, and the promotion of a safe working environment-Strong interpersonal skills with the ability to communicate at all levels of the organization-Strong facilitation/presentation skills with the ability to influence others-Experience working with multiple sites-Ability and willingness to travel up to 25% on a monthly basis to support facility programs (about 1 wk/mo)Education:BachelorsExperience:1-4 yearsQualifications:See above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Michael Smith at 701-412-2914Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mt Pleasant, Pennsylvania
      • Temp to Perm
      • $14.50 per hour
      • 6pm to 6am on a 2,2,3 schedule
      Work on one packaging station to finish and pack product. Packaging associates move through the following operations on a regular basis: Slitting and splicing ribbons and attaching take up core. Banding and packaging TTR and hand packaging rolls in a carton and a box  Operate production machines and complete all required duties. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Overnight 12 hour shifts on a 2, 2, 3 schedule. Work only 14 days per month.  The employee is occasionally required to walk.  The employee must constantly grasp, lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. 
      Work on one packaging station to finish and pack product. Packaging associates move through the following operations on a regular basis: Slitting and splicing ribbons and attaching take up core. Banding and packaging TTR and hand packaging rolls in a carton and a box  Operate production machines and complete all required duties. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Overnight 12 hour shifts on a 2, 2, 3 schedule. Work only 14 days per month.  The employee is occasionally required to walk.  The employee must constantly grasp, lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. 
      • Williamsport, Pennsylvania
      • Temporary
      • 2pm to 1030pm or 10pm to 630am
      We are hiring for machine operators in Williamsport. Person would be operating the machines within the Injection Molding Department as well as auxiliary machines. The operator visually inspects each piece and packs the finished pieces according to specifications. 
      We are hiring for machine operators in Williamsport. Person would be operating the machines within the Injection Molding Department as well as auxiliary machines. The operator visually inspects each piece and packs the finished pieces according to specifications. 
      • Sidney, Ohio
      • Temp to Perm
      • $16.00 - $17.50 per hour
      • 40
      Spherion of Sidney, OH is looking for full-time Machine Operators for America’s leading manufacturer of RV gas/electric absorption refrigerators since 1959. Earn up to $17.50 an hour. Responsibilities: May tend machines, such as, CNC, Robo, Rotary, to perform force fitting, molding, shearing or fastening operations on assembly line. May perform minor preventative maintenance tasks as appropriate and assigned. Demonstrates accuracy and thoroughness, looks for ways to improve and promote quality, applies feedback to improve performance and monitors own work to ensure quality. Requirements & Qualifications: GED/ HS Diploma 2+ years of machine operation experience Compensation & Benefits: Earn $16.00 - $17.50 an hour 3rd shift Temp-to-hire after 520 hours   Spherion offers ACA compliant health insurance once you start working! For additional details, please ask during your orientation with us!! Apply today by filling out our online 'Apply Now' application at ApplyOhio.com and then calling the Spherion of Sidney office at (937) 419-4200!
      Spherion of Sidney, OH is looking for full-time Machine Operators for America’s leading manufacturer of RV gas/electric absorption refrigerators since 1959. Earn up to $17.50 an hour. Responsibilities: May tend machines, such as, CNC, Robo, Rotary, to perform force fitting, molding, shearing or fastening operations on assembly line. May perform minor preventative maintenance tasks as appropriate and assigned. Demonstrates accuracy and thoroughness, looks for ways to improve and promote quality, applies feedback to improve performance and monitors own work to ensure quality. Requirements & Qualifications: GED/ HS Diploma 2+ years of machine operation experience Compensation & Benefits: Earn $16.00 - $17.50 an hour 3rd shift Temp-to-hire after 520 hours   Spherion offers ACA compliant health insurance once you start working! For additional details, please ask during your orientation with us!! Apply today by filling out our online 'Apply Now' application at ApplyOhio.com and then calling the Spherion of Sidney office at (937) 419-4200!
      • South Burlington, Vermont
      • Temp to Perm
      • $21.00 per hour
      • 6:00 PM - 6:00 AM
      We're hiring for Production Technicians for a local manufacturer in Williston, VT and Essex, VT!Sign on bonuses, pay increases, 401K, paid vacations/holidays, and health insurance available after full time hire!Shift:Friday-Sunday, every other Thursday6:00pm - 6:15amIf you're looking to start a new career with a growing company with attractive starting rates and benefits, this is the job for you.Responsibilities:Operating manufacturing equipment and maintaining compliance with high standards for safety and quality.Load and unload equipment with raw materials.Actively engaged in learning machine operations and apply learnings to perform work to standard.Complete changeovers and cleans, including line clearance & pre-checks, following standard work.Comply with all safety policies and procedures and demonstrate safe behaviors at all times.Quality check final product.Working hours: 6:00 PM - 6:00 AMSkills:Must be able to lift up to 40 lbs.Must be able to stand for full shift.Reliability is a must.Previous manufacturing experience a plus, but not required! We have training programs set in place to ensure your success.Education:No Degree RequiredExperience:0-1 yearsQualifications:Background check requiredSteel toe footwear Call or text "COFFEE" to 802-864-5900 to start same week!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We're hiring for Production Technicians for a local manufacturer in Williston, VT and Essex, VT!Sign on bonuses, pay increases, 401K, paid vacations/holidays, and health insurance available after full time hire!Shift:Friday-Sunday, every other Thursday6:00pm - 6:15amIf you're looking to start a new career with a growing company with attractive starting rates and benefits, this is the job for you.Responsibilities:Operating manufacturing equipment and maintaining compliance with high standards for safety and quality.Load and unload equipment with raw materials.Actively engaged in learning machine operations and apply learnings to perform work to standard.Complete changeovers and cleans, including line clearance & pre-checks, following standard work.Comply with all safety policies and procedures and demonstrate safe behaviors at all times.Quality check final product.Working hours: 6:00 PM - 6:00 AMSkills:Must be able to lift up to 40 lbs.Must be able to stand for full shift.Reliability is a must.Previous manufacturing experience a plus, but not required! We have training programs set in place to ensure your success.Education:No Degree RequiredExperience:0-1 yearsQualifications:Background check requiredSteel toe footwear Call or text "COFFEE" to 802-864-5900 to start same week!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Moncks Corner, South Carolina
      • Temp to Perm
      • $24.00 - $30.00 per hour
      • 11:00 PM - 7:30 AM
