You are successfully logged out of your my randstad account

You have successfully deleted your account

    Thank you for subscribing to your personalized job alerts.

    89 Insurance Manufacturing & Production jobs found

    Filter3
    Clear all
    Page 3
      • Northwood, Ohio
      • Temp to Perm
      • $15.00 - $15.35 per hour
      • 40
      We are hiring immediately for Assemblers for a Client in Northwood, Ohio. Earn up to $15.35 an hour PLUS a $2,000 Retention Bonus! Adient is pleased to announce that effective 1/10/2022 temporary employees will be eligible for a $2,000.00 Retention Bonus. After 45 days, $1000.00 will be paid out, and the remaining to be paid out after 90 work days. Responsibilities: Ability to lift up to 50lbs Will be manufacturing car seats for various Jeep models Work is fast-paced You won’t get bored as you will be rotating through various stations every 1-2 hours   Requirements:  No steel-toed shoes required 1st and 2nd shift needed Full-time and part-time available GED required Compensation and Benefits: $15.35 an hour Adient Northwood is pleased to announce that effective 1/10/2022 temporary employees will be eligible for a $2,000.00 Retention Bonus.  After 45 days, $1000.00 will be paid out, and the remaining to be paid out after 90 work days. Dress code is casual, and you may wear jeans, shorts and a t-shirt Climate controlled facility Clean work environment Lunchroom, vending machines, refrigerator, and microwave available for use 30-minute lunch break, two or three 10-15 minute breaks (depending on how long your shift is) Spherion offers ACA compliant health insurance once you start working! For additional details, please ask during your virtual interview with us! Interested candidates need to fill out our online ‘Apply Now’ application and then call the office at (419) 376-7521.
      We are hiring immediately for Assemblers for a Client in Northwood, Ohio. Earn up to $15.35 an hour PLUS a $2,000 Retention Bonus! Adient is pleased to announce that effective 1/10/2022 temporary employees will be eligible for a $2,000.00 Retention Bonus. After 45 days, $1000.00 will be paid out, and the remaining to be paid out after 90 work days. Responsibilities: Ability to lift up to 50lbs Will be manufacturing car seats for various Jeep models Work is fast-paced You won’t get bored as you will be rotating through various stations every 1-2 hours   Requirements:  No steel-toed shoes required 1st and 2nd shift needed Full-time and part-time available GED required Compensation and Benefits: $15.35 an hour Adient Northwood is pleased to announce that effective 1/10/2022 temporary employees will be eligible for a $2,000.00 Retention Bonus.  After 45 days, $1000.00 will be paid out, and the remaining to be paid out after 90 work days. Dress code is casual, and you may wear jeans, shorts and a t-shirt Climate controlled facility Clean work environment Lunchroom, vending machines, refrigerator, and microwave available for use 30-minute lunch break, two or three 10-15 minute breaks (depending on how long your shift is) Spherion offers ACA compliant health insurance once you start working! For additional details, please ask during your virtual interview with us! Interested candidates need to fill out our online ‘Apply Now’ application and then call the office at (419) 376-7521.
      • Sparks, Nevada
      • Permanent
      • $15.75 per hour
      • 8:00 AM - 4:30 PM
      Spherion Staffing Reno, NV is now recruiting for a direct hire opportunity for nationally known rubber hose manufacturing company located in Sparks, NV. $15.75 per hour for first shift openings. M-F, 8am-4pm. Operation of garden hose production line. Cross train in several line positions for breaks and work rotation. Main functions are operating hose winding station, finishing, and packaging. PTO, 401k, health insurance, and 7 paid holidays.Responsibilities:Maintains a safe and clean working environment, observes and follows all safety policies, wears appropriate PPE. Maintains safe and orderly storage area by arranging material, products, and equipment as required. Practice good housekeeping. Maintain a clean, neat, and well organized work areaEnsure product is organized, stacked, and stored appropriatelyEnsure all components are correctAbility to coil hoses manually and through automationWorking hours: 8:00 AM - 4:30 PMSkills:Ability to stand on feet entire shiftAbility to lift up to 25 pounds on a regular basisBackground check and drug test requiredEducation:No Degree RequiredExperience:0-1 yearsQualifications:Ability to stand on feet entire shiftAbility to lift up to 25 pounds on a regular basisBackground check and drug test requiredPrevious warehouse or manufacturing experience a plus but not mandatory Direct hire opportunity. Benefits begin after waiting period. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Spherion Staffing Reno, NV is now recruiting for a direct hire opportunity for nationally known rubber hose manufacturing company located in Sparks, NV. $15.75 per hour for first shift openings. M-F, 8am-4pm. Operation of garden hose production line. Cross train in several line positions for breaks and work rotation. Main functions are operating hose winding station, finishing, and packaging. PTO, 401k, health insurance, and 7 paid holidays.Responsibilities:Maintains a safe and clean working environment, observes and follows all safety policies, wears appropriate PPE. Maintains safe and orderly storage area by arranging material, products, and equipment as required. Practice good housekeeping. Maintain a clean, neat, and well organized work areaEnsure product is organized, stacked, and stored appropriatelyEnsure all components are correctAbility to coil hoses manually and through automationWorking hours: 8:00 AM - 4:30 PMSkills:Ability to stand on feet entire shiftAbility to lift up to 25 pounds on a regular basisBackground check and drug test requiredEducation:No Degree RequiredExperience:0-1 yearsQualifications:Ability to stand on feet entire shiftAbility to lift up to 25 pounds on a regular basisBackground check and drug test requiredPrevious warehouse or manufacturing experience a plus but not mandatory Direct hire opportunity. Benefits begin after waiting period. Apply today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $17.00 - $19.00 per hour
      • 5:00 AM - 2:15 PM
      This position will perform glass blast stainless steel components for final appearance after fabrication or welding and will assist in fabrication and assembly areas.Responsibilities:?? Operate spray booth for phosphatizing or passivating parts and weldments.?? Support blasting nozzle for up to ten hours per day in two-hour interval. ?? Report shortages to be replenished to assembly supervisor when supplies run low.?? Monitor equipment for maintenance and perform preventative maintenance. ?? Perform some preventative maintenance and other duties as assigned. ?? Will assist with lining by using urethane equipment, de-molding, trimming and or grinding to blend seems or custom fit other parts. ?? Will work with two-part urethane in an uncured state, silicone in an uncured state, primer in an uncured state, liquid mold release and xylene on a regular basis. Periodically may be off-site for installation of equipmentWorking hours: 5:00 AM - 2:15 PMSkills:- Spray booth experience.- Mechanical aptitude- De-molding, trimming and or grinding experienceEducation:High SchoolExperience:0-1 yearsQualifications:???High school diploma or equivalent.???Requires passing a pre-employment screening, which includes a drug screen. DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This position will perform glass blast stainless steel components for final appearance after fabrication or welding and will assist in fabrication and assembly areas.Responsibilities:?? Operate spray booth for phosphatizing or passivating parts and weldments.?? Support blasting nozzle for up to ten hours per day in two-hour interval. ?? Report shortages to be replenished to assembly supervisor when supplies run low.?? Monitor equipment for maintenance and perform preventative maintenance. ?? Perform some preventative maintenance and other duties as assigned. ?? Will assist with lining by using urethane equipment, de-molding, trimming and or grinding to blend seems or custom fit other parts. ?? Will work with two-part urethane in an uncured state, silicone in an uncured state, primer in an uncured state, liquid mold release and xylene on a regular basis. Periodically may be off-site for installation of equipmentWorking hours: 5:00 AM - 2:15 PMSkills:- Spray booth experience.- Mechanical aptitude- De-molding, trimming and or grinding experienceEducation:High SchoolExperience:0-1 yearsQualifications:???High school diploma or equivalent.???Requires passing a pre-employment screening, which includes a drug screen. DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Flemington, New Jersey
      • Permanent
      • $16.00 - $16.25 per hour
      • 3:00 PM - 11:00 PM
      Our client is looking for Packaging Machine Operators to work in Flemington, New Jersey. Our client is the country's largest producers and distributors of fruit juices, drinks and yogurt. Job Summary: Responsible for performing any number of activities required to keep the production of food and beverage products running efficiently within the manufacturing plantResponsibilities:Job duties vary but involve operating machines, including but not limited to: forklifts, fillers, down lines, incubators, labelers, palletizers and blow molds.Ensure compliance with applicable quality system standards and the unit's food safety and security programs in support of essential manufacturing strategies and practices.Working hours: 3:00 PM - 11:00 PMSkills:* Ability to maintain a clean and organized work area that promotes safety and efficiency* Ability to work varied shifts, including weekendsEducation:High SchoolExperience:0-1 yearsQualifications:* High School diploma or GED preferred* Experience in similar work environment a plu.* Requires the ability to read, write and perform basic arithmetic computations* Requires dexterity, basic mechanical reasoning, problem solving and the ability to learn* Requires strong verbal and interpersonal skills Compensation up to $20.00/hour, based on skills, experience, qualifications and testingPremium healthcare benefits, including medical, dental and vision coverageRetirement savings accountCompany paid life insurance, vacation, holidays and sick daysFull-time, 40-hour work week plus overtime opportunitiesWhat are you waiting for? Apply Now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Our client is looking for Packaging Machine Operators to work in Flemington, New Jersey. Our client is the country's largest producers and distributors of fruit juices, drinks and yogurt. Job Summary: Responsible for performing any number of activities required to keep the production of food and beverage products running efficiently within the manufacturing plantResponsibilities:Job duties vary but involve operating machines, including but not limited to: forklifts, fillers, down lines, incubators, labelers, palletizers and blow molds.Ensure compliance with applicable quality system standards and the unit's food safety and security programs in support of essential manufacturing strategies and practices.Working hours: 3:00 PM - 11:00 PMSkills:* Ability to maintain a clean and organized work area that promotes safety and efficiency* Ability to work varied shifts, including weekendsEducation:High SchoolExperience:0-1 yearsQualifications:* High School diploma or GED preferred* Experience in similar work environment a plu.* Requires the ability to read, write and perform basic arithmetic computations* Requires dexterity, basic mechanical reasoning, problem solving and the ability to learn* Requires strong verbal and interpersonal skills Compensation up to $20.00/hour, based on skills, experience, qualifications and testingPremium healthcare benefits, including medical, dental and vision coverageRetirement savings accountCompany paid life insurance, vacation, holidays and sick daysFull-time, 40-hour work week plus overtime opportunitiesWhat are you waiting for? Apply Now!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • South Burlington, Vermont
