You are successfully logged out of your my randstad account

You have successfully deleted your account

    Thank you for subscribing to your personalized job alerts.

    15 jobs found for Education

    Filter2
    Clear all
      • Lebanon, Indiana
      • Permanent
      • $85,000 - $100,000 per year
      • Various Shifts Available
      Spherion is hiring a Maintenance and Reliability Engineer in Lebanon, IN. If you like traveling, this is the position for YOU!- Up to 80% travel- Bonuses- Opportunity to make your mark as a member of an Industry Leading company!Shift:Not a 40 hour a week shift, early starts/late finishes-closer to 60-70 hours a week with a lot of travel required, 80% travelPay: $85k - $100k + 15% BonusResponsibilities:Develop and support Maintenance Reliability Engineers Network/ enhance and roll out good practices/preventative and predictive maintenance across Division along with the implementation of SAP PM.Ensure good practices for all areas that preserve our assets functionality, reliability and integrity are developed and embedded within each site to deliver quicker on time in full, consistent qualitative and stronger products. Transfer Technical knowledge and support development of the organization, methods & tools towards more proactive (condition based) maintenance approach.Work with sites Maintenance Departments leads and Reliability Engineers in the roll out of these practices to prioritize maintenance work and improve reliability of our assets. Support complex troubleshooting and benchmark asset performance while developing the organization root cause analysis capabilities.Working hours: Various Shifts AvailableSkills:Education & Certicications:Master degree (preferable engineering, technology, process) or equivalent via experience.H&S (IOSH Managing Safely)Job Specific Technical Requirements:Corrugator or Converting Manufacturing Processes experienceEngineering qualificationsAdvocate for lean principles, proven lean transformation experience/ experience in lean change management & TPM ImplementationPassion for continuous improvement and strong will to deliver resultsAnalytical and conceptual skillsEducation:BachelorsExperience:1-4 yearsQualifications:Minimum 5 years in a position in a corrugated manufacturing environment (Engineering/Maintenance)Ability to work in/with/between various culturesProven experience in project management, project management skillsGood communication skills, able to work in a systematic and rigorous wayWorks collaboratively with others. Inspires to a common purpose.Strong leadership and coaching skills with the proven ability to set a vision, manage change, strategically plan for continuous improvement and the ability to influence people at all levels within the organizationFluent in English. Knowledge of other languages is a plus. Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is hiring a Maintenance and Reliability Engineer in Lebanon, IN. If you like traveling, this is the position for YOU!- Up to 80% travel- Bonuses- Opportunity to make your mark as a member of an Industry Leading company!Shift:Not a 40 hour a week shift, early starts/late finishes-closer to 60-70 hours a week with a lot of travel required, 80% travelPay: $85k - $100k + 15% BonusResponsibilities:Develop and support Maintenance Reliability Engineers Network/ enhance and roll out good practices/preventative and predictive maintenance across Division along with the implementation of SAP PM.Ensure good practices for all areas that preserve our assets functionality, reliability and integrity are developed and embedded within each site to deliver quicker on time in full, consistent qualitative and stronger products. Transfer Technical knowledge and support development of the organization, methods & tools towards more proactive (condition based) maintenance approach.Work with sites Maintenance Departments leads and Reliability Engineers in the roll out of these practices to prioritize maintenance work and improve reliability of our assets. Support complex troubleshooting and benchmark asset performance while developing the organization root cause analysis capabilities.Working hours: Various Shifts AvailableSkills:Education & Certicications:Master degree (preferable engineering, technology, process) or equivalent via experience.H&S (IOSH Managing Safely)Job Specific Technical Requirements:Corrugator or Converting Manufacturing Processes experienceEngineering qualificationsAdvocate for lean principles, proven lean transformation experience/ experience in lean change management & TPM ImplementationPassion for continuous improvement and strong will to deliver resultsAnalytical and conceptual skillsEducation:BachelorsExperience:1-4 yearsQualifications:Minimum 5 years in a position in a corrugated manufacturing environment (Engineering/Maintenance)Ability to work in/with/between various culturesProven experience in project management, project management skillsGood communication skills, able to work in a systematic and rigorous wayWorks collaboratively with others. Inspires to a common purpose.Strong leadership and coaching skills with the proven ability to set a vision, manage change, strategically plan for continuous improvement and the ability to influence people at all levels within the organizationFluent in English. Knowledge of other languages is a plus. Apply Today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Florien, Louisiana
      • Permanent
      • $65,000 - $117,000 per year
      • 8:00 AM - 8:00 PM
      Spherion is currently recruiting for our client in the business of manufacturing wood products and distributors building materials over half a century. Today this client of one of the largest manufacturers of plywood and engineered wood products in North America- and the only wholesale stocking distributor for building productions that can service the entire United States. This company believes in investing in their employees and they offer a great benefit package that impacts positively in all areas of life; from heath and well-being, career, community, to financial security and personal safety. Benefits include: - Relocation location and/or sign-on bonus up to $5K(Not grossed up)- Medical + Prescription Drug- Dental + Vision- 401 (k) Retirement SavingsThis is an opportunity that is an exciting fast-paced engineering project management role that will allow you to have a significant impact on the output and effectiveness of multiple manufacturing facilities. You will engage with employees and leaders at all levels of the organization and make a huge impact to the quality and innovation of the products delivered to customers.Responsibilities:Responsibilities will include but not be limited to: - Provide engineering leadership and support, including the planning, design,installation and optimization of new and existing equipment and processes. - Will work with production and staff personnel to investigate, analyze and plan actions to correct engineering-related production issues.- Will lead project teams- No direct reports- Breaking down to finished products- Reading Schematics- Process- Will be in charge of third party contractors- 30% Regional Travel within LouisianaWorking hours: 8:00 AM - 8:00 PMSkills:- MS Office Skills- AutoCAD design skillsEducation:MastersExperience:7-10 yearsQualifications:- 8+years Manufacturing experience- Minimum Bachelors Degree in Electrical, Mechanical Industrial- Preferred Education: P.E. and/or Masters Degree in Engineering (Electrical < mechanical or industrial) Apply online www.spherion.com. Once application submitted call our office at 318-445-9000.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is currently recruiting for our client in the business of manufacturing wood products and distributors building materials over half a century. Today this client of one of the largest manufacturers of plywood and engineered wood products in North America- and the only wholesale stocking distributor for building productions that can service the entire United States. This company believes in investing in their employees and they offer a great benefit package that impacts positively in all areas of life; from heath and well-being, career, community, to financial security and personal safety. Benefits include: - Relocation location and/or sign-on bonus up to $5K(Not grossed up)- Medical + Prescription Drug- Dental + Vision- 401 (k) Retirement SavingsThis is an opportunity that is an exciting fast-paced engineering project management role that will allow you to have a significant impact on the output and effectiveness of multiple manufacturing facilities. You will engage with employees and leaders at all levels of the organization and make a huge impact to the quality and innovation of the products delivered to customers.Responsibilities:Responsibilities will include but not be limited to: - Provide engineering leadership and support, including the planning, design,installation and optimization of new and existing equipment and processes. - Will work with production and staff personnel to investigate, analyze and plan actions to correct engineering-related production issues.- Will lead project teams- No direct reports- Breaking down to finished products- Reading Schematics- Process- Will be in charge of third party contractors- 30% Regional Travel within LouisianaWorking hours: 8:00 AM - 8:00 PMSkills:- MS Office Skills- AutoCAD design skillsEducation:MastersExperience:7-10 yearsQualifications:- 8+years Manufacturing experience- Minimum Bachelors Degree in Electrical, Mechanical Industrial- Preferred Education: P.E. and/or Masters Degree in Engineering (Electrical < mechanical or industrial) Apply online www.spherion.com. Once application submitted call our office at 318-445-9000.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Niles, Michigan
