810 jobs found for manufacturing production - Page 2

Daily Shift RoutinePacking plastic bottles for shipping Start of Shift:-Review the following with the out-going Packer.-Any product quality problems including any rejected products.-Check carton labels at machine to verify information is correct.-Visually inspect products -Keep the work area free of obstacles that may create an unsafe condition.-Assemble cartons. Ensure carton is clean with no previous labels or markings.-Place bag liners in each carton. Open bag just before placing bottles in. Minimize the time a bag is left open unattended. Quantity should not exceed one hour worth of production.-Pack cartons in the packing pattern and quantity per carton specified for the job.-When carton is full, verify product matches the carton label.-Place carton label on carton in the location specified and in sequential order.-Place tape on carton to close and completely cover center carton seam.-Assemble pallets using the pallet type and carton stacking pattern specified from the job.-Sweep around machines and packing area.-Clean work surfaces and accumulator tables.Responsibilities:.Working hours: Various Shifts AvailableSkills:.Education:High SchoolExperience:0-1 yearsQualifications:. .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Spherion is hiring a Materials Planner immediately for a position in Asheville, NC. This position will primarily assist the Production Planner and Plant Manager in purchasing, scheduling, and planning of materials and labor for production. The ideal candidate will have 1 to 4 years of experience using SAP and have advanced computer skills.Responsibilities:Plan and prioritize operations to ensure maximum performance and minimum delayDetermine equipment and raw materials needed to cover production demandObtain and report output information (number of finished products, percentage of defectives, etc.)Collaborate with quality control and logistics to determine points of frictionWorking hours: 8:00 AM - 5:00 PMSkills:Excellent knowledge of production planning and quality control principlesWorking knowledge of MS Office and SAPStrong organizational and problem-solving skillsEducation:BachelorsExperience:1-4 yearsQualifications:Bachelor's degree in Business or related field is preferred1 to 4 years of experience in a Production Planning role using SAP is preferred Apply online today or call us directly to apply at 828-348-0390!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Manually or machine sortingResponsibilities:Manual sort of printed materialsAnd/or monitoring a sorting machine and emptying the sorts+Working hours: Various Shifts AvailableSkills:Detail orientedProduction experience helpfulEducation:No Degree RequiredExperience:0-1 yearsQualifications:Must be able to work 8-12 hour shift 5-7 days a weekMust be able to stand a machine and pull materials throughout the shift Immediate openings in TarrantSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Thank you for your interest in working with Spherion; we appreciate you considering us as a partner in your career progression! Our client is looking for an experienced Assembly Workers to handle mechanical and electrical assembly activity in their industrial production facility. Apply now, or if you would prefer to submit your resume via email or have any questions regarding the role feel free to reach out to us directly: 504-455-6565 / spherionneworleans@spherion.com.- Pay rate: $14.00 - $16.00 depending on experience- Shift: 6:00 AM -> 4:00 PM, Monday thru Thursday (4 day weeks/3 day weekends!)- Temporary-to-permanent opportunityResponsibilities:- Assembling electrical and mechanical machinery in an industrial production setting.- Motor mount assembly- Door assembly - Shell front assembly - Valve assemblyWorking hours: 6:30 AM - 4:30 PMSkills:- Electrical assembly skill (preferred, will train)- Mechanical assembly skill (preferred, will train)- Experience working with hand tools (preferred, will train)Education:High SchoolExperience:1-4 yearsQualifications:- Must be able to work in an outdoor, industrial environment throughout all seasons of the year - Able to work on your feet for the duration 10 hour shift in a physically demanding role - HS education or equivalent required - Must be able to understand written and verbal instructions Thank you for your interest in working with Spherion; we appreciate you considering us as a partner in your career progression! If you would prefer to submit your resume via email, or have any questions regarding the role feel free to reach out to us directly: 504-455-6565 / spherionneworleans@spherion.com.Let's get to work!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Rice mill in Woodland is looking for individuals for a temp - to - hire position in their production team!Pay: $18.00/hrSchedule: Monday - Friday, possible overtime on the weekendsShift: 2:00pm - 10:30pm with OTAdvancement opportunities available!Responsibilities:- Filling bags with rice flour- Sending bags through machine to be sealed- Manually palletizing product.Working hours: 2:00 PM - 10:30 PMSkills:- Can lift 50lbs consistently- Bend, twist, move for 8 hour shift- Work fast paced- Stand for 8 hour shiftEducation:No Degree RequiredExperience:0-1 yearsQualifications:Immediate positions available!Benefits available once hired on! Call or Text Spherion for more information(530) 662-8607Check out our Instagram and Facebook for more jobs!@SpherionWoodlandSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.San Francisco Fair Chance Ordinance:Qualified applicants in San Francisco with criminal histories will be considered for employment in accordance with the San Francisco Fair Chance Ordinance.