      The Operations Supervisor is responsible to the Operations Managers to efficiently control productivity through direct supervision of warehouse and packaging associates in the Distribution CenterSummary of essential job functionsThis job includes the following duties and any other as assigned by current manager:- To ensure Total Customer Satisfaction- Ensure all safety rules and regulations are continually observed and followed. Responsible for continued safety inspections and awareness.- Supervise the receiving, shipping, and miscellaneous work to be performed for assigned customers.- Schedule the work while in process, taking responsibility for quality and efficiency.- Train and cross-train all hourly associates in all warehouse and packaging functions of assigned customers.- Assist with the applicant interviewing process.- Communicate company policies, procedures, and methods to associates as required.- Maintain Quantix standards of housekeeping inside and outside of the warehouse.- Investigate any unsafe or unsanitary conditions and initiate corrective action immediately.- Maintain security discipline; ensure daily check of the facility when closing.- Conduct performance reviews for subordinates and conduct communication sessions for hourly associates.- Responsible for any other duties or tasks as assigned by Management and to take direction from Management at all times.Responsibilities:In the performance of their respective tasks and duties all employees are expected to conform to the following:? Perform quality work within deadlines with or without direct supervision.? Interact professionally with other employees, customers and suppliers.? Work effectively as a team contributor on all assignments.? Support the efforts of management in meeting profit and growth objectives as established in the strategic business plan.? Work independently while understanding the necessity for communicating and coordinating work efforts with other employees and the organizations.? Work safely, within the company guidelines, standard operating procedures (SOP) and Job Safety Analysis (JSA).Working hours: 11:00 PM - 7:30 AMSkills:Leadership, organization, detail oriented, safety aware, can think ahead, coordinating with other departmentsEducation:High SchoolExperience:1-4 yearsQualifications:Minimum requirements? High School Degree or Associates preferred.? Warehouse experience all aspects from physical to tracking & documentation? Knowledge of all aspects of product handling processes & equipment? Knowledge of safe working practices in an industrial area? Extreme Mechanical aptitude is needed to monitor work processes for safety / production & preventative maintenance.? Must be skilled in Excel , WORD and Outlook .? Should have all certifications internally of training on equipment managed.DisclaimerThe above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Please apply with your resumeSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Or
      The Operations Supervisor is responsible to the Operations Managers to efficiently control productivity through direct supervision of warehouse and packaging associates in the Distribution CenterSummary of essential job functionsThis job includes the following duties and any other as assigned by current manager:- To ensure Total Customer Satisfaction- Ensure all safety rules and regulations are continually observed and followed. Responsible for continued safety inspections and awareness.- Supervise the receiving, shipping, and miscellaneous work to be performed for assigned customers.- Schedule the work while in process, taking responsibility for quality and efficiency.- Train and cross-train all hourly associates in all warehouse and packaging functions of assigned customers.- Assist with the applicant interviewing process.- Communicate company policies, procedures, and methods to associates as required.- Maintain Quantix standards of housekeeping inside and outside of the warehouse.- Investigate any unsafe or unsanitary conditions and initiate corrective action immediately.- Maintain security discipline; ensure daily check of the facility when closing.- Conduct performance reviews for subordinates and conduct communication sessions for hourly associates.- Responsible for any other duties or tasks as assigned by Management and to take direction from Management at all times.Responsibilities:In the performance of their respective tasks and duties all employees are expected to conform to the following:? Perform quality work within deadlines with or without direct supervision.? Interact professionally with other employees, customers and suppliers.? Work effectively as a team contributor on all assignments.? Support the efforts of management in meeting profit and growth objectives as established in the strategic business plan.? Work independently while understanding the necessity for communicating and coordinating work efforts with other employees and the organizations.? Work safely, within the company guidelines, standard operating procedures (SOP) and Job Safety Analysis (JSA).Working hours: 11:00 PM - 7:30 AMSkills:Leadership, organization, detail oriented, safety aware, can think ahead, coordinating with other departmentsEducation:High SchoolExperience:1-4 yearsQualifications:Minimum requirements? High School Degree or Associates preferred.? Warehouse experience all aspects from physical to tracking & documentation? Knowledge of all aspects of product handling processes & equipment? Knowledge of safe working practices in an industrial area? Extreme Mechanical aptitude is needed to monitor work processes for safety / production & preventative maintenance.? Must be skilled in Excel , WORD and Outlook .? Should have all certifications internally of training on equipment managed.DisclaimerThe above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Please apply with your resumeSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Or
      • Owatonna, Minnesota
      • Temporary
      • $16.00 per hour
      • 3:30 PM - 2:00 AM
      As a light Assembler, you will assemble and test high-quality products including, plastic components which meet customer and design engineering specifications.Responsibilities:Assure high-quality products through product testing including complex electronic devices.Perform setup operations for assembly.Safely operate tools and test equipment.Accurately report completion of production and complete required documentation.Respond to changes in the production schedule by prioritizing work to ensure customer and departmental requirements are met.Actively participate and support continuous improvement initiatives, utilizing established methodologies.Follow and continually monitor established safety procedures in order to promote a safe, clean work environment.Working hours: 3:30 PM - 2:00 AMSkills:Must have a good verbal and written understanding of the English languageBasic math skills including percentages, and ability to count accuratelyQuality oriented with ability to perform detailed, repetitive tasksStrong fine motor skillsAbility to work overtime including weekends and alter hours as necessaryEducation:High SchoolExperience:0-1 yearsQualifications:Minimum of a High School Degree or equivalent experience requiredSolder training preferred Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      As a light Assembler, you will assemble and test high-quality products including, plastic components which meet customer and design engineering specifications.Responsibilities:Assure high-quality products through product testing including complex electronic devices.Perform setup operations for assembly.Safely operate tools and test equipment.Accurately report completion of production and complete required documentation.Respond to changes in the production schedule by prioritizing work to ensure customer and departmental requirements are met.Actively participate and support continuous improvement initiatives, utilizing established methodologies.Follow and continually monitor established safety procedures in order to promote a safe, clean work environment.Working hours: 3:30 PM - 2:00 AMSkills:Must have a good verbal and written understanding of the English languageBasic math skills including percentages, and ability to count accuratelyQuality oriented with ability to perform detailed, repetitive tasksStrong fine motor skillsAbility to work overtime including weekends and alter hours as necessaryEducation:High SchoolExperience:0-1 yearsQualifications:Minimum of a High School Degree or equivalent experience requiredSolder training preferred Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $18.00 per hour
      • 3:00 PM - 1:15 AM