      • Permanent
      • $50,000 - $60,000 per year
      • 6:30 AM - 3:00 PM
      Spherion is looking for a CAD Designer in Niles, MI!The CAD Designer is responsible for drafting/drawling product and component revisions and working with Engineers to design and prepare new products for production.This position is DIRECT HIRE and pay is determined by experience ranging from $50,000-$60,000 annually.Please call/text Spherion at 574-282-2761 for more information on this position!Responsibilities:-Prepare CAD models and drawings for production. May include drawing creation, updates, checking, releasing, and/or managing of revisions.-Analyze and resolve manufacturing & technical issues for components and products.-Assist with creation and updating of bills and material.-Assist with engineering publications and communication. May include writing of instruction sheets and manuals, measuring and recording information for specification sheets, and communicating relevant information to others.-Interface with other departments to accomplish project and product goals.Working hours: 6:30 AM - 3:00 PMSkills:-Self-motivated and detail oriented-Great Interpersonal and communication skills-Ability to investigate and analyze problemsEducation:AssociateExperience:1-4 yearsQualifications:-Associates Degree or equivalent from two-year college or technical school; or one year related experience and/or training; or equivalent combination of education and experience is required.-Experience with 2D drafting, drafting standards and best practices is required.-Experience with 3D CAD systems (preferably Autodesk Inventor) is required-Experience with Geometric Dimensioning & Tolerancing Call/Text Spherion at 574-282-2761 to be considered for this great opportunity!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is looking for a CAD Designer in Niles, MI!The CAD Designer is responsible for drafting/drawling product and component revisions and working with Engineers to design and prepare new products for production.This position is DIRECT HIRE and pay is determined by experience ranging from $50,000-$60,000 annually.Please call/text Spherion at 574-282-2761 for more information on this position!Responsibilities:-Prepare CAD models and drawings for production. May include drawing creation, updates, checking, releasing, and/or managing of revisions.-Analyze and resolve manufacturing & technical issues for components and products.-Assist with creation and updating of bills and material.-Assist with engineering publications and communication. May include writing of instruction sheets and manuals, measuring and recording information for specification sheets, and communicating relevant information to others.-Interface with other departments to accomplish project and product goals.Working hours: 6:30 AM - 3:00 PMSkills:-Self-motivated and detail oriented-Great Interpersonal and communication skills-Ability to investigate and analyze problemsEducation:AssociateExperience:1-4 yearsQualifications:-Associates Degree or equivalent from two-year college or technical school; or one year related experience and/or training; or equivalent combination of education and experience is required.-Experience with 2D drafting, drafting standards and best practices is required.-Experience with 3D CAD systems (preferably Autodesk Inventor) is required-Experience with Geometric Dimensioning & Tolerancing Call/Text Spherion at 574-282-2761 to be considered for this great opportunity!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Orem, Utah
      • Temp to Perm
      • $35,000 - $45,000 per year
      • 6:00 AM - 5:00 PM
      We are looking for an experienced engineering lab technician. Schedule is Mon-Thurs. Must be present from 9 am- 3 pm. You may come in earlier or stay later to reach 10 hours per day.Responsibilities:Mechanical assembly of electronic devices using torque drivers and other manual toolsElectrical assembly of wiring harnesses using crimping tools and soldering techniques as neededFollow assembly instructions from engineering staff in either written or verbal formAssist in troubleshooting electronic assemblies and in documenting the final state of assembliesAssemble electronic systems support structures and install components, units, subassemblies, wiring, or assembly casings, using rivets, bolts, soldering or micro-welding equipment. Build products such as electric motors, computers, electronic control devices, and sensing equipment.Working hours: 6:00 AM - 5:00 PMSkills:SolderingEducation:No Degree RequiredExperience:0-1 yearsQualifications:We are looking for someone with previous experience assembling electronic devices. We can train on our specific product. Please apply online and then call or text 801-221-0550 to schedule an interview.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We are looking for an experienced engineering lab technician. Schedule is Mon-Thurs. Must be present from 9 am- 3 pm. You may come in earlier or stay later to reach 10 hours per day.Responsibilities:Mechanical assembly of electronic devices using torque drivers and other manual toolsElectrical assembly of wiring harnesses using crimping tools and soldering techniques as neededFollow assembly instructions from engineering staff in either written or verbal formAssist in troubleshooting electronic assemblies and in documenting the final state of assembliesAssemble electronic systems support structures and install components, units, subassemblies, wiring, or assembly casings, using rivets, bolts, soldering or micro-welding equipment. Build products such as electric motors, computers, electronic control devices, and sensing equipment.Working hours: 6:00 AM - 5:00 PMSkills:SolderingEducation:No Degree RequiredExperience:0-1 yearsQualifications:We are looking for someone with previous experience assembling electronic devices. We can train on our specific product. Please apply online and then call or text 801-221-0550 to schedule an interview.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Brownsville, Texas
      • Permanent
      • $90,000 - $115,000 per year
      • 8:00 AM - 5:00 PM
      Minimum Education, Experience and Core Competency Requirements: Bachelor’s Degree in engineering/business/management or other related field, with 5-8 years relevant experience, OR Associate’s degree with 8-10 years relevant experience and supervisory experience across multiple business functions, 5-10 years’ experience in coaching the implementation of a lean immersion processes with demonstrated competency in lean tools, philosophies, and principlesDemonstrated strong team leadership and team building skillsStrong written and oral communication skillsEffective presentation skillsDemonstrated ability to coach, mentor and motivate employees through interpersonal and lean techniquesDemonstrated team building and development experienceStrong analytical and problem solving skills; able to make simple, meaningful conclusions from complex data, and a successful history of problem solvingDemonstrated success in meeting goalsSelf-motivated and able to work independently and with minimal direction from the Director and Vice PresidentMust be willing to develop a strong understanding of lean concepts and have the aptitude to build a deep understanding and ability to apply these concepts through Lean tools  Skills:Culture BearerLean/TPS System methodology and thinkingEstablishes and maintains positive employee relationshipsFocuses on team building amongst the departmentExhibits the traits of the 7 Habits culture with emotional intelligence and maturityExhibits the traits of a servant leaderShares and promotes team successesValues the Triple Bottom Line (TBL); People, Planet, ProfitValues people regardless of their backgroundDisplays high moral and ethical standards and a high level of integrityIncorporates the company vision and values into daily activities and behaviors; help others to become and remain motivatedGives timely and appropriate performance feedback for individuals or teamsLeads Gemba activities, Coaches Gemba Managers and teams through Strategy Deployment and continuous improvement events and activitiesMission A3, VSA, Core Team Development, RIE, etc.