Looking for talented, dedicated Machine Operators for a manufacturing plant in Naples.Responsibilities:Operate machinery and follow processes.Follow all safety, conduct and attendance rules.Follow assigned work schedules, assignments, and production sequences to meet production goals.Accurately enter information into production system/s.Inspect materials, products, and/or equipment to detect defects or malfunctions.Monitor gauges, dials, and other indicators to ensure that operations conform to production or processing standards.Consistently follow specifications, job orders, and company policies and procedures.Ensure your work area is in compliance with safety and sanitation regulations.Working hours: 2:00 PM - 10:00 PMSkills:High school graduate with minimum of 1 yr direct industrial experience is preferred.Mechanical aptitude.Ability to efficiently multi-task.Must be a team-player.Must be self-motivated.Must be detail-oriented.Education:High SchoolExperience:1-4 yearsQualifications:Openings on 2nd shift (2pm-10pm, Mon-Fri) All employees must be fully vaccinatedRequired to talk, hear, stand and walk.Required to stand on your feet to work for several hours at a time.Required to correctly & safely lift, move, sort, place & carry objects weighing up to 50 lbs.Required to use hands and fingers, to handle or feel, grasp, reach, lift, push and pull.Occasionally required to climb, stoop, kneel, crouch or crawl. Several ways to Apply-*Apply in Person MONDAY- FRIDAY between the hours of 9:30am-1:30pm or call our office to schedule an appointment*4964 Tamiami Trail North, Naples FL 34103*Apply on line www.spherionjobcentral.com*Email your Resume by replying to this post*Call our office at 239-494-3044 for more informationSpherion_gtwb_naplesSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Spherion is looking to fill several 1std Shift Assembler positions immediately for a manufacturing company in Bonita Springs.Responsibilities:Work with small power tools and assembly devicesPerform self-inspections during the assembly process.Packaging products and/or operate bagging machine.Breakdown and dispose of cardboard boxes.Daily cleaning of the work cell, bins and machineryWorking hours: 3:30 PM - 2:00 AMSkills:Mechanically inclinedAbility to assemble, test and package mechanical devices.Ability to follow written and verbal instructions. Understand drawings or diagrams.Education:High SchoolExperience:0-1 yearsQualifications:Ability to work on your feet for 10 hoursGood Communication skills, able to read and speak EnglishAble to pass background and oral drug screenAttendance is importantWork 4 ten hour shifts. Friday's are optional overtime but if you do work on Fridays, you get a $25 Publix Gift Card plus free lunch from the company. This is a temp to hire opportunity.Positions are available immediately.Monday through Thursday:5:30am-4pmFridays are overtime if wanted but not mandatory Several ways to Apply-*Apply in Person MONDAY- FRIDAY between the hours of 9:30am-1:30pm or call our office to schedule an appointment*4964 Tamiami Trail North, Naples FL 34103*Apply on line www.spherionjobcentral.com*Email your Resume by replying to this post*Call our office at 239-494-3044 for more informationSpherion_gtwb_naplesSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

We are seeking a Maintenance Technician for a manufacturing company in Bonita Springs.Responsibilities:Maintain facility and equipment in working conditions to acceptable levels of operating accuracy, safety and cleanliness. Respond to building and equipment emergencies/outages and perform quality checks.Communicate and facilitate projects with outside vendors/contractors (i.e. HVAC service, electrical, construction, landscape, etc.)Take an active role in all lean initiatives as it relates to maintenance.Working hours: 7:00 AM - 3:30 PMSkills:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Education:No Degree RequiredExperience:4-7 yearsQualifications:Three to five years prior experience in similar positionValid Drivers LicenseAbility to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to speak effectively with other employees and vendors. Several ways to Apply-*Apply in Person MONDAY- FRIDAY between the hours of 9:30am-1:30pm or call our office to schedule an appointment*4964 Tamiami Trail North, Naples FL 34103*Apply on line www.spherionjobcentral.com*Email your Resume by replying to this post*Call our office at 239-494-3044 for more informationSpherion_gtwb_naplesSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

This is a local manufacturing plant that makes pharmaceutical and mineral products. Fulfill the daily production demands of a liquid products manufacturing facility as indicated by either the production schedule and/or the shift lead. This position; Hours M - W 6am - 6:30pm, Th 6am - 2pm; next week T - TH 6am - 6:30pm. This is a Temp to Hire Position.Responsibilities:ESSENTIAL FUNCTIONS:? Understand the basic setup, loading and operation of production equipment? Understand the raw ingredient set-up and blending of composite material into finished liquid products? Be able to read and understand a manufacturing formula sheet? Choose the correct items from current inventory, lot number (if indicated)? If not indicated, decide which lot number of products to use based on FIFO (first in-first out)? Weigh out and tag the product amounts based on formula sheet for production? Return excess product to inventory? Function as packager as needed? Clean/maintain production equipment and areas of building as needed or as designated by shift lead? Be aware of and comply with all company Good Manufacturing Practice policies? Understand and abide by OSHA Regulations? Understand and act in accordance with facility Standard Operating Procedures? Develop and/or revise Standard Operating Procedures when neededWorking hours: 6:00 AM - 6:30 PMSkills:WORKING CONDITIONS:-- Exposure to powder and heavy equipment in a manufacturing environment- Position may require walking and standing long periods; reaching above shoulder heights, below the waist or lifting as required to handle materials- Position requires frequent moving of approximately 75 poundsEducation:No Degree RequiredExperience:0-1 yearsQualifications:?High School Diploma or equivalent preferred and a minimum 1 year in manufacturing environment?Must have strong work ethic; be detail oriented; be able to rely on instructions and pre-established guidelines to perform the functions of the job?Must have reliable transportation?Must be willing to adhere to attendance and punctuality policy .Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Spherion Staffing is looking for an EXPERIENCED Paint Mixer person for a local industrial chemical and finishing distributor which provides sales, service, and consulting to the industrial paint and finishing markets in Florida.Responsibilities:1) Mixes stains, paints, and other coatings for use in painting according to formulas: Pours pigments, paint paste, vehicle, and thinner into can.2) Stirs mixture with paddle.3) Compares mixed liquid with desired color sample to ensure that it matches. 4) May blend colors to obtain desired shades.5) May test specific gravity of mixture, using hydrometer.6) When mixing colors for spray painting, may be designated Spray Blender.Working hours: 8:00 AM - 5:00 PMSkills:High School Diploma or equivalent required.1-4 years body shop experience preferred Effective communication (written and verbal) and interpersonal skills required.Ability to work in a high performance, fast-paced team environment.Ability to adapt to and work effectively within a constantly changing environment.Problem solving skills required.PersuasionCustomer FocusTelephone SkillsOrganizationEnergy LevelPersistenceProduct KnowledgeEducation:High SchoolExperience:1-4 yearsQualifications:Must know how to color match with computer software and by weightIs able to work in warm conditions, lift 50 pounds, and get dirty with paint. *Apply on line www.spherionjobcentral.com*Email your Resume by replying to this post*Call our office at 239-494-3044 for more information.Spherion_gtwb_naplesSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Are you looking for a 4 day full time work week? If so, we have an amazing position available for you! Spherion Staffing is searching for a machine operator, preferably with SMT (surface mount technology) experience, for one of our clients located in North Ogden. This company works with electronic circuit boards. If you do not have the SMT experience, but have general production machine experience and an aptitude to learn, they are more than willing to train for this position. This is a temp to hire opportunity. The hours are from 6 am to 4:30 pm Mon-ThursStarting pay will be between $15.00-$16.00Responsibilities:-Operation of all SMT machinery without assistance, including stencil printing and component changes-Follow all operating procedures-Provide feedback on equipment issues or failures.-Read and understand ALL documentation prior to running the equipment and job.-Pass proficiency exam.-Must be adaptable to changes on equipment, customer job, and any other item that comes up.Working hours: 6:00 AM - 4:30 PMSkills:-Must be able to add, subtract, multiply, divide.-Computer skills in Microsoft office (word, excel, etc.)-Must be very detailed in this process.-Ability to lift 10 poundsEducation:No Degree RequiredExperience:0-1 yearsQualifications:PREFERRED QUALIFICATIONS:Education and/or Experience:-High school diploma or equivalent-Understand polarity, values, and components of electronic partsOnce in the position the following will be Training Requirements:-Control of Documents and Data #423-Control of Records #424-Quality Basics # 622-ESD Procedure #755-Written Hazcom Communication Program-Risk Management Process P0147-Foreign Object Debris (FOD) P0148-Continual Improvement P0149-FUJI CP6 Surface Mount Placement Machine P0005-Opal-X II Surface Mount Placement Machine P0034-QMT1100D Embossed Tape Loader P0033-Pre-Reflow Inspection P0007-Aqueous Stencil Cleaner P0046-MPM Screen Printer P0054-Fuji QP2 Surface Mount Placement Machine P0081-Heller 1809 Reflow Oven P0082-Pemtron SPI P0107-DEK Screen Printer P0109-Job Traveler Process Outline #721Additional Information:-Performance reviews are administered to determine employee effectiveness.-Appearance and demeanor must be neat and consistent with a printed circuit board manufacturing environment-Although close communication with the manager is inherent in this position, the ability to work with little supervision is also imperative to be successful. If this sounds like a position that you would be interested in, please submit your resume to OgdenUT-DL@Spherion.com and in the subject line put: SMT Machine OperatorIf you would like more information or to be interviewed for this position, please text the word "SMT" to 801-825-1100Thank you and we look forward to hearing from you!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