      Set-up and operate numerically controlled machine tools with single and/or multiple spindles in a safe manner. Monitor and control the quality of machining processes by utilizing process control tools such as; control charts and statistical process controls. Maintain the production processes and work within the expected efficiencies that are established for the product.Responsibilities:?Read blueprints, drawings, specifications and shop orders for all manufactured parts. i.e., dimensions, tolerances, inspection, number of parts to be machined and tooling instructions such as; cutting speeds, feed rates, depth of cuts, and cutting tools required.?Use machine controls to cycle machine through; production operations, set-up, adjusting tool positions, and changing tools. Review machine operating criteria such as cycle time and spindle rpm.?Change, position and secure tools in tool holders by utilizing tool monitoring system and presetting equipment. ?Perform first piece sample inspection according to the operation control plan. By utilizing qualified measuring devices, the machinist monitors the part dimensions through continuous checking of part features and process control tools (such as SPC).?Maintain all lubricants and coolants on the machine that are used in daily operation.?Keep work area clean.?Punching, employing recognized tooling and procedures where tolerances are close.?Assist lower-level operators to develop skills and to produce production parts to spec.?Operates all common machine shop equipment and hand tools skillfully.?Machine set up, adjustments and check out programming and operates machines to perform a series of progressive machining operations to exact tolerances and finish specifications requiring considerable skill.?Sets up machines for less skills machine operators.?Produces precision items beyond the capabilities of production machine operators.?Oversees production area to make sure machine operators are sweeping daily, disposing of scrap properly, and maintaining the workplace in a safe and orderly manner.Working hours: 3:00 PM - 1:15 AMSkills:--Requires a thorough knowledge of advanced shop mathematics, inspection processes, and precision measuring instruments--Requires a high degree of experience and trade skill--Regularly required to use hands or fingers, reach, bend, twist, lifting up to 30 lbs., and talk and hear--Requires a thorough knowledge of machine shop practices and production methodsEducation:High SchoolExperience:0-1 yearsQualifications:?Requires a high school diploma or GED?Requires a passing pre-employment screening, including a drug screen DIRECT HIRE with 100% Employee owned Company. BENEFITS! BENEFITS! BENEFITS! Including FREE CLINIC for employee and dependents!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Set-up and operate numerically controlled machine tools with single and/or multiple spindles in a safe manner. Monitor and control the quality of machining processes by utilizing process control tools such as; control charts and statistical process controls. Maintain the production processes and work within the expected efficiencies that are established for the product.Responsibilities:?Read blueprints, drawings, specifications and shop orders for all manufactured parts. i.e., dimensions, tolerances, inspection, number of parts to be machined and tooling instructions such as; cutting speeds, feed rates, depth of cuts, and cutting tools required.?Use machine controls to cycle machine through; production operations, set-up, adjusting tool positions, and changing tools. Review machine operating criteria such as cycle time and spindle rpm.?Change, position and secure tools in tool holders by utilizing tool monitoring system and presetting equipment. ?Perform first piece sample inspection according to the operation control plan. By utilizing qualified measuring devices, the machinist monitors the part dimensions through continuous checking of part features and process control tools (such as SPC).?Maintain all lubricants and coolants on the machine that are used in daily operation.?Keep work area clean.?Punching, employing recognized tooling and procedures where tolerances are close.?Assist lower-level operators to develop skills and to produce production parts to spec.?Operates all common machine shop equipment and hand tools skillfully.?Machine set up, adjustments and check out programming and operates machines to perform a series of progressive machining operations to exact tolerances and finish specifications requiring considerable skill.?Sets up machines for less skills machine operators.?Produces precision items beyond the capabilities of production machine operators.?Oversees production area to make sure machine operators are sweeping daily, disposing of scrap properly, and maintaining the workplace in a safe and orderly manner.Working hours: 3:00 PM - 1:15 AMSkills:--Requires a thorough knowledge of advanced shop mathematics, inspection processes, and precision measuring instruments--Requires a high degree of experience and trade skill--Regularly required to use hands or fingers, reach, bend, twist, lifting up to 30 lbs., and talk and hear--Requires a thorough knowledge of machine shop practices and production methodsEducation:High SchoolExperience:0-1 yearsQualifications:?Requires a high school diploma or GED?Requires a passing pre-employment screening, including a drug screen DIRECT HIRE with 100% Employee owned Company. BENEFITS! BENEFITS! BENEFITS! Including FREE CLINIC for employee and dependents!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Naples, Florida
      • Temp to Perm
      • $18.72 - $19.08 per hour
      • 2:00 PM - 10:00 PM
      Looking for a talented, dedicated Machine Operator for a manufacturing plant in Naples.Responsibilities:Operate machinery and follow processes.Follow all safety, conduct and attendance rules.Follow assigned work schedules, assignments, and production sequences to meet production goals.Accurately enter information into production system/s.Inspect materials, products, and/or equipment to detect defects or malfunctions.Monitor gauges, dials, and other indicators to ensure that operations conform to production or processing standards.Consistently follow specifications, job orders, and company policies and procedures.Ensure your work area is in compliance with safety and sanitation regulations.Working hours: 2:00 PM - 10:00 PMSkills:High school graduate with minimum of 1 yr direct industrial experience is preferred.Mechanical aptitude.Ability to efficiently multi-task.Must be a team-player.Must be self-motivated.Must be detail-oriented.Education:High SchoolExperience:1-4 yearsQualifications:Openings on 2nd shift (2pm-10pm, Mon-Fri) and 3rd shifts as wellAll employees must be fully vaccinatedRequired to talk, hear, stand and walk.Required to stand on your feet to work for several hours at a time.Required to correctly & safely lift, move, sort, place & carry objects weighing up to 50 lbs.Required to use hands and fingers, to handle or feel, grasp, reach, lift, push and pull.Occasionally required to climb, stoop, kneel, crouch or crawl. Several ways to Apply-*Apply in Person MONDAY- FRIDAY between the hours of 9:30am-1:30pm or call our office to schedule an appointment*4964 Tamiami Trail North, Naples FL 34103*Apply on line www.spherionjobcentral.com*Email your Resume by replying to this post*Call our office at 239-494-3044 for more informationSpherion_gtwb_naplesSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Looking for a talented, dedicated Machine Operator for a manufacturing plant in Naples.Responsibilities:Operate machinery and follow processes.Follow all safety, conduct and attendance rules.Follow assigned work schedules, assignments, and production sequences to meet production goals.Accurately enter information into production system/s.Inspect materials, products, and/or equipment to detect defects or malfunctions.Monitor gauges, dials, and other indicators to ensure that operations conform to production or processing standards.Consistently follow specifications, job orders, and company policies and procedures.Ensure your work area is in compliance with safety and sanitation regulations.Working hours: 2:00 PM - 10:00 PMSkills:High school graduate with minimum of 1 yr direct industrial experience is preferred.Mechanical aptitude.Ability to efficiently multi-task.Must be a team-player.Must be self-motivated.Must be detail-oriented.Education:High SchoolExperience:1-4 yearsQualifications:Openings on 2nd shift (2pm-10pm, Mon-Fri) and 3rd shifts as wellAll employees must be fully vaccinatedRequired to talk, hear, stand and walk.Required to stand on your feet to work for several hours at a time.Required to correctly & safely lift, move, sort, place & carry objects weighing up to 50 lbs.Required to use hands and fingers, to handle or feel, grasp, reach, lift, push and pull.Occasionally required to climb, stoop, kneel, crouch or crawl. Several ways to Apply-*Apply in Person MONDAY- FRIDAY between the hours of 9:30am-1:30pm or call our office to schedule an appointment*4964 Tamiami Trail North, Naples FL 34103*Apply on line www.spherionjobcentral.com*Email your Resume by replying to this post*Call our office at 239-494-3044 for more informationSpherion_gtwb_naplesSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Evans, Georgia