      Minimum Education, Experience and Core Competency Requirements: Bachelor’s Degree in engineering/business/management or other related field, with 5-8 years relevant experience, OR Associate’s degree with 8-10 years relevant experience and supervisory experience across multiple business functions, 5-10 years’ experience in coaching the implementation of a lean immersion processes with demonstrated competency in lean tools, philosophies, and principlesDemonstrated strong team leadership and team building skillsStrong written and oral communication skillsEffective presentation skillsDemonstrated ability to coach, mentor and motivate employees through interpersonal and lean techniquesDemonstrated team building and development experienceStrong analytical and problem solving skills; able to make simple, meaningful conclusions from complex data, and a successful history of problem solvingDemonstrated success in meeting goalsSelf-motivated and able to work independently and with minimal direction from the Director and Vice PresidentMust be willing to develop a strong understanding of lean concepts and have the aptitude to build a deep understanding and ability to apply these concepts through Lean tools  Skills:Culture BearerLean/TPS System methodology and thinkingEstablishes and maintains positive employee relationshipsFocuses on team building amongst the departmentExhibits the traits of the 7 Habits culture with emotional intelligence and maturityExhibits the traits of a servant leaderShares and promotes team successesValues the Triple Bottom Line (TBL); People, Planet, ProfitValues people regardless of their backgroundDisplays high moral and ethical standards and a high level of integrityIncorporates the company vision and values into daily activities and behaviors; help others to become and remain motivatedGives timely and appropriate performance feedback for individuals or teamsLeads Gemba activities, Coaches Gemba Managers and teams through Strategy Deployment and continuous improvement events and activitiesMission A3, VSA, Core Team Development, RIE, etc.
      • Montgomery, Alabama
      • Permanent
      • $65,000 - $95,000 per year
      • 7:30 AM - 4:30 PM
      The Electrical Engineer will work independently on highly engineered, heavy equipment products in order to meet customer specifications and requirements. The individual in this position is expected to evaluate, select, and apply standard engineering techniques, procedures, and criteria using sound judgment in design and modification of mobile construction equipment. On-site engineering capabilities include structural, mechanical, electrical, fluids, and powertrain design work.Responsibilities:- Performing the design, analysis, testing and documentation of mobile equipment electrical systems and components- Comprehend customer specifications, railroad regulations, and government regulations to determine proper design parameters for custom product design- Capable of travelling to remote locations as needed to gather data and feedback on equipment performance- Producing an error free engineering design package using sound engineering practices- Communicate ideas to colleagues and clients through proficient verbal and writing skills. - Active learning as an electrical engineer to acquire new information and incorporate it into daily work- Analysis of others' work product, as well as that of electrical products, components, and applications, to make improvements as required- Other duties as assignedWorking hours: 7:30 AM - 4:30 PMSkills:- Electrical engineering and PCB design- Superior listening skills to understand clients' needs and receive feedback from them and coworkers- Problem-solving to be able to identify problems and come up with viable solutions. - Use of critical thinking skills to evaluating the options and select the best oneEducation:BachelorsExperience:4-7 yearsQualifications:- 3+ years of experience preferred, experience with specialist vehicle design and manufacture preferred;- Competent using a standard multimeter and PCs on engine controls and vehicle electrical systems for testing and troubleshooting;- Able to read, interpret, and generate or modify electrical schematics and designs;- 3D and 2D design software experience is required;- Must be a self-starter who can work independently or on teams to get the work product completed on-time and on-budget. Apply today and find a career that YOU will love!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The Electrical Engineer will work independently on highly engineered, heavy equipment products in order to meet customer specifications and requirements. The individual in this position is expected to evaluate, select, and apply standard engineering techniques, procedures, and criteria using sound judgment in design and modification of mobile construction equipment. On-site engineering capabilities include structural, mechanical, electrical, fluids, and powertrain design work.Responsibilities:- Performing the design, analysis, testing and documentation of mobile equipment electrical systems and components- Comprehend customer specifications, railroad regulations, and government regulations to determine proper design parameters for custom product design- Capable of travelling to remote locations as needed to gather data and feedback on equipment performance- Producing an error free engineering design package using sound engineering practices- Communicate ideas to colleagues and clients through proficient verbal and writing skills. - Active learning as an electrical engineer to acquire new information and incorporate it into daily work- Analysis of others' work product, as well as that of electrical products, components, and applications, to make improvements as required- Other duties as assignedWorking hours: 7:30 AM - 4:30 PMSkills:- Electrical engineering and PCB design- Superior listening skills to understand clients' needs and receive feedback from them and coworkers- Problem-solving to be able to identify problems and come up with viable solutions. - Use of critical thinking skills to evaluating the options and select the best oneEducation:BachelorsExperience:4-7 yearsQualifications:- 3+ years of experience preferred, experience with specialist vehicle design and manufacture preferred;- Competent using a standard multimeter and PCs on engine controls and vehicle electrical systems for testing and troubleshooting;- Able to read, interpret, and generate or modify electrical schematics and designs;- 3D and 2D design software experience is required;- Must be a self-starter who can work independently or on teams to get the work product completed on-time and on-budget. Apply today and find a career that YOU will love!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Frederick, Maryland
      • Temp to Perm
      • $17.00 - $21.00 per hour
      • 8:00 AM - 5:00 PM
      Entry Level and will train. GENERAL POSITION DESCRIPTION The Validation Associate I will be responsible for performing calibrations, validations and the monitoring of Controlled Temperature Units (CTUS) and other equipment. It is critical for this role to comply will all GXP policies and procedures. JOB RESPONSIBILITIES Support receiving and qualification of new equipment, calibrations, instruments, including computer systems Execute installation, operational and performance qualification protocols for temperature units Use Kaye Validators and/or data loggers for temperature mapping of controlled storage units Assist with writing, revising, approving standard operating procedures Identify and implement process improvements through change control, ions of non-conforming equipment, processes, etc., and documentation (logbooks, protocols, etc.) Assist in the development of a process validation program Calibrate sensors and temperature-controlled unit displays, amongst other pieces of equipment Perform Alarm Testing of various monitoring system sensors Work effectively with cross-functional departments as necessary to resolve issues Perform other duties as requested SKILLS / KNOWLEDGE ABILITIES Ability to handle and work with light hand tools Must be able to lift 50 lbs. and work on equipment, which can require bending, kneeling, sitting or standing for long periods of time Ability to maintain a high degree of accuracy and attention to detail Ability to handle a fast-paced, multi-tasking environment and prioritize effectively Good writing skills Experience in computer skills, including Microsoft Excel Ability to work independently and in a group on a variety of projects, in an active office or warehouse setting EDUCATION & EXPERIENCE High School diploma or equivalentResponsibilities:.Working hours: 8:00 AM - 5:00 PMSkills:.Education:High SchoolExperience:1-4 yearsQualifications:. 301-694-7700Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Entry Level and will train. GENERAL POSITION DESCRIPTION The Validation Associate I will be responsible for performing calibrations, validations and the monitoring of Controlled Temperature Units (CTUS) and other equipment. It is critical for this role to comply will all GXP policies and procedures. JOB RESPONSIBILITIES Support receiving and qualification of new equipment, calibrations, instruments, including computer systems Execute installation, operational and performance qualification protocols for temperature units Use Kaye Validators and/or data loggers for temperature mapping of controlled storage units Assist with writing, revising, approving standard operating procedures Identify and implement process improvements through change control, ions of non-conforming equipment, processes, etc., and documentation (logbooks, protocols, etc.) Assist in the development of a process validation program Calibrate sensors and temperature-controlled unit displays, amongst other pieces of equipment Perform Alarm Testing of various monitoring system sensors Work effectively with cross-functional departments as necessary to resolve issues Perform other duties as requested SKILLS / KNOWLEDGE ABILITIES Ability to handle and work with light hand tools Must be able to lift 50 lbs. and work on equipment, which can require bending, kneeling, sitting or standing for long periods of time Ability to maintain a high degree of accuracy and attention to detail Ability to handle a fast-paced, multi-tasking environment and prioritize effectively Good writing skills Experience in computer skills, including Microsoft Excel Ability to work independently and in a group on a variety of projects, in an active office or warehouse setting EDUCATION & EXPERIENCE High School diploma or equivalentResponsibilities:.Working hours: 8:00 AM - 5:00 PMSkills:.Education:High SchoolExperience:1-4 yearsQualifications:. 301-694-7700Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Frederick, Maryland