We are looking for a Laser Mark Operator for a medical device company in Naples. Performs laser marking operations using gages, calipers and other measuring equipment to check and ensure part quality.Responsibilities:Laser marks products according to customer specificationsLays out and writes up sequential programming and cutwork for laser mark machinesInspects finished work pieces to specifications at prescribed intervals using precision measuring toolsStarts up and operates laser programs and laser fixturesReports nonconforming materials to Quality departmentNotifies the Production Manager if equipment is not operating properlyCompletes all documentation requiredFulfills required Production and Quality Standards with consistently good outputKeeps work area clean and organizedWorking hours: Various Shifts AvailableSkills:Knowledge and understanding of ISO 13485 and FDA 21CFR820 as it pertains to the job, on the job training providedSkilled in the use of computer software including but not limited to Microsoft Outlook and Word and Enterprise Resource Planning (ERP) systemsSkilled in adapting to a changing work environment and competing demandsSkilled in working independently and following through with assignments with minimal directionAbility to use Computer Aided Design (CAD) or related computer program editing softwareAbility to learn to use machines and tools, including their designs, uses, repair, and maintenanceAbility to deal with frequent change, delays or unexpected eventsAbility to read and interpret blueprintsAbility to organize work for timely completionAbility to follow oral and written instructionsAbility to establish and maintain effective and cooperative working relationships with those contacted in the course of workAbility to clearly communicate and understand information in English, both orally and in writingEducation:High SchoolExperience:1-4 yearsQualifications:High school diploma or GED; supplemented by some laser marking experience; or an equivalent combination of education, certification, training, and/or experience Several ways to Apply-*Apply in Person MONDAY- FRIDAY between the hours of 9:30am-1:30pm or call our office to schedule an appointment*4964 Tamiami Trail North, Naples FL 34103*Apply on line www.spherionjobcentral.com*Email your Resume by replying to this post*Call our office at 239-494-3044 for more informationSpherion_gtwb_naplesSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

We are looking for a Finishing Associate for a medical device company in Naples. Perform entry level work in finishing products. Uses gages, calipers and other measuring equipment to check and ensure part quality.Responsibilities:Reviews process Travelers to determine which activity to perform on unitsSelects tools to be used, utilizing knowledge of production requirementsEnsures that tools needed for each task are available at the work stationsInspects or measures finished work pieces to determine conformance to specifications, using measuring instruments such as gages or micrometersSets up, operates or tends grinding and related tools that remove excess material or burrs from surfaces; sharpens edges on corners or buffs, hones, or polishes work piecesSets and adjusts machine controls according to product specifications, utilizing knowledge of machine operationMeasures work pieces and lays out work, using precision measuring devicesWorking hours: Various Shifts AvailableSkills:Visually inspects units and separates those with defectsReworks defects by performing deburring, sandblasting, and tumbling activities; quarantines or rejects and reports units that cannot be brought into specifications to Quality Inspector or Quality designeeDelivers completed work to the lead worker in the unitStudies blueprints, work orders or machining instructions to determine product specifications, tool requirements, and operational sequencesPerforms a variety of tasks and operations to complete job(s); follows operating procedures consistentlyWorks in concert with the Quality department to ensure product integrityKeeps work area clean and tools orderlyEducation:High SchoolExperience:1-4 yearsQualifications:High school diploma or GED; supplemented by some previous experience; or an equivalent combination of education, certification, training, and/or experience.Knowledge and understanding of ISO 13485 and FDA 21CFR820 as it pertains to the job, on the job training providedSkilled in the use of computer software including but not limited to Microsoft Outlook and Word and Enterprise Resource Planning (ERP) systemsSkilled in working independently and following through with assignments with minimal directionAbility to learn the aspects of various finishing tasksAbility to deal with frequent change, delays or unexpected eventsAbility to read and interpret blueprintsAbility to organize work for timely completionAbility to follow oral and written instructionsAbility to establish and maintain effective and cooperative working relationships with those contacted in the course of workAbility to clearly communicate and understand information in English, both orally and in writingMust be able to work 1st or 2nd shift Several ways to Apply-*Apply in Person MONDAY- FRIDAY between the hours of 9:30am-1:30pm or call our office to schedule an appointment*4964 Tamiami Trail North, Naples FL 34103*Apply on line www.spherionjobcentral.com*Email your Resume by replying to this post*Call our office at 239-494-3044 for more informationSpherion_gtwb_naplesSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