      • Temp to Perm
      • $18.00 per hour
      • 6:00 AM - 6:00 PM
      We're hiring for Level 1 Production Technicians for a local manufacturer in Williston, VT and Essex, VT!Sign on bonuses, pay increases, 401K, paid vacations/holidays, and health insurance available after full time hire!If you're looking to start a new career with a growing company with attractive starting rates and benefits, this is the job for you.Shift:Monday-Wednesday, every other Thursday6:00am - 6:00pmNO weekends!Responsibilities:Operating manufacturing equipment and maintaining compliance with high standards for safety and quality.Load and unload equipment with raw materials.Actively engaged in learning machine operations and apply learnings to perform work to standard.Complete changeovers and cleans, including line clearance & pre-checks, following standard work.Comply with all safety policies and procedures and demonstrate safe behaviors at all times.Quality check final product.Working hours: 6:00 AM - 6:00 PMSkills:Must be able to lift up to 40 lbs.Must be able to stand for full shift.Reliability is a must.Previous manufacturing experience a plus, but not required! We have training programs set in place to ensure your success.Education:No Degree RequiredExperience:0-1 yearsQualifications:Background check requiredSteel toe footwear Call or text "COFFEE" to 802-864-5900 to start same week!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We're hiring for Level 1 Production Technicians for a local manufacturer in Williston, VT and Essex, VT!Sign on bonuses, pay increases, 401K, paid vacations/holidays, and health insurance available after full time hire!If you're looking to start a new career with a growing company with attractive starting rates and benefits, this is the job for you.Shift:Monday-Wednesday, every other Thursday6:00am - 6:00pmNO weekends!Responsibilities:Operating manufacturing equipment and maintaining compliance with high standards for safety and quality.Load and unload equipment with raw materials.Actively engaged in learning machine operations and apply learnings to perform work to standard.Complete changeovers and cleans, including line clearance & pre-checks, following standard work.Comply with all safety policies and procedures and demonstrate safe behaviors at all times.Quality check final product.Working hours: 6:00 AM - 6:00 PMSkills:Must be able to lift up to 40 lbs.Must be able to stand for full shift.Reliability is a must.Previous manufacturing experience a plus, but not required! We have training programs set in place to ensure your success.Education:No Degree RequiredExperience:0-1 yearsQualifications:Background check requiredSteel toe footwear Call or text "COFFEE" to 802-864-5900 to start same week!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • South Burlington, Vermont
      • Temp to Perm
      • $19.25 per hour
      • 6:00 PM - 6:00 AM
      We're hiring for Production Technicians for a local manufacturer in Williston, VT and Essex, VT!Sign on bonuses, pay increases, 401K, paid vacations/holidays, and health insurance available after full time hireShift:Monday-Wednesday, every other Thursday6:00pm - 6:15amNO weekends!If you're looking to start a new career with a growing company with attractive starting rates and benefits, this is the job for you.Responsibilities:Operating manufacturing equipment and maintaining compliance with high standards for safety and quality.Load and unload equipment with raw materials.Actively engaged in learning machine operations and apply learnings to perform work to standard.Complete changeovers and cleans, including line clearance & pre-checks, following standard work.Comply with all safety policies and procedures and demonstrate safe behaviors at all times.Quality check final product.Working hours: 6:00 PM - 6:00 AMSkills:Must be able to lift up to 40 lbs.Must be able to stand for full shift.Reliability is a must.Previous manufacturing experience a plus, but not required! We have training programs set in place to ensure your success.Education:TradeExperience:0-1 yearsQualifications:Background check requiredSteel toe footwear Call or text "COFFEE" to 802-864-5900 to start same week!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We're hiring for Production Technicians for a local manufacturer in Williston, VT and Essex, VT!Sign on bonuses, pay increases, 401K, paid vacations/holidays, and health insurance available after full time hireShift:Monday-Wednesday, every other Thursday6:00pm - 6:15amNO weekends!If you're looking to start a new career with a growing company with attractive starting rates and benefits, this is the job for you.Responsibilities:Operating manufacturing equipment and maintaining compliance with high standards for safety and quality.Load and unload equipment with raw materials.Actively engaged in learning machine operations and apply learnings to perform work to standard.Complete changeovers and cleans, including line clearance & pre-checks, following standard work.Comply with all safety policies and procedures and demonstrate safe behaviors at all times.Quality check final product.Working hours: 6:00 PM - 6:00 AMSkills:Must be able to lift up to 40 lbs.Must be able to stand for full shift.Reliability is a must.Previous manufacturing experience a plus, but not required! We have training programs set in place to ensure your success.Education:TradeExperience:0-1 yearsQualifications:Background check requiredSteel toe footwear Call or text "COFFEE" to 802-864-5900 to start same week!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • South Burlington, Vermont
      • Temp to Perm
      • $20.25 per hour
      • 6:00 AM - 6:00 PM
      We're hiring for Production Technicians for a local manufacturer in Williston, VT and Essex, VT!Sign on bonuses, pay increases, 401K, paid vacations/holidays, and health insurance available after full time hire!Shift:Friday-Sunday, every other Thursday6:00am - 6:00pmIf you're looking to start a new career with a growing company with attractive starting rates and benefits, this is the job for you.Responsibilities:Operating manufacturing equipment and maintaining compliance with high standards for safety and quality.Load and unload equipment with raw materials.Actively engaged in learning machine operations and apply learnings to perform work to standard.Complete changeovers and cleans, including line clearance & pre-checks, following standard work.Comply with all safety policies and procedures and demonstrate safe behaviors at all times.Quality check final product.Working hours: 6:00 AM - 6:00 PMSkills:Must be able to lift up to 40 lbs.Must be able to stand for full shift.Reliability is a must.Previous manufacturing experience a plus, but not required! We have training programs set in place to ensure your success.Education:No Degree RequiredExperience:0-1 yearsQualifications:Background check requiredSteel toe footwear Call or text "COFFEE" to 802-864-5900 to start same week!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      We're hiring for Production Technicians for a local manufacturer in Williston, VT and Essex, VT!Sign on bonuses, pay increases, 401K, paid vacations/holidays, and health insurance available after full time hire!Shift:Friday-Sunday, every other Thursday6:00am - 6:00pmIf you're looking to start a new career with a growing company with attractive starting rates and benefits, this is the job for you.Responsibilities:Operating manufacturing equipment and maintaining compliance with high standards for safety and quality.Load and unload equipment with raw materials.Actively engaged in learning machine operations and apply learnings to perform work to standard.Complete changeovers and cleans, including line clearance & pre-checks, following standard work.Comply with all safety policies and procedures and demonstrate safe behaviors at all times.Quality check final product.Working hours: 6:00 AM - 6:00 PMSkills:Must be able to lift up to 40 lbs.Must be able to stand for full shift.Reliability is a must.Previous manufacturing experience a plus, but not required! We have training programs set in place to ensure your success.Education:No Degree RequiredExperience:0-1 yearsQualifications:Background check requiredSteel toe footwear Call or text "COFFEE" to 802-864-5900 to start same week!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $15.00 - $17.00 per hour
      • 7:00 AM - 3:15 PM