      • Temp to Perm
      • $14.00 - $16.00 per hour
      • 7:00 AM - 3:30 PM
      Temp to Perm - Package, mark and label all items according to procedures and customer requirements. Complete shipping transactions via ERP system (Manfact) and maintain documentation. Create shipping labels using UPS and Fedex software. Learn and demonstrate proper ESD board handling techniques and packaging requirements. Keep work area stocked and in orderMaintain all shipping supplies and work with buyers to order any replacement supplies. Were looking for little to no experience (0-3 years). Must be thorough & methodical Comfortable with physical job (on their feet a lot)High level of attention to detail. Comfortable with repetitive tasks with strong computer skills. Sell up the benefit for the lower pay with 5 weeks PTO and Health Insurance.Responsibilities:Packing and shipping for eletronics corporation.Working hours: 7:00 AM - 3:30 PMSkills:.Education:No Degree RequiredExperience:0-1 yearsQualifications:. ApplySpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Temp to Perm - Package, mark and label all items according to procedures and customer requirements. Complete shipping transactions via ERP system (Manfact) and maintain documentation. Create shipping labels using UPS and Fedex software. Learn and demonstrate proper ESD board handling techniques and packaging requirements. Keep work area stocked and in orderMaintain all shipping supplies and work with buyers to order any replacement supplies. Were looking for little to no experience (0-3 years). Must be thorough & methodical Comfortable with physical job (on their feet a lot)High level of attention to detail. Comfortable with repetitive tasks with strong computer skills. Sell up the benefit for the lower pay with 5 weeks PTO and Health Insurance.Responsibilities:Packing and shipping for eletronics corporation.Working hours: 7:00 AM - 3:30 PMSkills:.Education:No Degree RequiredExperience:0-1 yearsQualifications:. ApplySpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Frederick, Maryland
      • Temp to Perm
      • $17.00 - $25.00 per hour
      • 3:00 PM - 11:30 PM
      Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Mathematical Skills: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form.Responsibilities:Essential Duties and Responsibilities:Must be able to read a tape measure to 1/8th inch.Must be able to follow verbal, written, and pictorial instructions.Must be able to interpret electrical schematics.Must be able to use hand tools.Mounts and assembles electrical components such as transformers, contactors, relays, controllers, etc. displaying knowledge of good practices in workmanship and wire routing.Assembles and attaches hardware, such as caps, clamps, knobs, and switches.Other duties as assigned.Working hours: 3:00 PM - 11:30 PMSkills:.Education:High SchoolExperience:1-4 yearsQualifications:. 301-694-7700Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Mathematical Skills: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form.Responsibilities:Essential Duties and Responsibilities:Must be able to read a tape measure to 1/8th inch.Must be able to follow verbal, written, and pictorial instructions.Must be able to interpret electrical schematics.Must be able to use hand tools.Mounts and assembles electrical components such as transformers, contactors, relays, controllers, etc. displaying knowledge of good practices in workmanship and wire routing.Assembles and attaches hardware, such as caps, clamps, knobs, and switches.Other duties as assigned.Working hours: 3:00 PM - 11:30 PMSkills:.Education:High SchoolExperience:1-4 yearsQualifications:. 301-694-7700Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Fresno, California
      • Permanent
      • $140,000 - $170,000 per year
      • 8:00 AM - 5:00 PM
      A leader in the Engineering Department, this role will direct, supervise and be accountable for capital programs, projects, strategic initiatives, and vendor relationships, etc., This role will also oversee the Engineering & Maintenance staff to provide the highest executional effectiveness to support the operations of the organization.Responsibilities:???Identifying/solving issues and managing scope, budget and quality in a proactive, timely manner???Engineering support activities to facilitate completion of specific projects.???Schedule, budget, coordinate project objectives within budgetary limits and reporting status???Process engineering and equipment layout, integration, and specification services for projects that include a comparative analysis and executive summary for senior management???Vendor equipment investigation, selection, price negotiation, coordination, and procurement efforts related to projects???Participate in monthly and/or weekly project reviews for technical and design concerns with Senior Management???Preparation and review of scope documents, job specifications, proficiency evaluation, price negotiations and contract terms???Analyze and plan for installation of equipment and related construction activities???Management of on-site contractors???Inspects work progress, equipment and construction sites.???Project start-up and commissioning equipment???Management of Process & Package Specifications & SourcingWorking hours: 8:00 AM - 5:00 PMSkills:Extensive experience with high and/or low acid processing engineering and application.Competency in Auto-CAD.Working knowledge of PLC, RS Logix and Wonderware.Education:BachelorsExperience:7-10 yearsQualifications:BS Degree in Engineering or related course study.Minimum 7 years of experience (10 + years preferred) in an Engineering management role in a Food Manufacturing or related environment. Send resume to rogerstiles@spherion.comSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.San Francisco Fair Chance Ordinance:Qualified applicants in San Francisco with criminal histories will be considered for employment in accordance with the San Francisco Fair Chance Ordinance.
      A leader in the Engineering Department, this role will direct, supervise and be accountable for capital programs, projects, strategic initiatives, and vendor relationships, etc., This role will also oversee the Engineering & Maintenance staff to provide the highest executional effectiveness to support the operations of the organization.Responsibilities:???Identifying/solving issues and managing scope, budget and quality in a proactive, timely manner???Engineering support activities to facilitate completion of specific projects.???Schedule, budget, coordinate project objectives within budgetary limits and reporting status???Process engineering and equipment layout, integration, and specification services for projects that include a comparative analysis and executive summary for senior management???Vendor equipment investigation, selection, price negotiation, coordination, and procurement efforts related to projects???Participate in monthly and/or weekly project reviews for technical and design concerns with Senior Management???Preparation and review of scope documents, job specifications, proficiency evaluation, price negotiations and contract terms???Analyze and plan for installation of equipment and related construction activities???Management of on-site contractors???Inspects work progress, equipment and construction sites.???Project start-up and commissioning equipment???Management of Process & Package Specifications & SourcingWorking hours: 8:00 AM - 5:00 PMSkills:Extensive experience with high and/or low acid processing engineering and application.Competency in Auto-CAD.Working knowledge of PLC, RS Logix and Wonderware.Education:BachelorsExperience:7-10 yearsQualifications:BS Degree in Engineering or related course study.Minimum 7 years of experience (10 + years preferred) in an Engineering management role in a Food Manufacturing or related environment. Send resume to rogerstiles@spherion.comSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.San Francisco Fair Chance Ordinance:Qualified applicants in San Francisco with criminal histories will be considered for employment in accordance with the San Francisco Fair Chance Ordinance.