      • Temporary
      • $35.00 - $38.00 per hour
      • 7:00 AM - 3:00 PM
      Growing Columbia County manufacturing facility is adding to the team! If you're eager to join an organization where you'll be designing tooling, fixtures, and machines for manufacturing operations that are safe, high quality, manufacture-able, accurate and meet project scope error-free, then this is the position you've been searching for!.In this position you will design and implement tooling, fixturing, and machinery to support new process development and continuous improvement projects. This position will collaborate with manufacturing engineering teams to develop equipment solutions for assembly and manufacturing. In addition, you will responsible for researching new technologies and innovations in order to implement cost effective and efficient solutions. If you thrive when responsible for managing project deadlines for both the tool & equipment design team as well as the tool and die department, read on to learn more.Responsibilities include:Coordinate the repair, rebuild and improvement of tooling, fixturing, and machineryResponsible for quoting and project deadlines for new tooling and equipment design projects.Reviews and approves designs, drawings, details, etc. at the group level. Specifies, requisitions, and buys tooling materials and components. Expedites tooling projects to insure their timely completion.Performs as liaison, when assigned, with equipment manufacturers, sub-contractors and tooling service firms engaged by the company.Support NPD and continuous improvement projects by collaborating with engineering and operations teams to ensure project deadlines are achievedProvides engineering assistance during tool construction and initial tool tryout and debug. Ensures that tools are dimensionally verified and are production ready when released.Establish process for design request and direct equipment design and tool and die team prioritiesKeeps abreast of new developments in the field of tooling, applications and methods. Recommends the adoption of innovations when applications are feasible to improve quality and production or reduce manufacturing costs.Maintain tool drawing file to insure that all tool designs are maintained in as-built status in accordance to QSP-0096Must be able to manage multiple projects concurrentlyWorking hours: 7:00 AM - 3:00 PMSkills:The ideal candidate:--Ability to manage multiple projects with time sensitivity--Creativity in problem solving--Proven ability to meet deadlines--Clear communicator and can convert complex ideas into designs--Strong collaborationEducation:AssociateExperience:4-7 yearsQualifications:Qualified candidates should possess:--Min two-year degree required--5+ years of experience as a tool & die or equipment designer--Must be proficient in the use of CAD--Pro E software experience preferred--Strong background in die/fixture design, metal working materials, mechanics, and heat treating--Required experience and familiarity with CNC machine tools and parts making--Preferred experience with WindchillDon't delay, submit your resume and application today: www.spherion.com/apply/75751Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Growing Columbia County manufacturing facility is adding to the team! If you're eager to join an organization where you'll be designing tooling, fixtures, and machines for manufacturing operations that are safe, high quality, manufacture-able, accurate and meet project scope error-free, then this is the position you've been searching for!.In this position you will design and implement tooling, fixturing, and machinery to support new process development and continuous improvement projects. This position will collaborate with manufacturing engineering teams to develop equipment solutions for assembly and manufacturing. In addition, you will responsible for researching new technologies and innovations in order to implement cost effective and efficient solutions. If you thrive when responsible for managing project deadlines for both the tool & equipment design team as well as the tool and die department, read on to learn more.Responsibilities include:Coordinate the repair, rebuild and improvement of tooling, fixturing, and machineryResponsible for quoting and project deadlines for new tooling and equipment design projects.Reviews and approves designs, drawings, details, etc. at the group level. Specifies, requisitions, and buys tooling materials and components. Expedites tooling projects to insure their timely completion.Performs as liaison, when assigned, with equipment manufacturers, sub-contractors and tooling service firms engaged by the company.Support NPD and continuous improvement projects by collaborating with engineering and operations teams to ensure project deadlines are achievedProvides engineering assistance during tool construction and initial tool tryout and debug. Ensures that tools are dimensionally verified and are production ready when released.Establish process for design request and direct equipment design and tool and die team prioritiesKeeps abreast of new developments in the field of tooling, applications and methods. Recommends the adoption of innovations when applications are feasible to improve quality and production or reduce manufacturing costs.Maintain tool drawing file to insure that all tool designs are maintained in as-built status in accordance to QSP-0096Must be able to manage multiple projects concurrentlyWorking hours: 7:00 AM - 3:00 PMSkills:The ideal candidate:--Ability to manage multiple projects with time sensitivity--Creativity in problem solving--Proven ability to meet deadlines--Clear communicator and can convert complex ideas into designs--Strong collaborationEducation:AssociateExperience:4-7 yearsQualifications:Qualified candidates should possess:--Min two-year degree required--5+ years of experience as a tool & die or equipment designer--Must be proficient in the use of CAD--Pro E software experience preferred--Strong background in die/fixture design, metal working materials, mechanics, and heat treating--Required experience and familiarity with CNC machine tools and parts making--Preferred experience with WindchillDon't delay, submit your resume and application today: www.spherion.com/apply/75751Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Leesburg, Florida
      • Temp to Perm
      • $18.00 - $21.00 per hour
      • 6:30 AM - 5:00 PM
      Spherion Staffing Leesburg is looking for two Production Leads to join a growing fast-paced manufacturer in Leesburg! One lead for day shift Monday to Friday 6:30 am to 5:00 pm, and one for the night shift Monday to Thursday 5:00 pm to 3:30 am and Fridays as needed. The starting pay rate is $18-$21/hr DOE.Responsibilities:Our Production Leader is in charge of the entire production process for a particular or set of products. They plan, organize and recommend strategies in ensuring that the product is developed successfully, in accordance with all specifications. They supervise teams that work in operations and product development. Enforce safety rules on team members. Interview and train employees. This facility produces supplements, food, vitamins, and drink mixes and uses a variety of delivery methods. They also offer production services (bottling, blending, encapsulation, etc.).Working hours: 6:30 AM - 5:00 PMSkills:- Must be able to follow directions and met production schedules- Lead other members of the production team- Coordinating activities such as machine operation, production, processing, packing, and sorting- Quality AssuranceEducation:High SchoolExperience:1-4 yearsQualifications:- Strong leadership skills- Follow product specifications and FDA requirements For immediate consideration apply today with your resume.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing Leesburg is looking for two Production Leads to join a growing fast-paced manufacturer in Leesburg! One lead for day shift Monday to Friday 6:30 am to 5:00 pm, and one for the night shift Monday to Thursday 5:00 pm to 3:30 am and Fridays as needed. The starting pay rate is $18-$21/hr DOE.Responsibilities:Our Production Leader is in charge of the entire production process for a particular or set of products. They plan, organize and recommend strategies in ensuring that the product is developed successfully, in accordance with all specifications. They supervise teams that work in operations and product development. Enforce safety rules on team members. Interview and train employees. This facility produces supplements, food, vitamins, and drink mixes and uses a variety of delivery methods. They also offer production services (bottling, blending, encapsulation, etc.).Working hours: 6:30 AM - 5:00 PMSkills:- Must be able to follow directions and met production schedules- Lead other members of the production team- Coordinating activities such as machine operation, production, processing, packing, and sorting- Quality AssuranceEducation:High SchoolExperience:1-4 yearsQualifications:- Strong leadership skills- Follow product specifications and FDA requirements For immediate consideration apply today with your resume.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Ogden, Utah