      Perform sub assembly and final assembly processes on a variety of mechanical and electrical assemblies. Will use calibrated equipment and machinery, engineering and simple drawings, schematics, as well as written and verbal instructions to perform basic assembly, mechanical, and electrical functions.Responsibilities:The candidate will spray paint a wide variety of parts with lacquers, enamel, and undercoats to produce flat, gloss, semi-gloss, wrinkle and suede finishes.Working hours: 7:00 AM - 3:15 PMSkills:--A positive can-do attitude--Refuse to be satisfied with average performance--Able to use hands or fingers, talk and hear, reach, bend, stoop, stand for long periods of time, reach over head--Able to lift up to 50 lbsEducation:High SchoolExperience:0-1 yearsQualifications:???High School Diploma or equivalent???Entry level or 1-2 yrs of Assembly experience or 1-2 yrs powder and liquid industrial painting experience. ???Requires passing a pre-employment screening, which includes a drug screen. DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAYSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Perform sub assembly and final assembly processes on a variety of mechanical and electrical assemblies. Will use calibrated equipment and machinery, engineering and simple drawings, schematics, as well as written and verbal instructions to perform basic assembly, mechanical, and electrical functions.Responsibilities:The candidate will spray paint a wide variety of parts with lacquers, enamel, and undercoats to produce flat, gloss, semi-gloss, wrinkle and suede finishes.Working hours: 7:00 AM - 3:15 PMSkills:--A positive can-do attitude--Refuse to be satisfied with average performance--Able to use hands or fingers, talk and hear, reach, bend, stoop, stand for long periods of time, reach over head--Able to lift up to 50 lbsEducation:High SchoolExperience:0-1 yearsQualifications:???High School Diploma or equivalent???Entry level or 1-2 yrs of Assembly experience or 1-2 yrs powder and liquid industrial painting experience. ???Requires passing a pre-employment screening, which includes a drug screen. DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAYSpherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Hayward, Minnesota
      • Permanent
      • $16.00 - $17.00 per hour
      • 5:00 AM - 2:15 PM
      Perform sub assembly and final assembly processes on a variety of mechanical and electrical assemblies. Will use calibrated equipment and machinery, engineering and simple drawings, schematics, as well as written and verbal instructions to perform basic assembly, mechanical, and electrical functions. Will also maintain documentation on work performed, match work procedures with ISO documents, and read and interpret sketches and/or blueprints to describe or identify non-conformance. Performs work of appreciable difficulty, where areas are not easily accessible due to unusual contours and irregular shapes, as well as raised or depressed surfaces. Performs visual inspection of all material.Responsibilities:???Utilize hand tools, power tools and hardware to assemble and wire standard and engineered products to customer specifications and quality standards with the aid of supervision or trainers.???Perform job set-up by obtaining necessary/required parts, drawings, and schematics. Check for correctness of parts by referencing the bill of material. Read and interpret drawings and schematics.???Communicate with engineers, designers, and technicians to resolve assembly discrepancies.???Perform ongoing inspection of product during assembly and wiring process and prior to product???s shipment.???Lift and position assemblies. Operate overhead hoist/crane to assist with the lifting and control of moving/positioning of assembly.???Maintain a clean, safe, and orderly work area.???Familiar with mechanical and electromechanical components.???Perform checks for quality of parts and adjust as required.???Contributes to the efficiency and effectiveness of its customers by offering suggestions and directing or participating as an active member of a team.Working hours: 5:00 AM - 2:15 PMSkills:--Requires a thorough knowledge of advanced shop mathematics, inspection processes, and precision measuring instruments--Experience is a factory setting--Requires a thorough knowledge of machine shop practices and production methodsEducation:High SchoolExperience:0-1 yearsQualifications:???Requires a high school diploma or GED???Regularly required to use hands or fingers, reach, bend, twist, lifting up to 30 lbs., and talk and hear.???Requires passing pre-employment screening, including a drug screen DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Perform sub assembly and final assembly processes on a variety of mechanical and electrical assemblies. Will use calibrated equipment and machinery, engineering and simple drawings, schematics, as well as written and verbal instructions to perform basic assembly, mechanical, and electrical functions. Will also maintain documentation on work performed, match work procedures with ISO documents, and read and interpret sketches and/or blueprints to describe or identify non-conformance. Performs work of appreciable difficulty, where areas are not easily accessible due to unusual contours and irregular shapes, as well as raised or depressed surfaces. Performs visual inspection of all material.Responsibilities:???Utilize hand tools, power tools and hardware to assemble and wire standard and engineered products to customer specifications and quality standards with the aid of supervision or trainers.???Perform job set-up by obtaining necessary/required parts, drawings, and schematics. Check for correctness of parts by referencing the bill of material. Read and interpret drawings and schematics.???Communicate with engineers, designers, and technicians to resolve assembly discrepancies.???Perform ongoing inspection of product during assembly and wiring process and prior to product???s shipment.???Lift and position assemblies. Operate overhead hoist/crane to assist with the lifting and control of moving/positioning of assembly.???Maintain a clean, safe, and orderly work area.???Familiar with mechanical and electromechanical components.???Perform checks for quality of parts and adjust as required.???Contributes to the efficiency and effectiveness of its customers by offering suggestions and directing or participating as an active member of a team.Working hours: 5:00 AM - 2:15 PMSkills:--Requires a thorough knowledge of advanced shop mathematics, inspection processes, and precision measuring instruments--Experience is a factory setting--Requires a thorough knowledge of machine shop practices and production methodsEducation:High SchoolExperience:0-1 yearsQualifications:???Requires a high school diploma or GED???Regularly required to use hands or fingers, reach, bend, twist, lifting up to 30 lbs., and talk and hear.???Requires passing pre-employment screening, including a drug screen DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Bristol, Tennessee
      • Temp to Perm
      • $13.00 - $15.00 per hour
      • Various Shifts Available
      MACHINE & MOLD OPERATORSSTRONGWELL in Bristol VA needs MACHINE AND MOLD OPERATORS on multiple shifts. Temp to hire opportunity after 30/60 days based on ATTENDANCE AND PERFORMANCE.Once hired on perm, the company benefits include: 10 paid holidays, bereavement, paid vacation, safety glasses and safety shoes bonus. After thirty days of employment/1st of the month, eligible for benefits which includes medical, dental, prescription, also life insurance and short term disability, 401-K with 4% employer match and also a profit sharing plan.Pay rate: $13 hr with $.1.00 shift diff for 2nd and 3rd shift. **Openings on 2nd and 3rd shift Shift Times: 3pm-11pm; 11pm-7am ***Must be able to work OT on Saturday as needed________________________________________Responsibilities:Operators fabricate fiberglass molds using glass rovings & resin mixture to create fiberglass grates. Construction exp. a plus, most positions on 2nd and 3rd.Working hours: Various Shifts AvailableSkills:hand/power toolspainting machine operationEducation:No Degree RequiredExperience:0-1 yearsQualifications:REQUIREMENTS:- Manufacturing or construction experience a plus- Able to read a tape measure- Good work history and attendance record- Work in a fast environment with strong smells- Bending, stooping, and lifting up to 50 lbs. often.- Ability to successfully complete DS and background Eligible candidates may apply at www.spherion.com/apply then contact our office at 423-283-0607 for a phone interview and to be scheduled for a plant tour.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      MACHINE & MOLD OPERATORSSTRONGWELL in Bristol VA needs MACHINE AND MOLD OPERATORS on multiple shifts. Temp to hire opportunity after 30/60 days based on ATTENDANCE AND PERFORMANCE.Once hired on perm, the company benefits include: 10 paid holidays, bereavement, paid vacation, safety glasses and safety shoes bonus. After thirty days of employment/1st of the month, eligible for benefits which includes medical, dental, prescription, also life insurance and short term disability, 401-K with 4% employer match and also a profit sharing plan.Pay rate: $13 hr with $.1.00 shift diff for 2nd and 3rd shift. **Openings on 2nd and 3rd shift Shift Times: 3pm-11pm; 11pm-7am ***Must be able to work OT on Saturday as needed________________________________________Responsibilities:Operators fabricate fiberglass molds using glass rovings & resin mixture to create fiberglass grates. Construction exp. a plus, most positions on 2nd and 3rd.Working hours: Various Shifts AvailableSkills:hand/power toolspainting machine operationEducation:No Degree RequiredExperience:0-1 yearsQualifications:REQUIREMENTS:- Manufacturing or construction experience a plus- Able to read a tape measure- Good work history and attendance record- Work in a fast environment with strong smells- Bending, stooping, and lifting up to 50 lbs. often.- Ability to successfully complete DS and background Eligible candidates may apply at www.spherion.com/apply then contact our office at 423-283-0607 for a phone interview and to be scheduled for a plant tour.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Bristol, Virginia
      • Temp to Perm
      • $13.00 - $15.00 per hour
      • Various Shifts Available