      • Luling, Louisiana
      • Temp to Perm
      • $50.00 - $80.00 per hour
      • 8:00 AM - 5:00 PM
      Our client is looking for a Senior Mechanical Project Engineer to support their diverse range of manufacturing projects. The senior mechanical engineer will be supporting efforts throughout the site to maintain and improve the processes that go on every day. As an engineer in the crop protection team, the position is a key member in the plant that works every day to improve sustainable agriculture. This role is responsible for performing all aspects for a complete design of complex mechanical engineering assignments. Work at this level requires extensive progressive experience in mechanical engineering and involves applying advanced engineering techniques and analysis.Responsibilities:- Mastery of the Gated System and their respective documentation requirements; FEL 1 (Project Acceptance), FEL 2 (Project Charter) and FEL 3 (Project Scope)- Development of preliminary project description, schedule and cost estimates upon project assignment- Accomplishing engineering activities such as stress analysis, construction specifications, equipment and material procurement specifications, calculations and piping estimates.- Developing conceptional layouts / cost studies as necessary to determine the simplest, most efficient approach to solving the engineering task at hand; including not to proceed with the work if not feasible / cost attractive.- Producing estimate level preliminary designs / material take-offs for the level of estimate being performed on a project- Development of formal project scopes and capital request documentation- Producing detailed design calculations and sketches for material of constructions associated with the project.- Reviewing and checking vendor / other discipline drawings for mechanical input- Checking calculations and equipment specifications by others to ensure accuracy, conformance to codes, industry standards, design criteria, site/ global standards and conformance to good engineering practice- In-depth knowledge of design standards and codes as applicable to rotating and static piping systems and equipment- Knowledge of good design practices for piping systems, sizing of compressible fluid piping, flexibility and stress analysis of piping systems, application and knowledge of piping supports- Identification of need for safety devices (PSVs, PSE, CVs) and phase separation equipment (steam traps, liquid strainers)- Recognize and communicate scope and design changes promptly- Consulting with design leaders from other disciplines to ensure smooth flow of vital information necessary for the scheduled completion of the project- Knowledge and understanding of schedule constraints and information requirements to produce all mechanical deliverables- Project Quality Assurance and Quality control direction and support- Project closureWorking hours: 8:00 AM - 5:00 PMSkills:- Strong Microstation (or similar) CAD and Excel spreadsheet skills required.- Ability to organize and maintain data file and folder structures- Ability to manage assigned tasks to meet timelines- Very detail oriented- Good Communication skillsEducation:BachelorsExperience:7-10 yearsQualifications:- B.S. or M.S. in Mechanical Engineering from an accredited university is required- Professional Engineering (PE) registration is a plus- 10+ years of relevant industrial experience in mechanical engineering- Strong project management and multitasking skills- Demonstrated creativity, innovation and ingenuity- Self-motivated, results driven- Perpetual drive towards learning, developing, growing and improving- Solid verbal and written communication and computer skills, Microsoft Suite- Proven leadership abilities and ability to influence in a non-traditional business environment- Unwavering ethics- Strong commitment to safety
      Our client is looking for a Senior Mechanical Project Engineer to support their diverse range of manufacturing projects. The senior mechanical engineer will be supporting efforts throughout the site to maintain and improve the processes that go on every day. As an engineer in the crop protection team, the position is a key member in the plant that works every day to improve sustainable agriculture. This role is responsible for performing all aspects for a complete design of complex mechanical engineering assignments. Work at this level requires extensive progressive experience in mechanical engineering and involves applying advanced engineering techniques and analysis.Responsibilities:- Mastery of the Gated System and their respective documentation requirements; FEL 1 (Project Acceptance), FEL 2 (Project Charter) and FEL 3 (Project Scope)- Development of preliminary project description, schedule and cost estimates upon project assignment- Accomplishing engineering activities such as stress analysis, construction specifications, equipment and material procurement specifications, calculations and piping estimates.- Developing conceptional layouts / cost studies as necessary to determine the simplest, most efficient approach to solving the engineering task at hand; including not to proceed with the work if not feasible / cost attractive.- Producing estimate level preliminary designs / material take-offs for the level of estimate being performed on a project- Development of formal project scopes and capital request documentation- Producing detailed design calculations and sketches for material of constructions associated with the project.- Reviewing and checking vendor / other discipline drawings for mechanical input- Checking calculations and equipment specifications by others to ensure accuracy, conformance to codes, industry standards, design criteria, site/ global standards and conformance to good engineering practice- In-depth knowledge of design standards and codes as applicable to rotating and static piping systems and equipment- Knowledge of good design practices for piping systems, sizing of compressible fluid piping, flexibility and stress analysis of piping systems, application and knowledge of piping supports- Identification of need for safety devices (PSVs, PSE, CVs) and phase separation equipment (steam traps, liquid strainers)- Recognize and communicate scope and design changes promptly- Consulting with design leaders from other disciplines to ensure smooth flow of vital information necessary for the scheduled completion of the project- Knowledge and understanding of schedule constraints and information requirements to produce all mechanical deliverables- Project Quality Assurance and Quality control direction and support- Project closureWorking hours: 8:00 AM - 5:00 PMSkills:- Strong Microstation (or similar) CAD and Excel spreadsheet skills required.- Ability to organize and maintain data file and folder structures- Ability to manage assigned tasks to meet timelines- Very detail oriented- Good Communication skillsEducation:BachelorsExperience:7-10 yearsQualifications:- B.S. or M.S. in Mechanical Engineering from an accredited university is required- Professional Engineering (PE) registration is a plus- 10+ years of relevant industrial experience in mechanical engineering- Strong project management and multitasking skills- Demonstrated creativity, innovation and ingenuity- Self-motivated, results driven- Perpetual drive towards learning, developing, growing and improving- Solid verbal and written communication and computer skills, Microsoft Suite- Proven leadership abilities and ability to influence in a non-traditional business environment- Unwavering ethics- Strong commitment to safety
      • Montgomery, Alabama
      • Permanent
      • $75,000 - $95,000 per year
      • 7:30 AM - 4:30 PM
      The Mechanical Engineer will work independently on highly engineered, heavy equipment products in order to meet customer specifications and requirements. The individual in this position is expected to evaluate, select, and apply standard engineering techniques, procedures, and criteria using sound judgment in design and modification of mobile construction equipment. On-site engineering capabilities include structural, mechanical, electrical, fluids, and powertrain design work.Responsibilities:- Project management duties including directing the work of junior engineers and designers while also performing design engineering duties- Work to also include performing the design, analysis, and testing of mobile equipment structures, systems, and components- Performing FEA analysis on mobile equipment frames and assemblies- Reviewing customer specifications, railroad regulations, and government regulations to determine proper design parameters for custom designed product- Producing an error free engineering design package using sound engineering practices- Clearly communicating with engineering personnel, suppliers, plant personnel, and others to implement cost reductions, product improvements, process improvements, and to support product build processes- Evaluate and implement engineering changes for improvements and cost reductions- Provide technical direction to manufacturing, procurement, assembly, aftermarket parts and service personnel- Other duties as assigned.Working hours: 7:30 AM - 4:30 PMSkills:- Must have the ability to communicate technical information effectively with team members and others both inside and outside the immediate work group- Proficient within a Lean Transformation/ Continuous Improvement Culture- Able to contribute as a team member in an environment based on KPI's and execution of SMART goals- Experience working in a continuous improvement culture of Lean manufacturing and 5S- Knowledge of Quality Management Systems, ISO 9001Education:BachelorsExperience:4-7 yearsQualifications:- Bachelor's degree in Mechanical Engineering or equivalent.