      • Permanent
      • $20.00 - $35.00 per hour
      • 6:00 AM - 2:30 PM
      Spherion Staffing is seeking dynamic and progressive machinists at all skill levels to join our client in Ogden, UT on a direct hire basis. This means if offered the position, you would be hired directly through the company and have benefits day 1. This client offers a comprehensive benefits package and various shift are opportunities available. This role includes the opportunity to manufacture aerospace components utilizing Swiss turning machines, 5 axis mills, EDM equipment, multi-wheel CNC grinders, manual and CNC milling, and lathe equipment. A successful candidate will set up and operate numerically controlled machining centers. Perform work from blueprints, sketches, planning sheets, verbal instructions, and or engineering, tooling, or equipment information. Work from setup instructions, and NC programs. Troubleshoot NC programming during proofing of new processes. Contribute to lean initiatives to increase productivity and reduce the manufacturing cost of the product. Work independently with minimum guidance in a team environment.Responsibilities:Responsibilities? Interpret customer requirements from blueprints, complex drawings, engineering specifications, quality directives, charts, sketches, and verbal instructions.? Setup, adjust, and operate a variety of machine tools to optimize process capability. Adapt or improvise tooling to accomplish results. Utilize a broad knowledge and understanding of production machining technology, operating skills, and shop techniques. Implement manufacturing methods using standard production machines, materials and tooling.? Setup and perform complex machining operations that require close and exact tolerances, dimensional relationships, unusual contours, and dimensional finish requirements.? Operate multiple machines efficiently, which may require multiple simultaneous operations.? Troubleshoot and resolve machining problems.? Responsible for machining and verifying parts to customer requirements while maintaining high levels of quality and efficiency.? Inspect completed parts for conformance to customer requirements through visual examination and utilize inspection instruments such as gauges, calipers, micrometers, comparators, surface plate techniques and surface testing equipment. May be required to use coordinate measuring machines (CMM).? Use advanced shop level mathematics which may include trigonometry and complex tool path calculations.? Actively contribute to lean initiatives by identifying and providing suggestions for areas of improvement. Effectively apply lean concepts to the work area.? Routinely maintains equipment to ensure machine cleanliness, accuracy, and reliability.Working hours: 6:00 AM - 2:30 PMSkills:Ability to read blue printsBasic Computer SkillsEducation:High SchoolExperience:1-4 yearsQualifications:Job Requirements? Able to read and follow blueprints, specifications, and verbal instructions? Has working knowledge of machine shop mathematics, may include trigonometry.? Effectively applies lean initiatives? Demonstrates effective verbal, written, and interpersonal communication skills, as well as the ability to work in a team environment? Basic computer skills including ability to use job specific software? Effectively demonstrates team member competencies and participates in goal setting, performance feedback, and self-development activities. If this sounds like a position that you would be interested in, please submit your resume to Spherion Staffing at OgdenUT-DL@Spherion.com and in the subject line put "Machinist". One of our recruiters will be with you immediately. If you would like more information about this position, please call or text us at 801-825-1100.Spherion is an Equal Opportunity and Affirmative Action Employer. Spherion is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job related reasons regardless of race, ethnicity, color, religion, sex, sexual orientation, age, national origin, disability, gender identity, genetic information, veteran status, or any other status protected by law. However, U.S. Citizenship, Permanent Residency or other appropriate status is required for certain positions, in accord with U.S. import & export regulations.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing is seeking dynamic and progressive machinists at all skill levels to join our client in Ogden, UT on a direct hire basis. This means if offered the position, you would be hired directly through the company and have benefits day 1. This client offers a comprehensive benefits package and various shift are opportunities available. This role includes the opportunity to manufacture aerospace components utilizing Swiss turning machines, 5 axis mills, EDM equipment, multi-wheel CNC grinders, manual and CNC milling, and lathe equipment. A successful candidate will set up and operate numerically controlled machining centers. Perform work from blueprints, sketches, planning sheets, verbal instructions, and or engineering, tooling, or equipment information. Work from setup instructions, and NC programs. Troubleshoot NC programming during proofing of new processes. Contribute to lean initiatives to increase productivity and reduce the manufacturing cost of the product. Work independently with minimum guidance in a team environment.Responsibilities:Responsibilities? Interpret customer requirements from blueprints, complex drawings, engineering specifications, quality directives, charts, sketches, and verbal instructions.? Setup, adjust, and operate a variety of machine tools to optimize process capability. Adapt or improvise tooling to accomplish results. Utilize a broad knowledge and understanding of production machining technology, operating skills, and shop techniques. Implement manufacturing methods using standard production machines, materials and tooling.? Setup and perform complex machining operations that require close and exact tolerances, dimensional relationships, unusual contours, and dimensional finish requirements.? Operate multiple machines efficiently, which may require multiple simultaneous operations.? Troubleshoot and resolve machining problems.? Responsible for machining and verifying parts to customer requirements while maintaining high levels of quality and efficiency.? Inspect completed parts for conformance to customer requirements through visual examination and utilize inspection instruments such as gauges, calipers, micrometers, comparators, surface plate techniques and surface testing equipment. May be required to use coordinate measuring machines (CMM).? Use advanced shop level mathematics which may include trigonometry and complex tool path calculations.? Actively contribute to lean initiatives by identifying and providing suggestions for areas of improvement. Effectively apply lean concepts to the work area.? Routinely maintains equipment to ensure machine cleanliness, accuracy, and reliability.Working hours: 6:00 AM - 2:30 PMSkills:Ability to read blue printsBasic Computer SkillsEducation:High SchoolExperience:1-4 yearsQualifications:Job Requirements? Able to read and follow blueprints, specifications, and verbal instructions? Has working knowledge of machine shop mathematics, may include trigonometry.? Effectively applies lean initiatives? Demonstrates effective verbal, written, and interpersonal communication skills, as well as the ability to work in a team environment? Basic computer skills including ability to use job specific software? Effectively demonstrates team member competencies and participates in goal setting, performance feedback, and self-development activities. If this sounds like a position that you would be interested in, please submit your resume to Spherion Staffing at OgdenUT-DL@Spherion.com and in the subject line put "Machinist". One of our recruiters will be with you immediately. If you would like more information about this position, please call or text us at 801-825-1100.Spherion is an Equal Opportunity and Affirmative Action Employer. Spherion is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job related reasons regardless of race, ethnicity, color, religion, sex, sexual orientation, age, national origin, disability, gender identity, genetic information, veteran status, or any other status protected by law. However, U.S. Citizenship, Permanent Residency or other appropriate status is required for certain positions, in accord with U.S. import & export regulations.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mobile, Alabama