      MACHINE & MOLD OPERATORSSTRONGWELL in Bristol VA needs MACHINE AND MOLD OPERATORS on multiple shifts. Temp to hire opportunity after 30/60 days based on ATTENDANCE AND PERFORMANCE.Once hired on perm, the company benefits include: 10 paid holidays, bereavement, paid vacation, safety glasses and safety shoes bonus. After thirty days of employment/1st of the month, eligible for benefits which includes medical, dental, prescription, also life insurance and short term disability, 401-K with 4% employer match and also a profit sharing plan.Pay rate: $13 hr with $.1.00 shift diff for 2nd and 3rd shift. **Openings on 2nd and 3rd shift Shift Times: 3pm-11pm; 11pm-7am ***Must be able to work OT on Saturday as needed________________________________________Responsibilities:Operators fabricate fiberglass molds using glass rovings & resin mixture to create fiberglass grates. Construction exp. a plus, most positions on 2nd and 3rd.Working hours: Various Shifts AvailableSkills:hand/power toolspainting machine operationEducation:No Degree RequiredExperience:0-1 yearsQualifications:REQUIREMENTS:- Manufacturing or construction experience a plus- Able to read a tape measure- Good work history and attendance record- Work in a fast environment with strong smells- Bending, stooping, and lifting up to 50 lbs. often.- Ability to successfully complete DS and background Eligible candidates may apply at www.spherion.com/apply then contact our office at 423-283-0607 for a phone interview and to be scheduled for a plant tour.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      MACHINE & MOLD OPERATORSSTRONGWELL in Bristol VA needs MACHINE AND MOLD OPERATORS on multiple shifts. Temp to hire opportunity after 30/60 days based on ATTENDANCE AND PERFORMANCE.Once hired on perm, the company benefits include: 10 paid holidays, bereavement, paid vacation, safety glasses and safety shoes bonus. After thirty days of employment/1st of the month, eligible for benefits which includes medical, dental, prescription, also life insurance and short term disability, 401-K with 4% employer match and also a profit sharing plan.Pay rate: $13 hr with $.1.00 shift diff for 2nd and 3rd shift. **Openings on 2nd and 3rd shift Shift Times: 3pm-11pm; 11pm-7am ***Must be able to work OT on Saturday as needed________________________________________Responsibilities:Operators fabricate fiberglass molds using glass rovings & resin mixture to create fiberglass grates. Construction exp. a plus, most positions on 2nd and 3rd.Working hours: Various Shifts AvailableSkills:hand/power toolspainting machine operationEducation:No Degree RequiredExperience:0-1 yearsQualifications:REQUIREMENTS:- Manufacturing or construction experience a plus- Able to read a tape measure- Good work history and attendance record- Work in a fast environment with strong smells- Bending, stooping, and lifting up to 50 lbs. often.- Ability to successfully complete DS and background Eligible candidates may apply at www.spherion.com/apply then contact our office at 423-283-0607 for a phone interview and to be scheduled for a plant tour.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $18.00 - $19.00 per hour
      • 2:15 PM - 1:25 AM
      This person will engage in a variety of tasks in the Assembly Cell.Responsibilities:Some responsibilities will include; TIG welding and gas soldering. Will perform quality check of parts and adjust as required.Working hours: 2:15 PM - 1:25 AMSkills:--Required to be on their feet using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.--Must be able to work in repetitive motion with hands, wrist, shoulders, etc. --Must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. --Individuals will work near moving mechanical parts of machinery and electrically activated devices. --Must be able to work responsibly with limited supervision--Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process--Overtime is typically voluntary. However, during busy production periods overtime will be required--Other duties as assignedEducation:High SchoolExperience:0-1 yearsQualifications:???High-School Diploma or equivalent ???Must have some welding experience. ???Must be detail oriented, self-motivated, and able to keep area clean and organized. ???Must be able to retain training information. ???Requires a pre-employment screening, which includes a drug screen. Call to Action: DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This person will engage in a variety of tasks in the Assembly Cell.Responsibilities:Some responsibilities will include; TIG welding and gas soldering. Will perform quality check of parts and adjust as required.Working hours: 2:15 PM - 1:25 AMSkills:--Required to be on their feet using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.--Must be able to work in repetitive motion with hands, wrist, shoulders, etc. --Must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. --Individuals will work near moving mechanical parts of machinery and electrically activated devices. --Must be able to work responsibly with limited supervision--Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process--Overtime is typically voluntary. However, during busy production periods overtime will be required--Other duties as assignedEducation:High SchoolExperience:0-1 yearsQualifications:???High-School Diploma or equivalent ???Must have some welding experience. ???Must be detail oriented, self-motivated, and able to keep area clean and organized. ???Must be able to retain training information. ???Requires a pre-employment screening, which includes a drug screen. Call to Action: DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $16.00 - $17.00 per hour
      • 5:00 AM - 3:15 PM
      This person will engage in a variety of tasks in the Assembly Cell.Responsibilities:Some responsibilities will include; TIG welding and gas soldering. Will perform quality check of parts and adjust as required.Working hours: 5:00 AM - 3:15 PMSkills:--Required to be on their feet using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.--Must be able to work in repetitive motion with hands, wrist, shoulders, etc. --Must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. --Individuals will work near moving mechanical parts of machinery and electrically activated devices. --Must be able to work responsibly with limited supervision--Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process--Overtime is typically voluntary. However, during busy production periods overtime will be required--Other duties as assignedEducation:High SchoolExperience:0-1 yearsQualifications:???High-School Diploma or equivalent ???Must have some welding experience. ???Must be detail oriented, self-motivated, and able to keep area clean and organized. ???Must be able to retain training information. ???Requires a pre-employment screening, which includes a drug screen. DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This person will engage in a variety of tasks in the Assembly Cell.Responsibilities:Some responsibilities will include; TIG welding and gas soldering. Will perform quality check of parts and adjust as required.Working hours: 5:00 AM - 3:15 PMSkills:--Required to be on their feet using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.--Must be able to work in repetitive motion with hands, wrist, shoulders, etc. --Must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. --Individuals will work near moving mechanical parts of machinery and electrically activated devices. --Must be able to work responsibly with limited supervision--Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process--Overtime is typically voluntary. However, during busy production periods overtime will be required--Other duties as assignedEducation:High SchoolExperience:0-1 yearsQualifications:???High-School Diploma or equivalent ???Must have some welding experience. ???Must be detail oriented, self-motivated, and able to keep area clean and organized. ???Must be able to retain training information. ???Requires a pre-employment screening, which includes a drug screen. DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $55,000 - $70,000 per year
      • 6:00 AM - 4:00 PM
      This position designs and develops new models, mechanisms, devices, machinery, or adaptations for products under the direction of the Engineering Manager. Responsible for correct proportions, consideration of stress, speed, motion, weight, operational details, customer specifications, and the incorporation of usable parts that may be in production. Designs are to include appropriate dimensions, tolerances, fasteners, and joining requirements. Works with engineer personnel to complete the design documentation package including BOM's and routings.Responsibilities: Performs complex engineering calculations using algebraic, trigonometric, and geometric formulas.  Uses standard product engineering data to develop product configuration. Analyze designs for ability to function safely and without fail over many years of product use.  Utilizes computer aided design techniques to perform applicable design work and stress simulations.  Acts as the project lead for major projects and may supervise the activities of other designers and drafters to ensure that products are completed properly and on time. Follow new product design through all phases of manufacturing.  May oversee and participate in experimental manufacture and testing of finished product.  This engineer may be required to do some fabrication, welding, assembly, troubleshooting and testing.Working hours: 6:00 AM - 4:00 PMSkills:- Requires technical knowledge and ability to perform stress and vibration analysis on products.- Requires use of SolidWorks to create product designs.- Experience in structural and equipment design beneficial.- Must be able to manage time to complete projects on time.- Experience designing pneumatic, hydraulic and electrical systems also a plus.Requires passing a pre-employment screening.Education:BachelorsExperience:1-4 yearsQualifications: Requires a bachelors degree in mechanical engineering or 5+ years of experience in related field.  SolidWorks experience. Experience in structural and equipment design beneficial. Requires passing a pre-employment screening. DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This position designs and develops new models, mechanisms, devices, machinery, or adaptations for products under the direction of the Engineering Manager. Responsible for correct proportions, consideration of stress, speed, motion, weight, operational details, customer specifications, and the incorporation of usable parts that may be in production. Designs are to include appropriate dimensions, tolerances, fasteners, and joining requirements. Works with engineer personnel to complete the design documentation package including BOM's and routings.Responsibilities: Performs complex engineering calculations using algebraic, trigonometric, and geometric formulas.  Uses standard product engineering data to develop product configuration. Analyze designs for ability to function safely and without fail over many years of product use.  Utilizes computer aided design techniques to perform applicable design work and stress simulations.  Acts as the project lead for major projects and may supervise the activities of other designers and drafters to ensure that products are completed properly and on time. Follow new product design through all phases of manufacturing.  May oversee and participate in experimental manufacture and testing of finished product.  This engineer may be required to do some fabrication, welding, assembly, troubleshooting and testing.Working hours: 6:00 AM - 4:00 PMSkills:- Requires technical knowledge and ability to perform stress and vibration analysis on products.- Requires use of SolidWorks to create product designs.- Experience in structural and equipment design beneficial.- Must be able to manage time to complete projects on time.- Experience designing pneumatic, hydraulic and electrical systems also a plus.Requires passing a pre-employment screening.Education:BachelorsExperience:1-4 yearsQualifications: Requires a bachelors degree in mechanical engineering or 5+ years of experience in related field.  SolidWorks experience. Experience in structural and equipment design beneficial. Requires passing a pre-employment screening. DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $18.00 - $19.00 per hour