- 7+ years of experience required, experience with specialist vehicle design and manufacture preferred- Project Planning, Project Management, and supervisory experience is required- New Product Development experience is required- 3D design software experience is required, Autodesk Inventor is preferred- Experience with FEA is required- Thorough understanding of manufacturing and fabrication processes are required Apply today and find a job YOU will love!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      The Mechanical Engineer will work independently on highly engineered, heavy equipment products in order to meet customer specifications and requirements. The individual in this position is expected to evaluate, select, and apply standard engineering techniques, procedures, and criteria using sound judgment in design and modification of mobile construction equipment. On-site engineering capabilities include structural, mechanical, electrical, fluids, and powertrain design work.Responsibilities:- Project management duties including directing the work of junior engineers and designers while also performing design engineering duties- Work to also include performing the design, analysis, and testing of mobile equipment structures, systems, and components- Performing FEA analysis on mobile equipment frames and assemblies- Reviewing customer specifications, railroad regulations, and government regulations to determine proper design parameters for custom designed product- Producing an error free engineering design package using sound engineering practices- Clearly communicating with engineering personnel, suppliers, plant personnel, and others to implement cost reductions, product improvements, process improvements, and to support product build processes- Evaluate and implement engineering changes for improvements and cost reductions- Provide technical direction to manufacturing, procurement, assembly, aftermarket parts and service personnel- Other duties as assigned.Working hours: 7:30 AM - 4:30 PMSkills:- Must have the ability to communicate technical information effectively with team members and others both inside and outside the immediate work group- Proficient within a Lean Transformation/ Continuous Improvement Culture- Able to contribute as a team member in an environment based on KPI's and execution of SMART goals- Experience working in a continuous improvement culture of Lean manufacturing and 5S- Knowledge of Quality Management Systems, ISO 9001Education:BachelorsExperience:4-7 yearsQualifications:- Bachelor's degree in Mechanical Engineering or equivalent.- 7+ years of experience required, experience with specialist vehicle design and manufacture preferred- Project Planning, Project Management, and supervisory experience is required- New Product Development experience is required- 3D design software experience is required, Autodesk Inventor is preferred- Experience with FEA is required- Thorough understanding of manufacturing and fabrication processes are required Apply today and find a job YOU will love!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • New Bedford, Massachusetts
      • Permanent
      • $80,000 - $85,000 per year
      • 8:00 AM - 5:00 PM
      Spherion is hiring for an experienced Process Engineer interested in working at Precix located in New Bedford, MA.This position is responsible for supporting, improving and advancing the rubbermanufacturing process and/or methods and new product development and their launches.Responsibilities:-Develop, evaluate and improve manufacturing process methods using ???hands on??? involvement, if necessary.-Utilize company data acquisition sources to evaluate processes and suggest/implement improvements.-Plan and develop experimental test programs.-Confer with engineering and other appropriate personnel to prepare design modification.-Confer with management and other staff regarding manufacturing capabilities, production schedules and other considerations to facilitate production process improvements.-Evaluate and approve design changes, specifications and drawing releases.-Coordinate activities concerned with technical developments including scheduling, resolving, engineering design and test issues.-Confer with appropriate personnel to help ensure efficient production methods are implemented on new products (pre-production launches).-Research and analyze data such as: customer design proposals and specifications to determine feasibility and costs.-Provide customer with requested/required information for design and approvals.-Evaluate and approve design changes, specifications and drawing release.-Confer with vendors to determine product specifications and arrange for purchase of equipment and materials.-Evaluate, test and implement alternate product according to specifications and quality standards.-Direct and coordinate fabrication and installation activities to ensure products and systems conform to engineering design and customer specifications.-Maintain safety protocols and environmental impacts are reviewed to meet any applicable standards.-Coordinate operation, maintenance and repair activities to obtain optimum utilization of machines and equipment. -Design projects must be managed to specific phases or aspects such as: input, output, verification, and validation.-Prepare and present interim and complete project reports to senior management and others as necessary.-Perform other duties as required or requested.SUPERVISORY RESPONSIBILITES:-Must be capable of managing a work force that includes but is not limited to scheduling workflow, tracking attendance and managing conflict.Working hours: 8:00 AM - 5:00 PMSkills:-Exposure and understanding of Automotive, Aerospace and Industrial Quality Standards.-Six Sigma, continuous improvement, or other problem-solving methodology is necessary for true solution implementation. Experience with lean manufacturing methods is beneficial.-Project management skills, strong organizational skills and analytical skills.-Knowledge of urethane products, a plus.-Proficient with MS Word, Excel, and PowerPoint.-SAP and CAD experience is a plus.-Must be able to work closely with Quality, Operations, Maintenance, Machine Shop, IT, Sales/Marketing, Finance etc. and be able to communicate effectively to coordinate projects/tasks.-Urethane processing experience is a plus.Education:BachelorsExperience:1-4 yearsQualifications:-Bachelor of Science degree in engineering or equivalent in quantifiable rubber/plastic related processing experience. PHYSICAL DEMANDS AND WORK ENVIRONMENT:-Work environment consists of office and manufacturing environments which may have exposure to noise, heat, and rubber smells.-Noise levels are quiet to moderate up to 2/3 of the time.-Noise levels are loud 1/3 of the time.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion is hiring for an experienced Process Engineer interested in working at Precix located in New Bedford, MA.This position is responsible for supporting, improving and advancing the rubbermanufacturing process and/or methods and new product development and their launches.Responsibilities:-Develop, evaluate and improve manufacturing process methods using ???hands on??? involvement, if necessary.-Utilize company data acquisition sources to evaluate processes and suggest/implement improvements.-Plan and develop experimental test programs.-Confer with engineering and other appropriate personnel to prepare design modification.-Confer with management and other staff regarding manufacturing capabilities, production schedules and other considerations to facilitate production process improvements.-Evaluate and approve design changes, specifications and drawing releases.-Coordinate activities concerned with technical developments including scheduling, resolving, engineering design and test issues.-Confer with appropriate personnel to help ensure efficient production methods are implemented on new products (pre-production launches).-Research and analyze data such as: customer design proposals and specifications to determine feasibility and costs.-Provide customer with requested/required information for design and approvals.-Evaluate and approve design changes, specifications and drawing release.-Confer with vendors to determine product specifications and arrange for purchase of equipment and materials.-Evaluate, test and implement alternate product according to specifications and quality standards.-Direct and coordinate fabrication and installation activities to ensure products and systems conform to engineering design and customer specifications.-Maintain safety protocols and environmental impacts are reviewed to meet any applicable standards.-Coordinate operation, maintenance and repair activities to obtain optimum utilization of machines and equipment. -Design projects must be managed to specific phases or aspects such as: input, output, verification, and validation.-Prepare and present interim and complete project reports to senior management and others as necessary.-Perform other duties as required or requested.SUPERVISORY RESPONSIBILITES:-Must be capable of managing a work force that includes but is not limited to scheduling workflow, tracking attendance and managing conflict.Working hours: 8:00 AM - 5:00 PMSkills:-Exposure and understanding of Automotive, Aerospace and Industrial Quality Standards.-Six Sigma, continuous improvement, or other problem-solving methodology is necessary for true solution implementation. Experience with lean manufacturing methods is beneficial.-Project management skills, strong organizational skills and analytical skills.-Knowledge of urethane products, a plus.-Proficient with MS Word, Excel, and PowerPoint.-SAP and CAD experience is a plus.-Must be able to work closely with Quality, Operations, Maintenance, Machine Shop, IT, Sales/Marketing, Finance etc. and be able to communicate effectively to coordinate projects/tasks.-Urethane processing experience is a plus.Education:BachelorsExperience:1-4 yearsQualifications:-Bachelor of Science degree in engineering or equivalent in quantifiable rubber/plastic related processing experience. PHYSICAL DEMANDS AND WORK ENVIRONMENT:-Work environment consists of office and manufacturing environments which may have exposure to noise, heat, and rubber smells.-Noise levels are quiet to moderate up to 2/3 of the time.-Noise levels are loud 1/3 of the time.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Luling, Louisiana