      • Temp to Perm
      • $15.75 per hour
      • 7:00 PM - 7:00 AM
      Expedite transactions through the warehouse management systemResponsibilities:Plan, allocate, pick, manifest, and close daily waves of ordersWork closely with operationsManage the scheduling of inbound carriers and the outbound shipping scheduleGenerate and utilize system reportsWorking hours: 7:00 PM - 7:00 AMSkills:Communication SkillsComputer KnowledgeEducation:No Degree RequiredExperience:1-4 yearsQualifications:Experience as a Machine Operator Positions located in Mobile, ALPay Rate: $15.75/hrD Shift: Wed, Thurs, Fri and every other Sat 7 pm - 7 amSend your resume to: cherylwilliams@spherion.comApply at: www.spherion.comSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Expedite transactions through the warehouse management systemResponsibilities:Plan, allocate, pick, manifest, and close daily waves of ordersWork closely with operationsManage the scheduling of inbound carriers and the outbound shipping scheduleGenerate and utilize system reportsWorking hours: 7:00 PM - 7:00 AMSkills:Communication SkillsComputer KnowledgeEducation:No Degree RequiredExperience:1-4 yearsQualifications:Experience as a Machine Operator Positions located in Mobile, ALPay Rate: $15.75/hrD Shift: Wed, Thurs, Fri and every other Sat 7 pm - 7 amSend your resume to: cherylwilliams@spherion.comApply at: www.spherion.comSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Ottawa, Ohio
      • Temp to Perm
      • $20.00 - $30.00 per hour
      • 40+ hours
      Looking to hire immediate Powder Coaters for a welding fabrication shop in Ottawa, OH. This company has been in business since 1983. Earn up to $30.00 an hour. Responsibilities: Daily setup and operation of sandblast, powder coat preparation, wash bay, coating, drying and packaging of product. Operator will be required to assist other operators with various machines as required. This is a cross functional position. Inspecting and preparing product to be blasted / coated Safely operate a forklift to handle materials and completed work Report and document basic material, production and quality control issues Qualifications: Must have strong sandblast powder coating application background Basic knowledge of fabrication, hydraulic press and/or punch operations including basic set up Dress code: t-shirt, jeans, steel toes Lift, carry, push or pull 60 pounds frequently Stand and walk for 10 hours per day Squat/kneel, bend/stoop and reach overhead frequently Compensation and Benefits: $20.00 - $30.00 an hour Full benefits Spherion offers ACA compliant health insurance once you start working! Interested candidates need to fill out our online ‘Apply Now’ application and then call the office at (419) 227-0113.
      Looking to hire immediate Powder Coaters for a welding fabrication shop in Ottawa, OH. This company has been in business since 1983. Earn up to $30.00 an hour. Responsibilities: Daily setup and operation of sandblast, powder coat preparation, wash bay, coating, drying and packaging of product. Operator will be required to assist other operators with various machines as required. This is a cross functional position. Inspecting and preparing product to be blasted / coated Safely operate a forklift to handle materials and completed work Report and document basic material, production and quality control issues Qualifications: Must have strong sandblast powder coating application background Basic knowledge of fabrication, hydraulic press and/or punch operations including basic set up Dress code: t-shirt, jeans, steel toes Lift, carry, push or pull 60 pounds frequently Stand and walk for 10 hours per day Squat/kneel, bend/stoop and reach overhead frequently Compensation and Benefits: $20.00 - $30.00 an hour Full benefits Spherion offers ACA compliant health insurance once you start working! Interested candidates need to fill out our online ‘Apply Now’ application and then call the office at (419) 227-0113.
      • Ridgeway, South Carolina
      • Permanent
      • $60,000 - $70,000 per year
      • 8:00 AM - 5:00 PM
      Our client, a Tier 1 automotive manufacturer, is seeking a Maintenance Supervisor in the Columbia, SC area. This is a key role that offers excellent pay and benefits, a strong work-life balance, and the opportunity to manage daily operations which includes inventory management, equipment procurement, and other maintenance responsibilities.Responsibilities:- Implement maintenance procedures to ensure budgetary requirements are met - Manage maintenance personnel by creating schedules and establishing prioritization of needs- Maintain department budget, parts inventory, purchase orders, and invoice approvals- Develop preventative maintenance plans to demonstrate an effort of maintenance and reliability initiatives - Collaborate cross-functionally with manufacturers, line integrators, and engineers to create spare parts list based on part criticality - Maintain quality and safety standardsWorking hours: 8:00 AM - 5:00 PMSkills:- Sound knowledge of mechanical, hydraulic, and electrical engineering concepts - Excellent communication and leadership skills- Proven ability to make decisions using problem-solving skillsEducation:BachelorsExperience:4-7 yearsQualifications:- Bachelor's degree required- 10+ years in maintenance management role - Experience with AM/PM and TPM programs Apply today for immediate consideration!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Our client, a Tier 1 automotive manufacturer, is seeking a Maintenance Supervisor in the Columbia, SC area. This is a key role that offers excellent pay and benefits, a strong work-life balance, and the opportunity to manage daily operations which includes inventory management, equipment procurement, and other maintenance responsibilities.Responsibilities:- Implement maintenance procedures to ensure budgetary requirements are met - Manage maintenance personnel by creating schedules and establishing prioritization of needs- Maintain department budget, parts inventory, purchase orders, and invoice approvals- Develop preventative maintenance plans to demonstrate an effort of maintenance and reliability initiatives - Collaborate cross-functionally with manufacturers, line integrators, and engineers to create spare parts list based on part criticality - Maintain quality and safety standardsWorking hours: 8:00 AM - 5:00 PMSkills:- Sound knowledge of mechanical, hydraulic, and electrical engineering concepts - Excellent communication and leadership skills- Proven ability to make decisions using problem-solving skillsEducation:BachelorsExperience:4-7 yearsQualifications:- Bachelor's degree required- 10+ years in maintenance management role - Experience with AM/PM and TPM programs Apply today for immediate consideration!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Montgomery, Pennsylvania
      • Permanent
      • 6am-430pm
      We are currently hiring Assemblers in Montgomery. Person would be assembling various components involved in refrigerated trailer and body manufacturing process. 
      We are currently hiring Assemblers in Montgomery. Person would be assembling various components involved in refrigerated trailer and body manufacturing process. 