We are working with a Naples Manufacturing Company to fill a Parts Painter position. This is a full time, Temp to Hire position and an excellent opportunity to work with a global leading Manufacturer.Responsibilities:. Responsible for the operation of manually operated hand painting equipment as well as automatic paint line for application of final finish to prescribed specifications 2. Sets up and operates automatic paint line and hand painting booths. Prepares sprayers for use and operates all equipment. 3. Selects and mixes coating liquid to produce desired properties and color. 4. Cleans and maintains all spraying equipment and brushes with solvent. 5. Heats and sprays wax onto products after they are tested. 6. Inspects work in process including paint thickness and documentationWorking hours: 7:30 AM - 3:30 PMSkills:While performing the duties of this job, the team member is required to walk, stand, and sit for extended periods of time. The team member is required to demonstrate manual dexterity and use hands to operate machinery. Specific vision abilities required by this job include close vision. Also expected of the team member is regular attendance, and the ability to work cooperatively and professionally with others. May be required to lift up to 50 lbsEducation:High SchoolExperience:1-4 yearsQualifications:1. 2 or more years prior directly related manufacturing process experience, or demonstrated ability to perform described responsibilities. 2. Proficient in reading, understanding and following follow blueprints, specifications, and verbal instructions. Able to perform basic mathematical calculations. Several ways to Apply-*Apply in Person MONDAY- FRIDAY between the hours of 9:30am-1:30pm or call our office to schedule an appointment*4964 Tamiami Trail North, Naples FL 34103*Apply on line www.spherionjobcentral.com*Email your Resume by replying to this post*Call our office at 239-494-3044 for more informationSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

We are seeking an Assembler/Tester for an Aerospace company in Naples.Accurately and efficiently assembles/tests a variety of moderately complex products to achievecustomer quality and on-time delivery schedules. May perform lockwiring, first stage subassembly, andfinal detailing functions. Works on products that contain mechanical components, single hydraulic systems,and multiple part numbers.Responsibilities:Performs moderately complex assembly/test functions utilizing mechanical skills, hand and powertools, mechanical/electronic tools, test equipment, assembly fixtures, and inspection measurement equipment in a manufacturing environment.Records test results on data forms using moderately complex electrical equipment and flow measurement devices. May use X Y recorders, oscilloscopes, transducers, and other related equipment.Identifies malfunctions disclosed by test data and reworks as instructed.Interprets blueprints, engineering orders, assembly routes, test specifications, service bulletins, customer requirements, and quality directives.Produces and inspects assemblies that conform to product specifications. Assembles, tests, and/orsolders to customer and/or industry standards.Performs touch up or full surface painting of parts with finishing materials such as paint, lacquer, glaze, etc. Mixes paint and cleans parts.Actively participates in lean initiatives by identifying and providing suggestions on areas for improvement.May assist in training less experienced team members.Observes all safety rules and maintains a foreign object damage (FOD) free work area.Ensures all equipment is calibrated in accordance with calibration schedule.May perform other related responsibilities.Working hours: 7:30 AM - 3:30 PMSkills:Possess strong mechanical reasoning.Able to implement and effectively apply lean initiatives.Possess effective interpersonal communication skills, as well as the ability to work in a team environment.Able to interpret reports and use standard business software applications. Able to use employee self-service to access on-line information and use specialized automated systems (i.e. PMR, TORS, e-mail).May require soldering certification per customer requirements.Ability to effectively demonstrate team member competencies and participate in goal setting, performance feedback, and self-development activities.Education:High SchoolExperience:0-1 yearsQualifications:Two or more years industry related experience in assembly/test in a manufacturing environment.Demonstrate product and process knowledge by applying it to newly learned techniques.Able to select appropriate procedures, techniques, tools, and equipment.Proficient in reading and understanding blueprints, route sheets, and test specifications. Perform basic mathematical calculations, as well as demonstrate effective verbal, written, and basic computer skills. Several ways to Apply-*Apply in Person MONDAY- FRIDAY between the hours of 9:30am-1:30pm or call our office to schedule an appointment*4964 Tamiami Trail North, Naples FL 34103*Apply on line www.spherionjobcentral.com*Email your Resume by replying to this post*Call our office at 239-494-3044 for more informationSpherion_gtwb_naplesSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by