      • Temp to Perm
      • $40.00 - $47.00 per hour
      • 8:00 AM - 5:00 PM
      We have an opening for a Mechanical Project Engineer available in Luling, LA. Our client is a premier life science company focused on healthcare and agriculture. Compensation for this contract is negotiable for qualified candidates. The Intermediate Mechanical Project Engineer will support our diverse range of manufacturing projects. The incumbent will be supporting efforts throughout the site to maintain and improve the processes that go on every day. As an engineer in the crop protection team, the position is a key member in the plant that works every day to improve sustainable agriculture. This role is responsible for performing all aspects for a complete design of complex mechanical engineering assignments. Work at this level requires extensive progressive experience in mechanical engineering and involves applying advanced engineering techniques and analysis. This work will be performed under the supervision of the mechanical lead. The Intermediate Mechanical Project Engineer with serve as the project manager for their assigned projects for which they will also perform the mechanical engineering services for. This requires the incorporation of other disciplines to successfully complete the assigned projects on time and on budget.Apply today or if you would prefer to submit your resume via email or have any questions regarding the role feel free to reach out to us directly: 504-455-6565 / spherionneworleans@spherion.com.Responsibilities:??? Familiarity with and utilizing department design and drafting standards??? Mastery of the client Gated System and their respective documentation requirements; FEL 1 (Project Acceptance), FEL 2 (Project Charter) and FEL 3 (Project Scope)??? Development of preliminary project description, schedule, and cost estimates upon project assignment??? Accomplishing engineering activities such as stress analysis, construction specifications, equipment and material procurement specifications, calculations, and piping estimates.??? Developing conceptional layouts / cost studies as necessary to determine the simplest, most efficient approach to solving the engineering task at hand; including not to proceed with the work if not feasible / cost attractive.??? Producing estimate level preliminary designs / material take-offs for the level of estimate being performed on a project??? Producing detailed design calculations and sketches for material of constructions associated with the project.??? Reviewing and checking vendor / other discipline drawings for mechanical input??? Checking calculations and equipment specifications by others to ensure accuracy, conformance to codes, industry standards, design criteria, site/ global client standards and conformance to good engineering practice??? In-depth knowledge of design standards and codes as applicable to rotating and static piping systems and equipment??? Knowledge of good design practices for piping systems, sizing of compressible fluid piping, flexibility and stress analysis of piping systems, application, and knowledge of piping supports??? Identification of need for safety devices (PSVs, PSE, CVs) and phase separation equipment (steam traps, liquid strainers)??? Produce designs with efficient use of construction material with emphasis on ease of construction and meeting the project goals??? Estimate and schedule professional service hours and assess the progress / quality of the mechanical work??? Assist other engineers in developing and assembling scopes, drawings / specifications into packages, enabling mechanical purchase inquiries to be issued for procurement and materials or for subcontract pricing. This may include packaged equipment while soliciting input from other disciplines to provide requirements for associated structural, instrument and electrical aspects of the scope.??? Perform fieldwork necessary to gather field date, check tie-ins and provide construction supportWorking hours: 8:00 AM - 5:00 PMSkills:- Excellent presentation skills- Strong virtual team skills- Strong project management and multitasking skills- Demonstrated creativity, innovation, and ingenuity- Self-motivated, results driven- Perpetual drive towards learning, developing, growing, and improvingEducation:BachelorsExperience:7-10 yearsQualifications:??? B.S. or M.S. in Mechanical Engineering from an accredited university??? Professional Engineering (PE) registration is a plus??? 5+ years of relevant industrial experience in mechanical engineering??? Solid verbal and written communication and computer skills, Microsoft Suite??? Proven leadership abilities and ability to influence in a non-traditional business environment??? Unwavering ethics??? Strong commitment to safety??? Ability to work alone and as a true team player Thank you for your interest in working with Spherion; we appreciate you considering us as a partner in your career progression! If you would prefer to submit your resume via email, or have any questions regarding the role feel free to reach out to us directly: 504-455-6565 (call or text) / spherionneworleans@spherion.com.Spherion will always protect your privacy: all discussions and communications are strictly confidential.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We have an opening for a Mechanical Project Engineer available in Luling, LA. Our client is a premier life science company focused on healthcare and agriculture. Compensation for this contract is negotiable for qualified candidates. The Intermediate Mechanical Project Engineer will support our diverse range of manufacturing projects. The incumbent will be supporting efforts throughout the site to maintain and improve the processes that go on every day. As an engineer in the crop protection team, the position is a key member in the plant that works every day to improve sustainable agriculture. This role is responsible for performing all aspects for a complete design of complex mechanical engineering assignments. Work at this level requires extensive progressive experience in mechanical engineering and involves applying advanced engineering techniques and analysis. This work will be performed under the supervision of the mechanical lead. The Intermediate Mechanical Project Engineer with serve as the project manager for their assigned projects for which they will also perform the mechanical engineering services for. This requires the incorporation of other disciplines to successfully complete the assigned projects on time and on budget.Apply today or if you would prefer to submit your resume via email or have any questions regarding the role feel free to reach out to us directly: 504-455-6565 / spherionneworleans@spherion.com.Responsibilities:??? Familiarity with and utilizing department design and drafting standards??? Mastery of the client Gated System and their respective documentation requirements; FEL 1 (Project Acceptance), FEL 2 (Project Charter) and FEL 3 (Project Scope)??? Development of preliminary project description, schedule, and cost estimates upon project assignment??? Accomplishing engineering activities such as stress analysis, construction specifications, equipment and material procurement specifications, calculations, and piping estimates.??? Developing conceptional layouts / cost studies as necessary to determine the simplest, most efficient approach to solving the engineering task at hand; including not to proceed with the work if not feasible / cost attractive.??? Producing estimate level preliminary designs / material take-offs for the level of estimate being performed on a project??? Producing detailed design calculations and sketches for material of constructions associated with the project.??? Reviewing and checking vendor / other discipline drawings for mechanical input??? Checking calculations and equipment specifications by others to ensure accuracy, conformance to codes, industry standards, design criteria, site/ global client standards and conformance to good engineering practice??? In-depth knowledge of design standards and codes as applicable to rotating and static piping systems and equipment??? Knowledge of good design practices for piping systems, sizing of compressible fluid piping, flexibility and stress analysis of piping systems, application, and knowledge of piping supports??? Identification of need for safety devices (PSVs, PSE, CVs) and phase separation equipment (steam traps, liquid strainers)??? Produce designs with efficient use of construction material with emphasis on ease of construction and meeting the project goals??? Estimate and schedule professional service