      • Warsaw, Indiana
      • Temporary
      • $17.00 per hour
      • Various Shifts Available
      Spherion is hiring Straighteners in Warsaw, IN!Shift and pay:Monday-Friday1st shift: 7AM-3PM $17/HR3rd shift: 11PM-7AM $17/HRWork 7.5 hours but get paid for 8! This is a growing industry that provides room for growth!Responsibilities:Job description: Employees will be responsible for straightening parts and checking the straightness of parts in accordance with work instructions to meet customer requirements.-Responsible for straightening parts per customer requirements.-Check orders in Straightening area for paperwork accuracy, verify count and move to next location-Follow urgent needs jobs through the straightening area to guarantee delivery-Runs production in accordance with established procedures and guidelines-Maintain production quality to customer requirements-Read and interpret blueprints and work operation sheets to determine appropriate operations to be performed.-Reports key job status to Departmental Supervisor or Manufacturing Manager-Cross train in other finishing areas.-Comply with all company policies and procedures -Other duties as assigned.Working hours: Various Shifts AvailableSkills:-Attention to detail-Ability to multi-task-Ability to read and understand a dial indicator used to straighten the part to required print tolerance. -Knowledge of Workstation Driver-Ability to use dial indicators-Good interpersonal skills-Self-starter and ability to work in a fast-paced environmentEducation:High SchoolExperience:0-1 yearsQualifications:-High School Diploma required.-Blueprint reading experience preferred -Ability to stand for long periods of time-Physical ability to lift 50 lbs. Apply today! Once you apply, call or text (574) 306-5566 to get started!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is hiring Straighteners in Warsaw, IN!Shift and pay:Monday-Friday1st shift: 7AM-3PM $17/HR3rd shift: 11PM-7AM $17/HRWork 7.5 hours but get paid for 8! This is a growing industry that provides room for growth!Responsibilities:Job description: Employees will be responsible for straightening parts and checking the straightness of parts in accordance with work instructions to meet customer requirements.-Responsible for straightening parts per customer requirements.-Check orders in Straightening area for paperwork accuracy, verify count and move to next location-Follow urgent needs jobs through the straightening area to guarantee delivery-Runs production in accordance with established procedures and guidelines-Maintain production quality to customer requirements-Read and interpret blueprints and work operation sheets to determine appropriate operations to be performed.-Reports key job status to Departmental Supervisor or Manufacturing Manager-Cross train in other finishing areas.-Comply with all company policies and procedures -Other duties as assigned.Working hours: Various Shifts AvailableSkills:-Attention to detail-Ability to multi-task-Ability to read and understand a dial indicator used to straighten the part to required print tolerance. -Knowledge of Workstation Driver-Ability to use dial indicators-Good interpersonal skills-Self-starter and ability to work in a fast-paced environmentEducation:High SchoolExperience:0-1 yearsQualifications:-High School Diploma required.-Blueprint reading experience preferred -Ability to stand for long periods of time-Physical ability to lift 50 lbs. Apply today! Once you apply, call or text (574) 306-5566 to get started!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Montgomery, Pennsylvania
      • Temporary
      • 6am-430pm
      We are currently hiring for Welders in Montgomery. Joins, fabricates, and repairs metal and other weld able material by applying appropriate welding techniques. Interprets blueprints, specifications and diagrams to determine appropriate welding process. Inspects completed welds to determine structural soundness.
      We are currently hiring for Welders in Montgomery. Joins, fabricates, and repairs metal and other weld able material by applying appropriate welding techniques. Interprets blueprints, specifications and diagrams to determine appropriate welding process. Inspects completed welds to determine structural soundness.
      • Evans, Georgia
      • Temporary
      • $17.00 per hour
      • 8:00 AM - 5:00 PM
      Great opportunity to join the customer service team of one of Columbia County's leading employers! If you enjoy managing a portfolio of customers and ensuring their overall satisfaction, we need to chat about this opportunity!Responsibilities:In this position you will be supporting businesses across the US providing excellent and comprehensive customer support for parts, pre order activities (pricing, availability, proposal, quoting, technical specifications, parts identification and custom solutions). as well as will manage part orders and escalations from placement to invoicing through multiple channels (phone, fax, EDI, E-Mail, and websites) with promise dates, order entry support, date management, credit processes, transportation, international load codes, CPU, etc.) in collaboration with finance, supply chain and operations. This is a fast paced, multi-faceted role with room to grow!Working hours: 8:00 AM - 5:00 PMSkills:The ideal candidate will work well independently with minimal direction, possess excellent communication and interpersonal skills, excel in managing multiple priorities and deadlines as well as have an eye for detail and very thorough.Education:AssociateExperience:4-7 yearsQualifications:Associates degree required, Bachelors degree preferred, along with 5+ years related experience. Interested in learning more? Don't delay - upload your resume today: www.spherion.com/applySpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Great opportunity to join the customer service team of one of Columbia County's leading employers! If you enjoy managing a portfolio of customers and ensuring their overall satisfaction, we need to chat about this opportunity!Responsibilities:In this position you will be supporting businesses across the US providing excellent and comprehensive customer support for parts, pre order activities (pricing, availability, proposal, quoting, technical specifications, parts identification and custom solutions). as well as will manage part orders and escalations from placement to invoicing through multiple channels (phone, fax, EDI, E-Mail, and websites) with promise dates, order entry support, date management, credit processes, transportation, international load codes, CPU, etc.) in collaboration with finance, supply chain and operations. This is a fast paced, multi-faceted role with room to grow!Working hours: 8:00 AM - 5:00 PMSkills:The ideal candidate will work well independently with minimal direction, possess excellent communication and interpersonal skills, excel in managing multiple priorities and deadlines as well as have an eye for detail and very thorough.Education:AssociateExperience:4-7 yearsQualifications:Associates degree required, Bachelors degree preferred, along with 5+ years related experience. Interested in learning more? Don't delay - upload your resume today: www.spherion.com/applySpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Owatonna, Minnesota
      • Permanent
      • $30.00 - $35.00 per hour
      • 6:00 AM - 6:00 PM
      Operate and maintain the boiler generation system, air compressor and fire sprinkler system.Responsibilities:Troubleshoot boiler equipment, dealkalizers system, air compressors, and fire sprinkler systems and make the necessary repairs.Analyze and interpret the chemical composition of the boiler water.Maintain accurate records of boiler operations.Must know how to weld and use a cutting torch. Should have a thorough knowledge of pipe threading and welding. Should know the ratings for SCH 40 and SCH 80 pipe, both black and galvanized.Must have a thorough knowledge of all plant steam generation systems and equipment. Must know how to operate and service all steam heating units and steam water-heating units. Must know how to run all chemical tests necessary to operate the boiler.Ability to keep all boilers operating as plant load dictates, monitor boilers, water levels, check water quantities of softeners and dealkalizers and equipment is working properly.Ability to make necessary repairs in the boiler room as needed and maintain safety / efficiency of the boiler room.Boiler operator will monitor doors and lights when plant is not in operations, also includes fire alarm system during shift.Boiler operator will be assigned to work and assist in the cooker jams, repairs or adjustments.Must possess a complete set of tools for mechanical maintenance.Must be able to work independently on all equipment. Should require no supervision.Must be familiar with standard boiler safety procedures, state laws governing boiler safety, and all company safety policies.Back up to Chief Engineer for on call status.Properly maintain / perform preventive maintenance on all heating ventilation and cooling equipment (HVAC).All boiler operators will adhere to instructions from the assigned boiler chief in charge.Boiler operators may be assigned work duties from their manager or chief in charge.Boiler operators will monitor all air systems and vacuum systems where applicable and make necessary arrangements to maintain an adequate air supply and check for excess moisture in the system and bleed system if needed.Maintain work area in a clean and orderly manner. May perform other duties as assigned by the Supervisor. Adhere to all Lakeside Foods policies and procedures.Notify supervisor immediately if any unsafe or potentially hazardous conditions are discovered.Working hours: 6:00 AM - 6:00 PMSkills:Language Skills:--Ability to read and to interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Reasoning Ability: --Ability to apply common sense understanding to carry out instructions furnished in written and oral, or diagram form.