Seeking a Machine Shop Operator for a manufacturing company here in Naples. This position performs light-duty machine setups and manufactures machined parts.Responsibilities:Operates basic light-duty machine tools such as small lathes, power mills, extruding machines, drills or punch presses, power breaks, grinders, et. al. following explicit instructions.May perform basic set up of CNC Milling/Lathe machines and run parts as needed.Inspect own work and perform quality checks to ensure conformance to engineering drawings.Accurately read and understand engineering drawings, CNC programs, and work instructions to ensure proper set up requirements, sequence operations, dimensions, and tolerance levels of finished product.Working hours: 7:30 AM - 4:30 PMSkills:Perform hand finishing including, for example, deburring, chamfering, and sanding both manually and/or with pneumatic/electric tools as required.Recommends changes to improves efficient and reduce costs.Adhere to AS9100 and ISO procedures and compliance.Complete all required trainings including but not limited to S.H.E. (Safety, Health, and Environmental), Ethics, Anti-Slavery and Human Trafficking, Quality and all performance/product related trainings.Additional duties, responsibilities and activities may be assigned or changed at any time with or without notice.Education:High SchoolExperience:1-4 yearsQualifications:Basic manual lathe and manual mill experience.Above average to expert knowledge of reading blueprints.Work in close tolerance + .0002 Lathes and + .0005 Mill.Ability to use measuring tools such as micrometers, verniers, and calipers.Self-starter capable of dealing with a variety of tasks in a fast paced, multi-tasking environment.High standard of attention to detail.Knowledge of cutting tools and machines throughout the department.Ability to multi-task, prioritize, and self-govern daily activities.Attention to detail and math skills required.Must have excellent people skills and communicate effectively.Understanding of ITAR and EAR regulations. Several ways to Apply-*Apply in Person MONDAY- FRIDAY between the hours of 9:30am-1:30pm or call our office to schedule an appointment*4964 Tamiami Trail North, Naples FL 34103*Apply on line www.spherionjobcentral.com*Email your Resume by replying to this post*Call our office at 239-494-3044 for more informationSpherion_gtwb_naplesSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

An exciting manufacturing company is looking for a Production Operator to join their 2nd shift team!Must be available to train on day shift for 1-2 weeks.Responsibilities:-Follows procedures, checklists, and safety protocols. -Build boxes, clean and maintain printers, keep track of tools and equipment and ensure all needed supplies are available. -Under the direct supervision of the Shift Supervisor the Production Operator is primarily responsible for the efficient operation of duties and responsibilities assigned in the operation of equipment. -Inspects and prepares product per SOPs --Threads and splices new material onto old, as required, and/or packages slits or handles material. --Sets up and adjusts equipment including, coaters, winding, finishing and other duties as assigned to maintain product quality. -Monitors equipment per requirements vs. schedule to assure efficient completion. -Records production and raw material usage manually and electronically per SOPs. -Cleans machinery, equipment and work area as scheduled and as needed -Communicates and cooperates with other crew member to maintain quality, operational efficiency and safety. -Identifies and labels hazardous waste materials for proper disposal. -Recommends and implements methods to increase the quality of products and/or services -Ability to serve on Teams for quality, safety, waste reduction and lean principles. -Participates in self-development activities and training of others. -Exhibits safety awareness and safe work practices. -Performs other related duties as may be reasonably assigned in the course of business. -Exhibits good environmental practices and procedures consistent with job(s) performed and EMS (Environmental Management System) requirements.Working hours: 3:00 PM - 12:00 AMSkills:-Ability to stand on feet for entire shift-Ability to lift up to 50 lbs-Basic reading, writing, and arithmetic skills required.-Manual dexterity required for operating machinery and computers-Able to operate independently and as a member of a team. -Able to read and follow SOPs, labels, and instructions. -Ability to use computer and internal software systems to input dataEducation:High SchoolExperience:1-4 yearsQualifications:- High School Diploma/GED Required-Previous manufacturing experience a plus i.e. production environment.-Steel Toe Boots required Apply Now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Looking for experienced warehouse workers/assemblers to join a productive team in the Bartow area!Schedule: Monday - Friday 7:00am - 5:00pm*Employer conducts pre-employment drug screening.*Responsibilities:Maintain a pace staying ahead of the assembly line Read and understand paperwork and understand company's picking policies Keep pace and stage 1/2 day ahead of line Install appropriate hinges Hinge defective free doors Proper placement of hinges Doors clean and defect free when leaving station All appropriate items and proper paperwork are on the cart for assembly lineMust comply with general company policies and expectations in the areas of Attendance, Safety, Cleanliness, and Team AttitudeWorking hours: 7:00 AM - 4:30 PMSkills:- Ability to use basic hand tools- Ability to read a tape measure- Ability to stand on feet for long periods of time- Ability to work in a non-climate controlled environmentEducation:High SchoolExperience:0-1 yearsQualifications:- Previous warehouse experience is a plus- Previous assembly experience is a plus- Reliable transportation to and from work Apply Now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