hours and assess the progress / quality of the mechanical work??? Assist other engineers in developing and assembling scopes, drawings / specifications into packages, enabling mechanical purchase inquiries to be issued for procurement and materials or for subcontract pricing. This may include packaged equipment while soliciting input from other disciplines to provide requirements for associated structural, instrument and electrical aspects of the scope.??? Perform fieldwork necessary to gather field date, check tie-ins and provide construction supportWorking hours: 8:00 AM - 5:00 PMSkills:- Excellent presentation skills- Strong virtual team skills- Strong project management and multitasking skills- Demonstrated creativity, innovation, and ingenuity- Self-motivated, results driven- Perpetual drive towards learning, developing, growing, and improvingEducation:BachelorsExperience:7-10 yearsQualifications:??? B.S. or M.S. in Mechanical Engineering from an accredited university??? Professional Engineering (PE) registration is a plus??? 5+ years of relevant industrial experience in mechanical engineering??? Solid verbal and written communication and computer skills, Microsoft Suite??? Proven leadership abilities and ability to influence in a non-traditional business environment??? Unwavering ethics??? Strong commitment to safety??? Ability to work alone and as a true team player Thank you for your interest in working with Spherion; we appreciate you considering us as a partner in your career progression! If you would prefer to submit your resume via email, or have any questions regarding the role feel free to reach out to us directly: 504-455-6565 (call or text) / spherionneworleans@spherion.com.Spherion will always protect your privacy: all discussions and communications are strictly confidential.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Luling, Louisiana
      • Temp to Perm
      • $35.00 - $45.00 per hour
      • 8:00 AM - 5:00 PM
      Our client is looking for an experienced Project Engineer with a focus in electrical engineering. The incumbent will report to the Site Project Engineering Manager and is responsible for overseeing and executing projects with an emphasis on electrical and instrumentation engineering activities, including: electrical equipment calculations, electrical equipment specification and design, instrumentation specification and design, work plan writing and preparation, cost estimation, equipment procurement, system startup, data management and reporting, and system troubleshooting (as required).Responsibilities:Project Management:- Manage multiple tasks to ensure projects are completed on time and on budget, with a high degree of internal and external client satisfaction.- Communicate project/task status and issues with project manager, client and/or company management.- Coordination and management of material vendors, subcontractors, and company staff- Maintain and report on a project budget and schedule to meet project expectations- Develop project estimates (budget and schedule) to secure funding- Use engineering discipline and experience to solve project issues during installation- Locate project drawings and provide initial markups to drafting for incorporation- Able to independently define the course of action and seek out the information and resources necessary to complete that courseDesign Engineering:- Oversee and prepare designs and work plans, from conceptual design through detailed design packages. Primary focus is on the electrical engineering aspect; however, expect involvement in other aspects of the design process. Electrical design tasks may include electrical load calculations, short-circuit and overcurrent protection calculations, transformer and wire/cable sizing. Other typical design aspects may include preparation of tray routing, wire routes, etc.- Develop electrical equipment and power distribution equipment specifications; prepare electrical load calculations for single and three phase loads; sketch/mark up electrical single line drawings, schematics and detail drawings as required.- Develop cable schedules, instrument indices, equipment lists, and material takeoffs; prepare requests for bids for subcontractors and material vendors. Prepare construction and equipment specifications, including means and methods. Compare bids and recommend the selection of subcontractors and material vendors.- Perform field visits on new project opportunities to determine the available site power, and utility/facility constraints, collect information regarding construction permits, evaluate potential site support contractors, and assist with preparation of cost estimates.- Lead electrical design aspects of company projects- Work with site DCS team to implement changes to the DCS as it applies to assigned projects- Understanding of and experience working with various voltage levels including: 24VDC, 120VAC, 480VAC, 2400VAC, and 15kV- Understanding of and experience working with instrumentation systems including: 4-20ma, 0-5VDC, and 0-10VDCWorking hours: 8:00 AM - 5:00 PMSkills:Skills/Aptitudes:- Self-starter and outgoing personality traits- Demonstrated leadership skills- Ability to take direction and act independently- Strong communications and organization skills- Ability to manage multiple priorities and stay organized while doing soLevel of Supervision:- Work independently based on general instructions, directions or objectivesEducation:BachelorsExperience:4-7 yearsQualifications:- BS or higher Electrical Engineering degree- Advanced training & experience in electrical power system design & distribution- At least 10 years electrical engineering experience- Prefer at least 5 years experience in c
      Our client is looking for an experienced Project Engineer with a focus in electrical engineering. The incumbent will report to the Site Project Engineering Manager and is responsible for overseeing and executing projects with an emphasis on electrical and instrumentation engineering activities, including: electrical equipment calculations, electrical equipment specification and design, instrumentation specification and design, work plan writing and preparation, cost estimation, equipment procurement, system startup, data management and reporting, and system troubleshooting (as required).Responsibilities:Project Management:- Manage multiple tasks to ensure projects are completed on time and on budget, with a high degree of internal and external client satisfaction.- Communicate project/task status and issues with project manager, client and/or company management.- Coordination and management of material vendors, subcontractors, and company staff- Maintain and report on a project budget and schedule to meet project expectations- Develop project estimates (budget and schedule) to secure funding- Use engineering discipline and experience to solve project issues during installation- Locate project drawings and provide initial markups to drafting for incorporation- Able to independently define the course of action and seek out the information and resources necessary to complete that courseDesign Engineering:- Oversee and prepare designs and work plans, from conceptual design through detailed design packages. Primary focus is on the electrical engineering aspect; however, expect involvement in other aspects of the design process. Electrical design tasks may include electrical load calculations, short-circuit and overcurrent protection calculations, transformer and wire/cable sizing. Other typical design aspects may include preparation of tray routing, wire routes, etc.- Develop electrical equipment and power distribution equipment specifications; prepare electrical load calculations for single and three phase loads; sketch/mark up electrical single line drawings, schematics and detail drawings as required.- Develop cable schedules, instrument indices, equipment lists, and material takeoffs; prepare requests for bids for subcontractors and material vendors. Prepare construction and equipment specifications, including means and methods. Compare bids and recommend the selection of subcontractors and material vendors.- Perform field visits on new project opportunities to determine the available site power, and utility/facility constraints, collect information regarding construction permits, evaluate potential site support contractors, and assist with preparation of cost estimates.- Lead electrical design aspects of company projects- Work with site DCS team to implement changes to the DCS as it applies to assigned projects- Understanding of and experience working with various voltage levels including: 24VDC, 120VAC, 480VAC, 2400VAC, and 15kV- Understanding of and experience working with instrumentation systems including: 4-20ma, 0-5VDC, and 0-10VDCWorking hours: 8:00 AM - 5:00 PMSkills:Skills/Aptitudes:- Self-starter and outgoing personality traits- Demonstrated leadership skills- Ability to take direction and act independently- Strong communications and organization skills- Ability to manage multiple priorities and stay organized while doing soLevel of Supervision:- Work independently based on general instructions, directions or objectivesEducation:BachelorsExperience:4-7 yearsQualifications:- BS or higher Electrical Engineering degree- Advanced training & experience in electrical power system design & distribution- At least 10 years electrical engineering experience- Prefer at least 5 years experience in c

    Thank you for subscribing to your personalized job alerts.

    It looks like you want to switch your language. This will reset your filters on your current job search.