      • 3:10 PM - 1:30 AM
      This person will engage in the assembling of parts or assemblies into units by interpreting specifications, blueprints, and job orders.Responsibilities:This person will also engage in foaming and tend to machine that sprays resins and foaming materials. This person will also work on duties as assigned by the supervisor or lead person.Working hours: 3:10 PM - 1:30 AMSkills:The ideal candidate will have the following:--The foamer is required to be on their feet using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.--The foamer must be able to work in repetitive motion with hands, wrist, shoulders, etc. --The foamer must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. --Individuals will work near moving mechanical parts of machinery and electrically activated devices. --Entry level mechanical level aptitude desired, experience working in manufacturing area is a plus--Must be able to work responsibly with limited supervision--Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process--Overtime is typically voluntary. However, during busy production periods overtime will be required--Other duties as assignedEducation:High SchoolExperience:0-1 yearsQualifications:???High school diploma or equivalent.???Requires passing a pre-employment screening, which includes a drug screen. Call to Action: This is a DIRECT HIRE (permanent) position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! Great way to get your foot in the door for these BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This person will engage in the assembling of parts or assemblies into units by interpreting specifications, blueprints, and job orders.Responsibilities:This person will also engage in foaming and tend to machine that sprays resins and foaming materials. This person will also work on duties as assigned by the supervisor or lead person.Working hours: 3:10 PM - 1:30 AMSkills:The ideal candidate will have the following:--The foamer is required to be on their feet using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.--The foamer must be able to work in repetitive motion with hands, wrist, shoulders, etc. --The foamer must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. --Individuals will work near moving mechanical parts of machinery and electrically activated devices. --Entry level mechanical level aptitude desired, experience working in manufacturing area is a plus--Must be able to work responsibly with limited supervision--Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process--Overtime is typically voluntary. However, during busy production periods overtime will be required--Other duties as assignedEducation:High SchoolExperience:0-1 yearsQualifications:???High school diploma or equivalent.???Requires passing a pre-employment screening, which includes a drug screen. Call to Action: This is a DIRECT HIRE (permanent) position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! Great way to get your foot in the door for these BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, and more!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Hayward, Minnesota
      • Permanent
      • $19.00 - $29.00 per hour
      • 6:00 AM - 3:15 PM
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment.Responsibilities:???Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.???Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.???Fabricate components from blueprints and verbal instructions.???Perform assignments in accordance with written quality procedures.???Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.???Ensure compliance to safety rules and procedures.Working hours: 6:00 AM - 3:15 PMSkills:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Education:High SchoolExperience:1-4 yearsQualifications:???The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.???The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.???Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.???Individuals will work near moving mechanical parts of machinery and electrically activated devices. ???Individuals are occasionally exposed to airborne particles.Perform math skills of addition, subtraction, multiplication, and division???Knowledge of decimals, fractions, and metric/English conversions???Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new welders???Lift and position parts into fixtures???Employment is contingent upon the results of a pre-employment drug examination. DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff wil
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment.Responsibilities:???Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.???Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.???Fabricate components from blueprints and verbal instructions.???Perform assignments in accordance with written quality procedures.???Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.???Ensure compliance to safety rules and procedures.Working hours: 6:00 AM - 3:15 PMSkills:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Education:High SchoolExperience:1-4 yearsQualifications:???The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.???The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.???Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.???Individuals will work near moving mechanical parts of machinery and electrically activated devices. ???Individuals are occasionally exposed to airborne particles.Perform math skills of addition, subtraction, multiplication, and division???Knowledge of decimals, fractions, and metric/English conversions???Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new welders???Lift and position parts into fixtures???Employment is contingent upon the results of a pre-employment drug examination. DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff wil
      • Albert Lea, Minnesota
      • Permanent
      • $20.00 - $26.00 per hour
      • 7:00 AM - 3:15 PM
      Works with engineers and production to develop new methods and procedures on assembling and field installation of new high-level equipment designs. Works with production personnel to optimize existing methods and procedures. Accomplishes various production assembly functions that are complicated or intricate. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Operates hand or power tools, or production equipment. Must have thorough understanding of part prints (tolerances, symbols, etc.), perform checks for quality of parts and adjust as required. Good communication skills, written and/or verbal, when corresponding with customers on field installations and service requirements.Travel is required with this position and can be extensive at times. Which requires flexibility to working hours and days. Weekends may be required at times, however minimal.Responsibilities: Performs work as outlined on install or warranty work with efficiency and accuracy, in accordance with company standards.  Diagnoses cause of any malfunction and performs repair.  Communicates with production department to obtain needed parts.  Saves and tags parts of the job if under warranty or if requested by the customer.  Examines equipment to determine if further safety or service work is required or recommended.  Communicates with customer immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time.  Documents all work performed and recommended on the repair.  Cycle equipment to verify customers concern and after repairs to verify repairs corrected customers concerns.  Report machinery defects or malfunctions to supervisor and/or customer.  Keeps shop area neat and clean.  Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc.  Operates all tools and equipment in a safe manner.  Reports any safety issues immediately to management.Working hours: 7:00 AM - 3:15 PMSkills:--Degree, diploma, or certificate in Industrial Maintenance or five years of installation/maintenance experience. --Must have experience with electrical wiring and reading schematics for electrical, hydraulics, and pneumatics. Knowledge of programming is a plus. --Must have mechanical and equipment assembly aptitude. Welding and or machining experience is a plus.--Must have good communication skills, problem solving skills and be well organized. --Must be able to work a flexible schedule as this position includes travel to customers' facilities.Education:High SchoolExperience:1-4 yearsQualifications: Must be able to travel up to 30% of the time.  Individuals will work near moving mechanical parts of machinery and electrically activated devices.  Perform math skills of addition, subtraction, multiplication, and division. Knowledge of decimals, fractions, and metric/English conversions. Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture.  Using a specified training format, work closely in training new installation/service technicians. Requires a pre-employment screening which includes, however not limited to, a drug screen and driving report. DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Rei