The Downline Operator operates, monitors, maintains, and troubleshoots all down line equipment for ULF operations. Tests, communicates results, and documents results of quality testing of all ULF product to assure quality requirements are met. Transfers packaged materials to maintain warehouse FIFO protocols and assists in loading trucks with product for transport to client. Reports any potential discrepant material to Team Leader and provides fiber properties and characteristics for process adjustments to be made. Works to assure maximized quality and safety during operations. Notifies Team Leader to any equipment, quality, or operational complications needing resolution and takes corrective actions within scope of the Downline Operator role.*Swing Shift Schedule - 12 hour shifts - Must be available to work days and nights - Must be available to work weekends*Responsibilities:- Place bags on bagger equipment snouts to assure proper packaging- Assure proper bag labeling and placement- Maintain inkjet label printer and stretch wrapping equipment- Demonstrate competency in forklift safe operation- Assist in line clean out to assure optimized airflow through transport lines- Maintain consistent bag weights per product specification between bagger equipment- Assign programs and troubleshoot bag placing robot as required to assure smooth operation in the downline area- Notes any process abnormalities and notifies Team Leader to initiate corrective action- Increase technical aptitude of the fiberglass manufacture process to increase capabilities and understanding of operation- Transfer packaged product from operations floor to warehouse throughout operations- Assures clean and orderly housekeeping in all assigned areas at all timesWorking hours: Various Shifts AvailableSkills:- Must be able to read, write, and speak English- Must be able to understand verbal and written instructions- Must possess strong communication skills- Must have the ability to multi-task- Must work well in team environment- Must have the ability to execute basic mathematical calculations- Must have problem solving skills- Must demonstrate initiative and a quality work ethic- Must be able to work independentlyEducation:High SchoolExperience:1-4 yearsQualifications:- Minimum high school diploma or equivalent is required- Must be able to pass pre-employment drug screening and national background check- Related experience and/or industrial training in an industrial environment- Must be able to work in temperature extremes- Steel Toe Boots required- Must be able to lift/carry/move up to 50 pounds- Demonstrate good attendance and punctuality- Must be able to work 12 hours shifts- Must be able to work days and nights (swing shift)- Must be able to work weekends Tired of always applying online? Come see us during our Walk-In Interview HoursTuesday - Thursday 10:00am - 3:00pmSpherion Staffing1925 E Edgewood DrSuite 102Lakeland, FL 33803Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Spherion is still hiring and assisting essential businesses during this time of need. In the coming weeks, a leading Electrical Connector Manufacturer is looking to add to their team ASAP on 2nd and 3rd shift. You will be responsible to assemble parts in a manual, hand-assembly environment. You will be responsible for safety checks, logging orders into the database, and inspecting parts for quality.2nd Shift: 2:30PM - 10:30PM $13/Hr, 3rd Shift: 10:30PM - 6:30AM $13.50/HrResponsibilities:Able to accurately produce parts by operating all manual work cells and able to achieve a minimum productivity rate of 90%.Perform quality checks, audits and inspections to ensure products are defect free. Follow established process and procedures to achieve 0 quality defects.Follow standard work procedures before, during and at the end of the shift as defined by the department guidelines.Including but not limited to station set up and clean up.Accurately transact job in database system Maintain all equipment and tools within the workstation as required by the preventative maintenance schedules.Follow all safety procedures and facility safety guidelines.Participates in 5S and safety activitiesCompleting daily inspections for quality of assembled cartsWorking hours: 2:30 PM - 10:30 PM (Various Shifts Available)Skills:Able to learn to use measuring instruments (calipers, measuring tape, rulers)High level of attention to detail requiredExcellent hand dexterity to handle small parts and hand toolsEducation:No Degree RequiredExperience:0-1 yearsQualifications:High School Diploma or equivalent0-1 years experience in assembly environment requiredAble to work well in a team environment - requiredMust be able to sit or stand intermittently for up to 8 -12 hours dailyMust be able to bend, twist, push, pull, and lift products varying in weight. Products 50lbs or less unassisted, products more than 50lbs assisted Able to follow all safety standards and use PPE as assigned for each stationAbility to submit to full background check and drug screen Apply online and meet our team!Weekly Open House Interviews | Every Monday & Wednesday | 8:30AM - 10:00 AMSpherion Staffing 33 Ponce de Leon Blvd | Brooksville FL 34601Can't make it to open house interviews? No problem! Give us a call at 352-796-6000 to schedule an in-person!Email me at ryanhill@spherion.com for immediate considerSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Spherion Staffing is hiring for the leading manufacture of hundreds of meat and poultry products that can be found in well-known grocery stores and top restaurant chains nationwide. Come work for The Surprisingly Big Company-, right in your backyard.We want you to be part of an exciting, collaborative team environment!As General Labor, the positions include a variety of manual or tool-assisted, repetitive tasks to produce raw and ready-to-eat products. You may be offered a position in a number of different departments. Jobs may include harvest, deboning, trimming, binning, or packaging.There are two shifts available: Days 5:30 AM - 3:30 PM Mon-Fri Every other Sat. - Starting pay $15.50/hr Swings 2:00 PM - 10:30 PM Mon-Fri Every other Sat. - Starting Pay $17.00/hrYou also will qualify for a free $60 gas bonus on your first 3 weeks starting this position!Responsibilities:Job Requirements? No previous experience is necessary.? Ability to work in varying temperature conditions.? Ability to lift up to 50 pounds including above head and below the waist.? Ability to stand for long periods.? Must be able to work at line speed with the ability to make coordinated hand and finger movements.? Must be able to work overtime and/or weekends as needed.? Experience in food manufacturing or processing is a plus.? Ability to adjust quickly to changing demands.? Candidates must successfully pass post-offer/pre-employment drug test, background screen, and physical.Working hours: 7:00 AM - 3:30 PM (Various Shifts Available)Skills:Entry Level No Experience neededEducation:No Degree RequiredExperience:0-1 yearsQualifications:Must be able to stand for full shift. Call to Action:To apply Call or Text 801-528-1801Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

We are hiring a Production Worker to join our team! You will-operate machinery and equipment, as well as identify areas of improvement to increase efficiency.-Responsibilities:Operate maintain and clean manufacturing machinery and equipmentTroubleshoot mechanical failuresComplete work orders and requests in a timely fashionPerform preventative maintenanceAdhere to safety policies and proceduresWorking hours: 5:00 AM - 3:30 PMSkills:Must be able to stand for entire shift.Must be able to communicate in English.Education:No Degree RequiredExperience:0-1 yearsQualifications:Previous experience in production, manufacturing or other related fieldsFamiliarity with schematics and technical drawingsFamiliarity with manufacturing machinery and equipmentAbility to handle physical workload Please apply and then call or text 801-221-0550 to schedule an interview.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

We are looking for an experienced electronics assembler.4 day work week. Shift is Mon-Thurs 8 am-6 pm.Responsibilities:Assemble electrical or electronic systems or support structures and install components, units, subassemblies, wiring, or assembly casings, using rivets, bolts, soldering or micro-welding equipment. Build products such as electric motors, computers, electronic control devices, and sensing equipment.Working hours: 8:00 AM - 6:00 PMSkills:solderingEducation:No Degree RequiredExperience:0-1 yearsQualifications:We are looking for someone with previous electronics assembly experience. We can train on our specific product. Please apply online and then call or text 801-221-0550 to schedule an interview.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