--Ability to deal with problems involving several concrete variables in standardized situations.TEAMWORK:--Through individual and team efforts, enthusiastically work toward the continuous improvement of his/her job, work area, department and Lakeside as a whole. Fully participate in TAL by "living" company Standards of Conduct and being an active member of operational and project teams. By action and work, clearly and visibly demonstrate the spirit of teamwork, cooperation and respect for others in all business transactions and exchanges.PHYSICAL DEMANDS:--While performing the duties of this job, the employee is regularly required to stand; walk; use hands and fingers to handle or feel objects, tools, or controls and reach with hands and arms. --The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl.--The employee must regularly lift and/or move up to 50 po
      Operate and maintain the boiler generation system, air compressor and fire sprinkler system.Responsibilities:Troubleshoot boiler equipment, dealkalizers system, air compressors, and fire sprinkler systems and make the necessary repairs.Analyze and interpret the chemical composition of the boiler water.Maintain accurate records of boiler operations.Must know how to weld and use a cutting torch. Should have a thorough knowledge of pipe threading and welding. Should know the ratings for SCH 40 and SCH 80 pipe, both black and galvanized.Must have a thorough knowledge of all plant steam generation systems and equipment. Must know how to operate and service all steam heating units and steam water-heating units. Must know how to run all chemical tests necessary to operate the boiler.Ability to keep all boilers operating as plant load dictates, monitor boilers, water levels, check water quantities of softeners and dealkalizers and equipment is working properly.Ability to make necessary repairs in the boiler room as needed and maintain safety / efficiency of the boiler room.Boiler operator will monitor doors and lights when plant is not in operations, also includes fire alarm system during shift.Boiler operator will be assigned to work and assist in the cooker jams, repairs or adjustments.Must possess a complete set of tools for mechanical maintenance.Must be able to work independently on all equipment. Should require no supervision.Must be familiar with standard boiler safety procedures, state laws governing boiler safety, and all company safety policies.Back up to Chief Engineer for on call status.Properly maintain / perform preventive maintenance on all heating ventilation and cooling equipment (HVAC).All boiler operators will adhere to instructions from the assigned boiler chief in charge.Boiler operators may be assigned work duties from their manager or chief in charge.Boiler operators will monitor all air systems and vacuum systems where applicable and make necessary arrangements to maintain an adequate air supply and check for excess moisture in the system and bleed system if needed.Maintain work area in a clean and orderly manner. May perform other duties as assigned by the Supervisor. Adhere to all Lakeside Foods policies and procedures.Notify supervisor immediately if any unsafe or potentially hazardous conditions are discovered.Working hours: 6:00 AM - 6:00 PMSkills:Language Skills:--Ability to read and to interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Reasoning Ability: --Ability to apply common sense understanding to carry out instructions furnished in written and oral, or diagram form.--Ability to deal with problems involving several concrete variables in standardized situations.TEAMWORK:--Through individual and team efforts, enthusiastically work toward the continuous improvement of his/her job, work area, department and Lakeside as a whole. Fully participate in TAL by "living" company Standards of Conduct and being an active member of operational and project teams. By action and work, clearly and visibly demonstrate the spirit of teamwork, cooperation and respect for others in all business transactions and exchanges.PHYSICAL DEMANDS:--While performing the duties of this job, the employee is regularly required to stand; walk; use hands and fingers to handle or feel objects, tools, or controls and reach with hands and arms. --The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl.--The employee must regularly lift and/or move up to 50 po
      • Mankato, Minnesota
      • Permanent
      • $21.80 per hour
      • 10:00 PM - 6:00 PM
      As a CNC Machinist, you will support metalworking projects from planning and fabrication through assembly, inspection, and testing, using knowledge of machine functions, metal properties and mathematics.3rd shift hours: Sunday night - Friday morning, 10:00 p.m. - 6:00 a.m.Pay: Starting at $21.80 an hourResponsibilities:Set up, adjust, and operate basic or specialized machine tools used to perform precision machining operations.Fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures.Design fixtures, tooling, or experimental parts to meet special engineering needs.Utilize gauges, micrometers, Vernier calipers, charts, and other tools to measure tolerance, make decisions and record data.Working hours: 10:00 PM - 6:00 PMSkills:Ability to machine parts to specifications, using machine tools, such as lathes, milling machines, shapers, or grinders.Mechanically inclined and good with hand tools. Our team members.Experience in Lean Manufacturing.Experience using complex technical tools, CAD and CAM.Education:High SchoolExperience:1-4 yearsQualifications:A strong, stable work history.High school Diploma or GED equivalent is required.Degree or Certificate in CNC Machining, Completion Right Skills Now Course or equivalent experience required. This is a Direct Hire Opportunity! Please apply online or call and ask for Jennifer at 507-432-2430.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      As a CNC Machinist, you will support metalworking projects from planning and fabrication through assembly, inspection, and testing, using knowledge of machine functions, metal properties and mathematics.3rd shift hours: Sunday night - Friday morning, 10:00 p.m. - 6:00 a.m.Pay: Starting at $21.80 an hourResponsibilities:Set up, adjust, and operate basic or specialized machine tools used to perform precision machining operations.Fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures.Design fixtures, tooling, or experimental parts to meet special engineering needs.Utilize gauges, micrometers, Vernier calipers, charts, and other tools to measure tolerance, make decisions and record data.Working hours: 10:00 PM - 6:00 PMSkills:Ability to machine parts to specifications, using machine tools, such as lathes, milling machines, shapers, or grinders.Mechanically inclined and good with hand tools. Our team members.Experience in Lean Manufacturing.Experience using complex technical tools, CAD and CAM.Education:High SchoolExperience:1-4 yearsQualifications:A strong, stable work history.High school Diploma or GED equivalent is required.Degree or Certificate in CNC Machining, Completion Right Skills Now Course or equivalent experience required. This is a Direct Hire Opportunity! Please apply online or call and ask for Jennifer at 507-432-2430.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
    60 of 103 jobs seen

    Thank you for subscribing to your personalized job alerts.

    It looks like you want to switch your language. This will reset your filters on your current job search.