      Works with engineers and production to develop new methods and procedures on assembling and field installation of new high-level equipment designs. Works with production personnel to optimize existing methods and procedures. Accomplishes various production assembly functions that are complicated or intricate. Assembles products or sub-assemblies according to verbal or written instructions, or by following drawings or diagrams. Operates hand or power tools, or production equipment. Must have thorough understanding of part prints (tolerances, symbols, etc.), perform checks for quality of parts and adjust as required. Good communication skills, written and/or verbal, when corresponding with customers on field installations and service requirements.Travel is required with this position and can be extensive at times. Which requires flexibility to working hours and days. Weekends may be required at times, however minimal.Responsibilities: Performs work as outlined on install or warranty work with efficiency and accuracy, in accordance with company standards.  Diagnoses cause of any malfunction and performs repair.  Communicates with production department to obtain needed parts.  Saves and tags parts of the job if under warranty or if requested by the customer.  Examines equipment to determine if further safety or service work is required or recommended.  Communicates with customer immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time.  Documents all work performed and recommended on the repair.  Cycle equipment to verify customers concern and after repairs to verify repairs corrected customers concerns.  Report machinery defects or malfunctions to supervisor and/or customer.  Keeps shop area neat and clean.  Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc.  Operates all tools and equipment in a safe manner.  Reports any safety issues immediately to management.Working hours: 7:00 AM - 3:15 PMSkills:--Degree, diploma, or certificate in Industrial Maintenance or five years of installation/maintenance experience. --Must have experience with electrical wiring and reading schematics for electrical, hydraulics, and pneumatics. Knowledge of programming is a plus. --Must have mechanical and equipment assembly aptitude. Welding and or machining experience is a plus.--Must have good communication skills, problem solving skills and be well organized. --Must be able to work a flexible schedule as this position includes travel to customers' facilities.Education:High SchoolExperience:1-4 yearsQualifications: Must be able to travel up to 30% of the time.  Individuals will work near moving mechanical parts of machinery and electrically activated devices.  Perform math skills of addition, subtraction, multiplication, and division. Knowledge of decimals, fractions, and metric/English conversions. Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture.  Using a specified training format, work closely in training new installation/service technicians. Requires a pre-employment screening which includes, however not limited to, a drug screen and driving report. DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Rei
      • Northwood, Iowa
      • Permanent
      • $18.11 - $22.05 per hour
      • 6:00 AM - 4:30 PM
      This position is held by the highly skilled machine operators.Responsibilities:The operator must be able to setup, trouble-shoot and safely operate equipment. The position also, requires the ability to train lesser skilled operators and trainees in all aspects of safety, quality, and efficient machine operation. Adhere to all safety policies. Know and understand specific safety requirements for each piece of equipment. Wear appropriate safety equipment for each job assigned. Be able to instruct any assistant in the safety aspects of the job. Recognize and suggest course of action for any safety related issue with a piece of equipment.Working hours: 6:00 AM - 4:30 PMSkills:Must be able to communicate with supervisors and management in English. Basic math/3 dimensional coordinates understanding. Able to properly complete necessary work documents such as machining logs, pre/post inspections, etc. Follows standard work instructions, processes, and procedures. Meet daily, weekly, and monthly production goals. Technical abilities to complete daily operator PMs, perform tool calibrations, etc. Can accurately measure work using tape measure and/or calipers. Understands quality parameters and specifications and performs high-quality work. Reads and understands detailed engineering specs and drawings. Completes schedules in order of priority Complete and comply with all quality initiative standards and directives. Qualified to safely operate, setup and program category I and II equipment. Must be able to interpolate dimensions and equipment setup parameters based on rough information and limited drawings.Education:No Degree RequiredExperience:1-4 yearsQualifications:Requires 3-5 years in woodworking/production equipment operation. Great PAY! Great BENEFITS! Great HOURS! Great REPUTATION! Continuously growing company is adding an entire new line, and in need of skilled workers! This is a Direct Hire position and full-time employees are eligible for the following benefits: Medical, Dental, Vision, Life Insurance Flexible spending accounts???medical and dependent care 401(k) with a company match Profit Sharing Accidental death and dismemberment Disability (short-term and long-term) Paid time off Paid holidays1st Shift. 10hr shift 6am-4:30pm M-Th. Fri is OT as required (usually 5 or 8hrs)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      This position is held by the highly skilled machine operators.Responsibilities:The operator must be able to setup, trouble-shoot and safely operate equipment. The position also, requires the ability to train lesser skilled operators and trainees in all aspects of safety, quality, and efficient machine operation. Adhere to all safety policies. Know and understand specific safety requirements for each piece of equipment. Wear appropriate safety equipment for each job assigned. Be able to instruct any assistant in the safety aspects of the job. Recognize and suggest course of action for any safety related issue with a piece of equipment.Working hours: 6:00 AM - 4:30 PMSkills:Must be able to communicate with supervisors and management in English. Basic math/3 dimensional coordinates understanding. Able to properly complete necessary work documents such as machining logs, pre/post inspections, etc. Follows standard work instructions, processes, and procedures. Meet daily, weekly, and monthly production goals. Technical abilities to complete daily operator PMs, perform tool calibrations, etc. Can accurately measure work using tape measure and/or calipers. Understands quality parameters and specifications and performs high-quality work. Reads and understands detailed engineering specs and drawings. Completes schedules in order of priority Complete and comply with all quality initiative standards and directives. Qualified to safely operate, setup and program category I and II equipment. Must be able to interpolate dimensions and equipment setup parameters based on rough information and limited drawings.Education:No Degree RequiredExperience:1-4 yearsQualifications:Requires 3-5 years in woodworking/production equipment operation. Great PAY! Great BENEFITS! Great HOURS! Great REPUTATION! Continuously growing company is adding an entire new line, and in need of skilled workers! This is a Direct Hire position and full-time employees are eligible for the following benefits: Medical, Dental, Vision, Life Insurance Flexible spending accounts???medical and dependent care 401(k) with a company match Profit Sharing Accidental death and dismemberment Disability (short-term and long-term) Paid time off Paid holidays1st Shift. 10hr shift 6am-4:30pm M-Th. Fri is OT as required (usually 5 or 8hrs)Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $16.00 - $17.00 per hour
      • 6:00 AM - 2:15 PM
      Perform sub assembly and final assembly processes on a variety of mechanical and electrical assemblies. Will use calibrated equipment and machinery, engineering and simple drawings, schematics, as well as written and verbal instructions to perform basic assembly, mechanical, and electrical functions. Will also maintain documentation on work performed, match work procedures with ISO documents, and read and interpret sketches and/or blueprints to describe or identify non-conformance.Responsibilities:???Utilize hand tools, power tools and hardware to assemble and wire standard and engineered products to customer specifications and quality standards with the aid of supervision or trainers.???Apply acquired trade skills such as electrical, mechanical and plumbing to complete assembly process.???Follow ISO procedures.???Perform job set-up by obtaining necessary/required parts, drawings, and schematics. Check for correctness of parts by referencing the bill of material. Read and interpret drawings and schematics.???Communicate with engineers, designers, and technicians to resolve assembly discrepancies.???Perform ongoing inspection of product during assembly and wiring process and prior to product???s shipment.???Lift and position assemblies. Operate overhead hoist/crane to assist with the lifting and control of moving/positioning of assembly.???Maintain a clean, safe, and orderly work area.???Set-up and performs Assembly Department operations with minimum supervision.???Familiar with mechanical and electromechanical components.???Thorough understanding of part prints (tolerances, symbols, etc.).???Perform checks for quality of parts and make adjustments as required.???Perform other duties as assigned.Working hours: 6:00 AM - 2:15 PMSkills:--Familiar with mechanical and electromechanical components--Able to read and interpret routings, bills of material, assembly drawings, work instructions and notes--Good motivation and communication skills--Problem solving skillsEducation:High SchoolExperience:1-4 yearsQualifications:???High School Diploma or equivalent???Entry level or 1-2 years of assembly experience ???Manual dexterity???Ability to work in a team setting???A positive can-do attitude???Refuse to be satisfied with average performance???Able to use hands or fingers, talk and hear, reach, bend, stoop, stand for long periods of time, reach over head???Able to lift up to 50 lbs DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Perform sub assembly and final assembly processes on a variety of mechanical and electrical assemblies. Will use calibrated equipment and machinery, engineering and simple drawings, schematics, as well as written and verbal instructions to perform basic assembly, mechanical, and electrical functions. Will also maintain documentation on work performed, match work procedures with ISO documents, and read and interpret sketches and/or blueprints to describe or identify non-conformance.Responsibilities:???Utilize hand tools, power tools and hardware to assemble and wire standard and engineered products to customer specifications and quality standards with the aid of supervision or trainers.???Apply acquired trade skills such as electrical, mechanical and plumbing to complete assembly process.???Follow ISO procedures.???Perform job set-up by obtaining necessary/required parts, drawings, and schematics. Check for correctness of parts by referencing the bill of material. Read and interpret drawings and schematics.???Communicate with engineers, designers, and technicians to resolve assembly discrepancies.???Perform ongoing inspection of product during assembly and wiring process and prior to product???s shipment.???Lift and position assemblies. Operate overhead hoist/crane to assist with the lifting and control of moving/positioning of assembly.???Maintain a clean, safe, and orderly work area.???Set-up and performs Assembly Department operations with minimum supervision.???Familiar with mechanical and electromechanical components.???Thorough understanding of part prints (tolerances, symbols, etc.).???Perform checks for quality of parts and make adjustments as required.???Perform other duties as assigned.Working hours: 6:00 AM - 2:15 PMSkills:--Familiar with mechanical and electromechanical components--Able to read and interpret routings, bills of material, assembly drawings, work instructions and notes--Good motivation and communication skills--Problem solving skillsEducation:High SchoolExperience:1-4 yearsQualifications:???High School Diploma or equivalent???Entry level or 1-2 years of assembly experience ???Manual dexterity???Ability to work in a team setting???A positive can-do attitude???Refuse to be satisfied with average performance???Able to use hands or fingers, talk and hear, reach, bend, stoop, stand for long periods of time, reach over head???Able to lift up to 50 lbs DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $16.00 - $17.00 per hour