EXCELLENT OPPORTUNITY FOR ASSEMBLY MANUFACTURING WORKERS!*Don't miss this OPPORTUNITY to work with an award winning leader in the Nature Coast area!Spherion, in partnership with our client company, is seeking dependable, hardworking individuals for assembly positions in BrooksvilleTemporary & Temp-to-Perm | $14.50 Per Hour | Spherion benefits available after first 30 days on an assignment | Career with benefits available after permanent placement with clientFull Time | Mon - Thurs 6a - 4:30p | 2x paid 10min breaks & 1x unpaid 30min lunchAll qualified applicants must meet Spherion's required pre-employment screenings.Responsibilities:- Study, read and interpret drawings, schematics, and other assembly instructions and work orders- Assemble parts and components by examining the connections for correct fit- Verify specifications- Resolve assembly problems- Maintain clean work space- Maintain inventory, verify receipt of supplies, follow procedures and policies to replace and replenish parts & consumable items.- Follow all routes, process times and notify supervisors to meet deadlines- Maintain daily production logs and documentationWorking hours: 6:00 AM - 4:30 PMSkills:- Basic Computer skills- Ability to stand for full 10 hour shift- Perform repetitive tasks- Apply common sense to carry out detailed written and oral instructions- Experience with controls, instrumentation, manufacturing, quality control, tooling, safety management, and sound judgement- Safety Shoes required, steel toed OR composite is required- Lift up to 50-60lbs unassisted- Absolutely no cell phones allowed on floor, not allowed on bodies. Must be kept in their car or in a locker that can be assigned to them for free- MP3 players are allowed with one earbud only, and must be kept at a volume where they can still hear for safety reasons- Stand for full shift- Cross train where needed in assembly and basic production areas- Excellent hand dexterity to handle small parts and hand toolsEducation:High SchoolExperience:0-1 yearsQualifications:-High School Diploma or equivalent-0-1 years experience in assembly environment required-Able to work well in a team environment - required-Must be able to sit or stand intermittently for up to 8 -12 hours daily-Must be able to bend, twist, push, pull, and lift products varying in weight. Products 50lbs or less unassisted, products more than 50lbs assisted -Able to follow all safety standards and use PPE as assigned for each station-Ability to submit to full background check and drug screen -Apply online and meet our team!-Weekly Open House Interviews | Every Monday & Wednesday | 8:30AM - 10:00 AM-You can text JOBS to 352-796-6000 as well-Spherion Staffing 33 Ponce de Leon Blvd | Brooksville FL 34601-Can't make it to open house interviews? No problem! Give us a call at 352-796-6000 or email me at ryanhill@spherion.com to schedule an in-person!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

We are currently hiring for two Dispatchers. This position will be planning and execution of all dispatch supply chain functions in the most efficient; cost effective manner that results in exceptional service to members and customers5 days on/2 days off - Wednesday-Sunday - day/mid-shift (9am-7pm)4 days on/3 days off - Wednesday-Saturday - night shift (7pm-7am)Starting Pay Rate $17/hrResponsibilities:? Effective & efficient planning, coordination, and execution of drivers and equipment to assigneddestination; prepares daily, detailed shift/status reports.? Coordinates, plans, and executes routes/deliveries in accordance to customer times, Pasteurized MilkOrdinance (PMO) standards, SMI policies and procedures, & DOT compliances.? Provides consistent and exceptional service to all internal and external customers.? Demonstrates understanding of the functionality of SMI Trucking computer database and other relatedcomputer systems.? Other related duties as assigned.Working hours: 7:00 PM - 7:00 AMSkills:- May be required to sit or stand for extended periods of time and demonstrate manual dexterity whileperforming job duties.- The employee will continuously sit, stand, walk, handle, talk, see, and hear.- Must be able to concentrate for extended periods of time, paying attention to detail.- Requires constant operation of standard office machines, including computer and telephone.- Requires frequent ability to move freely about the office building.Education:High SchoolExperience:1-4 yearsQualifications:? Environment involved is mostly inside the office; some time may be required outdoors; occasionallyexposed to cold, extreme heat, cluttered floor surfaces, contact with sharp objects, contact with skinirritants, hazardous cleaning solutions, hazardous equipment (mechanical moving parts), and nuisancedusty, fumes, and sprays.? The noise level in the work environment is usually moderate. Please apply today! Don't wait.Text 'Dispatch' to 352-622-5273spherion_gtwb_ocalaSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

1 for 3rd shift (Monday - Thursday from 11pm to 7am) $15.81Operates machining centers, turning centers, centerless grinders and hand operations, by performing the following essential duties and responsibilities, but not limited to the followingResponsibilities:Will include, but not limited to the following areas:Perform change overs and operate work centers as instructed by the Production Team Leader.Setup and operate drill presses, hones and other hand and power tools. Look for and suggest improvements to processes and operations to the Production Team Leader.Seek assistance from a CNC Lead Setter when production issues arise.Monitor quality per ISO work instructions.Perform tool offset adjustments and tool changes as needed to maintain required quality of parts.Pack parts properly to prevent damage during transportation to next operation.Create Documents Change Request (DCR) using kbox when needed to correct or upgrade process documentation.Interpret blueprint and job specifications to determine dimensions and tolerances.Perform inspections and tests to ensure parts meet the quality dictated by associated technical documents.Operate equipment per written instructions.Read and operate inspection equipment to insure a quality product at all times.Assigned work area, tools and gauges will be clean, and kept neat, safe and orderly at all times.Follow all company policies and procedures and applicable laws.Will work overtime as requested by supervisor.Recognize and comply with all safety rules. Hearing and Eye protection will be worn when required.Working hours: Various Shifts AvailableSkills:TRAINING / SAFETY REQUIREMENTS:Employees must complete general safety training such as Right to Know (includes: Hazardous Communication, Emergency Response Plan, AWAIR, and Forklift & Pedestrian Safety) annually. The employee must follow the rules stated in our safety policies and programs including but not limited to the Shop Safety rules. The employee is to report any unsafe conditions, unsafe acts, near misses, illnesses, and injuries to their supervisor immediately.EDUCATION and/or EXPERIENCE: High School Diploma or GED.LANGUAGE SKILLS: Ability to read English and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. MATHEMATICAL SKILLS:Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent).REASONING ABILITY: Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. OTHER SKILLS and ABILITIES: Ability to read blue prints and precision measuring tool/instruments. Ability to operate a computer and have working knowledge of Microsoft Word and Excel. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel objects, tools, or controls; and talk or hear. The employee is occasionally required to walk and reach with hands and arms.The employee must occasionally lift and/or move up to 50 pounds. The employee is required to request assistance for anything exceeding 35 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.Education:High SchoolExperience:1-4 yearsQualifications:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Don't Wait! Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

We are looking for an Executive Assistant to perform a variety of administrative tasks and support our company's senior-level managers.Executive Assistant's responsibilities include managing calendars, making travel arrangements and preparing expense reports.Responsibilities:Point of contact among executives, employees, clients and other external partners.Manage information flow in a timely and accurate mannerManage executives??? calendars and set up meetingsMake travel and accommodation arrangementsRack daily expenses and prepare weekly, monthly or quarterly reportsOversee the performance of other clerical staffAct as an office manager by keeping up with office supply inventoryFormat information for internal and external communication ??? memos, emails, presentations, reportsTake minutes during meetingsScreen and direct phone calls and distribute correspondenceOrganize and maintain the office filing systemWorking hours: 8:00 AM - 5:00 PMSkills:Excellent MS Office knowledge Outstanding organizational and time management skillsFamiliarity with office gadgets and applications (e.g. e-calendars and copy machinesEducation:High SchoolExperience:1-4 yearsQualifications:Excellent verbal and written communications skillsDiscretion and confidentiality Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Spherion is looking fro reliable Molding Production Operator for RGV Area. SOme industrial experience is required to start a great career here.Responsibilities:Oversee machinery for operationStart machinery and make adjustments to machinery when necessary to improve performanceReport troubleshoot issues and perform maintenancePerform quality control, follow reporting and recordkeeping procedures, and report problems to supervisorComply with all safety and health regulationsClean machinery and maintain cleanliness in work areaFollow Safety rules all the timeFollow all the SOP for a successWorking hours: 6:00 PM - 6:00 AMSkills:Must be detail-orientedUnderstanding of production and plant processesAnalytical and numerical skills: ability to perform mathematical calculations (add, subtract, multiply, divide) in different units of measurementAbility to follow written and oral instructionsAbility to work in a teamAbility to lift heavy equipment, to bend, and to stand or walk for long periods of timeWillingness to work in shifts (late or early hours, weekends, and overtime if necessary)Education:High SchoolExperience:0-1 yearsQualifications:High School Diploma or GED1-2 Years of Industrial Experiences ( Preferably Manufacturing) Previous machine operating experience in a manufacturing facility, or similar relevant experience Apply online at : www.spherion.com/applySpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

The Assembler is responsible to ensure that assigned parts are assembled in accordance with production guidelines. Ensure that all parts fit correctly and are suitable for the final product.3RD SHIFT 6:00PM-6:00AMResponsibilities:Reads work instructions and follow established procedures.Aligns material and put together parts to build complex units.Performs visual Inspections to identify specific defects according to work instructions.Complete appropriate reports as required.Rejects components that don'tt meet the quality criteria as indicated in work instructions.Ensure that sub-assembly packs are placed in the pallet(fixture), separately, to prevent any damage.Rework defective product as instructed as excess of plastic by using heat guns, pliers, utility knives, etc.Perform all work in accordance with quality standards and established safety procedures.Provide support on other positions within the area. Participate in cross-training activitiesEnsure the use of personal protective equipment.Report on issues, malfunction or defective parts.Maintain a clean, organize and safe work area.Other duties may be assigned to meet the business needs.Working hours: 6:00 PM - 6:00 AMSkills:Previous experience as assembler.Previous experience working in a manufacturing environment preferred.Must be able to read, interpret and follow work instructions, drawings, directions, etc.Excellent hand-eye coordination and physical condition.Great manual dexterity to put parts or pieces together quickly and accurately.High attention to detail and self-motivation skillsAbility to multitaskAble to work in a fast pace environmentEducation:High SchoolExperience:0-1 yearsQualifications:High School diploma or GED required1+ Years of experience in Manufacturing Environment ( Required) 1+ Years of experience in assembly line ( Desired) Apply online : www.spherion.com/applySpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

Spherion Staffing has several openings for General Assembly associates on 1st shift and 2nd Shift. These positions will provide assembly of parts following blueprints or layouts, quality control of finished units and support shipping and receiving functions in this production environmentQualified applicants should have previous manufacturing or assembly experience and be able to lift up to 40 poundsPay $15.50/hour1st Shift: Monday-Friday 7 am -3 pm2nd Shift: Monday-Friday 3 pm - 11 pmResponsibilities:-Set up, assemble, repair, test and package final and sub-assemblies -Maintain required work quality and output at all work stations and assembly lines-Operate test equipment to ensure product meets all required test specifications, document and report any discrepancies -Monitor daily quality of assemblies and report all problems/discrepancies -May be required to train or direct work of co-workers -Maintain and report inventory accuracy -Maintain housekeeping and organization of the department and work area -May be required to sweep area, haul trash and perform minor maintenance of certain pieces of equipment-Perform other duties as assigned, including shipping/receiving functions, material handler etc.Responsibilities:See AboveWorking hours: 7:00 AM - 3:00 PMSkills:Requirements:-Must have a high school diploma or equivalent-Must be able to stand/walk/sit, for up to eight hours-Ability to lift up to 40 lbs-Should have good computer skills -Must have a good understanding of blue prints and operation layouts-Previous manufacturing and/or assembly experienceEducation:High SchoolExperience:1-4 yearsQualifications:See Above To be considered, please apply online at www.spherion.com/apply If you have any questions please contact Greg Stafford at 605-335-6010Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.