      • 5:00 AM - 3:10 PM
      Perform sub assembly and final assembly processes on a variety of mechanical and electrical assemblies. Will use calibrated equipment and machinery, engineering and simple drawings, schematics, as well as written and verbal instructions to perform basic assembly, mechanical, and electrical functions. Will also maintain documentation on work performed, match work procedures with ISO documents, and read and interpret sketches and/or blueprints to describe or identify non-conformance.Responsibilities:???Utilize hand tools, power tools and hardware to assemble and wire standard and engineered products to customer specifications and quality standards with the aid of supervision or trainers.???Apply acquired trade skills such as electrical, mechanical and plumbing to complete assembly process.???Follow ISO procedures.???Perform job set-up by obtaining necessary/required parts, drawings, and schematics. Check for correctness of parts by referencing the bill of material. Read and interpret drawings and schematics.???Communicate with engineers, designers, and technicians to resolve assembly discrepancies.???Perform ongoing inspection of product during assembly and wiring process and prior to product???s shipment.???Lift and position assemblies. Operate overhead hoist/crane to assist with the lifting and control of moving/positioning of assembly.???Maintain a clean, safe, and orderly work area.???Set-up and performs Assembly Department operations with minimum supervision.???Familiar with mechanical and electromechanical components.???Thorough understanding of part prints (tolerances, symbols, etc.).???Perform checks for quality of parts and make adjustments as required.???Perform other duties as assigned.Working hours: 5:00 AM - 3:10 PMSkills:--Familiar with mechanical and electromechanical components--Able to read and interpret routings, bills of material, assembly drawings, work instructions and notes--Good motivation and communication skills--Problem solving skillsEducation:High SchoolExperience:0-1 yearsQualifications:???High School Diploma or equivalent???Entry level or 1-2 years of assembly experience ???Manual dexterity???Ability to work in a team setting???A positive can-do attitude???Refuse to be satisfied with average performance???Able to use hands or fingers, talk and hear, reach, bend, stoop, stand for long periods of time, reach over head???Able to lift up to 50 lbs DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Perform sub assembly and final assembly processes on a variety of mechanical and electrical assemblies. Will use calibrated equipment and machinery, engineering and simple drawings, schematics, as well as written and verbal instructions to perform basic assembly, mechanical, and electrical functions. Will also maintain documentation on work performed, match work procedures with ISO documents, and read and interpret sketches and/or blueprints to describe or identify non-conformance.Responsibilities:???Utilize hand tools, power tools and hardware to assemble and wire standard and engineered products to customer specifications and quality standards with the aid of supervision or trainers.???Apply acquired trade skills such as electrical, mechanical and plumbing to complete assembly process.???Follow ISO procedures.???Perform job set-up by obtaining necessary/required parts, drawings, and schematics. Check for correctness of parts by referencing the bill of material. Read and interpret drawings and schematics.???Communicate with engineers, designers, and technicians to resolve assembly discrepancies.???Perform ongoing inspection of product during assembly and wiring process and prior to product???s shipment.???Lift and position assemblies. Operate overhead hoist/crane to assist with the lifting and control of moving/positioning of assembly.???Maintain a clean, safe, and orderly work area.???Set-up and performs Assembly Department operations with minimum supervision.???Familiar with mechanical and electromechanical components.???Thorough understanding of part prints (tolerances, symbols, etc.).???Perform checks for quality of parts and make adjustments as required.???Perform other duties as assigned.Working hours: 5:00 AM - 3:10 PMSkills:--Familiar with mechanical and electromechanical components--Able to read and interpret routings, bills of material, assembly drawings, work instructions and notes--Good motivation and communication skills--Problem solving skillsEducation:High SchoolExperience:0-1 yearsQualifications:???High School Diploma or equivalent???Entry level or 1-2 years of assembly experience ???Manual dexterity???Ability to work in a team setting???A positive can-do attitude???Refuse to be satisfied with average performance???Able to use hands or fingers, talk and hear, reach, bend, stoop, stand for long periods of time, reach over head???Able to lift up to 50 lbs DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Midland, Michigan
      • Temp to Perm
      • $12.00 - $15.00 per hour
      • 3:30 PM - 2:00 AM (Various Shifts Available)
      A Midland metal manufacturer is seeking Paint Line Helpers and Assemblers to join their team! Shifts available: 1st shift (5:30am-4:00pm) & 2nd shift (3:30pm-2:00am). Starting compensation is $12/hr (days, $13/hr on nights). Scheduled increases are set for 180-hour increments capping at $14/hr for 1st shift and $15/hr for 2nd shift. This is a temp-hire opportunity for those interested in getting their foot in the door with a stable and growing local Midland company! Insurance benefits and profit sharing/ retirement are available after hire!Responsibilities:Hanging parts on the paint line with hooks as directed; Parts may range from 0-50Lbs and occasionally involve a team lift.Removing parts from the paint line and stacking carefully by different parts groups to avoid damage to the paint.Assembly of components into finished products. Assembly may including wiring or electrical components.Carefully inspecting the components as they are assembled for relevant defects and to ensure they are the correct components needed for the job.Palletizing and completing table orders and wrapping them prior to moving them to the staging area for shipmentAfter more seniority, an Assembly Worker may also work inside the paint booth with a paint gun to apply powder-coating material as the parts move through the paint line process. Company provides a paint suit and respirator for this work and will train on how to properly use a paint gun sprayer.Various other duties as needed and directed including unwrapping parts as they arrive, sorting them, and stocking various work stations and storage areas; Maintaining a clean and organized work area to promote safety.Skills:Ability to remain on feet for 10-hour shift with regular bending, stooping, twisting, lifting, and carrying up to 50Lbs (team lefts in excess of 50Lbs)Ability to follow verbal and written directions wellAbility to work well with a teamAbility to train to work within the paint booth and learn how to apply powder coat properly after some other initial training is completeQualifications:Must comply with Spherion's Drug Free Workplace Policy and disclose relevant criminal history at the time of hireMust be able to handle physical nature of job (regular lifting up to 50Lbs)Must have reliable transportationAre you looking for consistent full-time work in Midland? Check out this CLEAN metal shop and jump-start your career today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      A Midland metal manufacturer is seeking Paint Line Helpers and Assemblers to join their team! Shifts available: 1st shift (5:30am-4:00pm) & 2nd shift (3:30pm-2:00am). Starting compensation is $12/hr (days, $13/hr on nights). Scheduled increases are set for 180-hour increments capping at $14/hr for 1st shift and $15/hr for 2nd shift. This is a temp-hire opportunity for those interested in getting their foot in the door with a stable and growing local Midland company! Insurance benefits and profit sharing/ retirement are available after hire!Responsibilities:Hanging parts on the paint line with hooks as directed; Parts may range from 0-50Lbs and occasionally involve a team lift.Removing parts from the paint line and stacking carefully by different parts groups to avoid damage to the paint.Assembly of components into finished products. Assembly may including wiring or electrical components.Carefully inspecting the components as they are assembled for relevant defects and to ensure they are the correct components needed for the job.Palletizing and completing table orders and wrapping them prior to moving them to the staging area for shipmentAfter more seniority, an Assembly Worker may also work inside the paint booth with a paint gun to apply powder-coating material as the parts move through the paint line process. Company provides a paint suit and respirator for this work and will train on how to properly use a paint gun sprayer.Various other duties as needed and directed including unwrapping parts as they arrive, sorting them, and stocking various work stations and storage areas; Maintaining a clean and organized work area to promote safety.Skills:Ability to remain on feet for 10-hour shift with regular bending, stooping, twisting, lifting, and carrying up to 50Lbs (team lefts in excess of 50Lbs)Ability to follow verbal and written directions wellAbility to work well with a teamAbility to train to work within the paint booth and learn how to apply powder coat properly after some other initial training is completeQualifications:Must comply with Spherion's Drug Free Workplace Policy and disclose relevant criminal history at the time of hireMust be able to handle physical nature of job (regular lifting up to 50Lbs)Must have reliable transportationAre you looking for consistent full-time work in Midland? Check out this CLEAN metal shop and jump-start your career today!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $55,000 - $70,000 per year
      • 7:00 AM - 4:00 PM
      Develops systems and documentation for specific programs that ensure that products and services provided meet all contractual and program quality requirements.Responsibilities: Participates in the review of design, manufacturing, and test documentation to ensure that applicable program or contract quality requirements are met. Reviews the program quality performance to provide analysis and obtains corrective actions where necessary. Participates in the generation of program-specific quality and test philosophies to ensure compliance with company and customer requirements. Participates in the review of customer or contractual documentation (including proposals) to identify and ensure fulfillment of requirements. Provides interface and support to customer quality concerns to facilitate responsiveness to customers. Establishes and maintains the program quality system plan and documentation to ensure compliance with program requirements. Provides technical and advisory support to the prototype area to ensure the development of products in a manner that produces a quality system and documentation which will provide adherence to customer requirements. Dispositions discrepant material in a manner that ensures product quality and adherence to program requirements. Performs program-specific tasks as required (e.g., customer-required First Article Inspection, PPAP, APQP, PFMEA, SPC, Qualification Test Failure Analysis, etc.) to ensure compliance to individual program requirements. Devises, establishes, and maintains a reporting system for program quality to provide visibility internally and for the customer.Working hours: 7:00 AM - 4:00 PMSkills:--Effective negotiator with track record of accomplishment--Understanding of company/manufacturing big picture and objectives--Computer skills and experience (Microsoft Office Suite, Inspection Expert, Minitab, PiWeb, etc.)--Excellent communication skills (verbal, written and electronic)--Ability to work in a team setting--Attention to detail, well organized and self-motivatedEducation:BachelorsExperience:1-4 yearsQualifications: Bachelors degree in mechanical or electrical engineering or related subject is desired. Associate Degree with three years of quality experience in a manufacturing setting is acceptable Working knowledge of GD&T Lean Background a plus Requires passing a pre-employment screening DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Develops systems and documentation for specific programs that ensure that products and services provided meet all contractual and program quality requirements.Responsibilities: Participates in the review of design, manufacturing, and test documentation to ensure that applicable program or contract quality requirements are met. Reviews the program quality performance to provide analysis and obtains corrective actions where necessary. Participates in the generation of program-specific quality and test philosophies to ensure compliance with company and customer requirements. Participates in the review of customer or contractual documentation (including proposals) to identify and ensure fulfillment of requirements. Provides interface and support to customer quality concerns to facilitate responsiveness to customers. Establishes and maintains the program quality system plan and documentation to ensure compliance with program requirements. Provides technical and advisory support to the prototype area to ensure the development of products in a manner that produces a quality system and documentation which will provide adherence to customer requirements. Dispositions discrepant material in a manner that ensures product quality and adherence to program requirements. Performs program-specific tasks as required (e.g., customer-required First Article Inspection, PPAP, APQP, PFMEA, SPC, Qualification Test Failure Analysis, etc.) to ensure compliance to individual program requirements. Devises, establishes, and maintains a reporting system for program quality to provide visibility internally and for the customer.Working hours: 7:00 AM - 4:00 PMSkills:--Effective negotiator with track record of accomplishment--Understanding of company/manufacturing big picture and objectives--Computer skills and experience (Microsoft Office Suite, Inspection Expert, Minitab, PiWeb, etc.)--Excellent communication skills (verbal, written and electronic)--Ability to work in a team setting--Attention to detail, well organized and self-motivatedEducation:BachelorsExperience:1-4 yearsQualifications: Bachelors degree in mechanical or electrical engineering or related subject is desired. Associate Degree with three years of quality experience in a manufacturing setting is acceptable Working knowledge of GD&T Lean Background a plus Requires passing a pre-employment screening DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Mankato, Minnesota
      • Permanent
      • $25.00 - $32.00 per hour
      • 3:00 PM - 1:00 PM
      GREAT OPPORTUNITY & GREAT PAY RATE ALERT! Spherion is partnering with the premier manufacturer of underground and overhead cable installation tools and equipment for the IT, telecom and electric power industries. To keep their business thriving, they are in need of 2nd shift CNC Machinists -- DIRECT HIRE, right here on Mankato on 2nd shift!There is no probationary period here, start IMMEDIATELY on the clients payroll and take on these GREAT BENEFITS:- Current Hiring Bonus of $7,500- Medical - 75% employee premium paid by Company- Dental - 100% employee premium paid by Company- Vision - 100% employee premium paid by Company- Generous Paid Time Off & 9 Paid Holidays- Life Insurance - 100% employee premium paid by Company- Generous Tuition Plans- Attendance Bonus - be paid for coming to work- Retention Bonus - receive a bonus for stay with usResponsibilities:Set up and operate equipment to efficiently perform job.Understand the use of measuring tools and the calibration requirements.Offer input on how to improve the operations.Record how much time is spent on each job.Modify CNC programs as needed.Must understand use of different cutters and possess ability to determine correct feeds and speeds for those cutters.Produces acceptable number of parts in established time frames.Check finished dimensions to four place tolerance.Follow the daily production schedule.Follow the guidelines for the verification system.Maintain a clean and orderly work area.Comply with state and federal law safety regulations in addition to safety and operational procedures.Adhere to company policies and state and federal laws and regulations relating to employment, including promoting a workplace free of discrimination and harassment.Other related duties as assigned.Working hours: 3:00 PM - 1:00 PMSkills:Knowledge of tool layout and set up of raw material.Sufficient math skills required to compute radii, bolt circles, and other dimensions.Ability to read and interpret blueprints and schematics.Strong understanding and adherence to safety guidelines.Education:High SchoolExperience:0-1 yearsQualifications:Successfully pass pre-employment background check, drug test & physicalAbility to work overtime as neededAbility to follow safety rules and work in proactively safe manner at all times WHO WANTS THAT $7500? APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      GREAT OPPORTUNITY & GREAT PAY RATE ALERT! Spherion is partnering with the premier manufacturer of underground and overhead cable installation tools and equipment for the IT, telecom and electric power industries. To keep their business thriving, they are in need of 2nd shift CNC Machinists -- DIRECT HIRE, right here on Mankato on 2nd shift!There is no probationary period here, start IMMEDIATELY on the clients payroll and take on these GREAT BENEFITS:- Current Hiring Bonus of $7,500- Medical - 75% employee premium paid by Company- Dental - 100% employee premium paid by Company- Vision - 100% employee premium paid by Company- Generous Paid Time Off & 9 Paid Holidays- Life Insurance - 100% employee premium paid by Company- Generous Tuition Plans- Attendance Bonus - be paid for coming to work- Retention Bonus - receive a bonus for stay with usResponsibilities:Set up and operate equipment to efficiently perform job.Understand the use of measuring tools and the calibration requirements.Offer input on how to improve the operations.Record how much time is spent on each job.Modify CNC programs as needed.Must understand use of different cutters and possess ability to determine correct feeds and speeds for those cutters.Produces acceptable number of parts in established time frames.Check finished dimensions to four place tolerance.Follow the daily production schedule.Follow the guidelines for the verification system.Maintain a clean and orderly work area.Comply with state and federal law safety regulations in addition to safety and operational procedures.Adhere to company policies and state and federal laws and regulations relating to employment, including promoting a workplace free of discrimination and harassment.Other related duties as assigned.Working hours: 3:00 PM - 1:00 PMSkills:Knowledge of tool layout and set up of raw material.Sufficient math skills required to compute radii, bolt circles, and other dimensions.Ability to read and interpret blueprints and schematics.Strong understanding and adherence to safety guidelines.Education:High SchoolExperience:0-1 yearsQualifications:Successfully pass pre-employment background check, drug test & physicalAbility to work overtime as neededAbility to follow safety rules and work in proactively safe manner at all times WHO WANTS THAT $7500? APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $17.00 - $21.00 per hour
      • 6:00 AM - 3:15 PM
      Set-up and operate numerically controlled machine tools with single and/or multiple spindles in a safe manner. Monitor and control the quality of machining processes by utilizing process control tools such as; control charts and statistical process controls. Maintain the production processes and work within the expected efficiencies that are established for the product.Responsibilities:?? Read blueprints, drawings, specifications and shop orders for all manufactured parts. i.e., dimensions, tolerances, inspection, number of parts to be machined and tooling instructions such as; cutting speeds, feed rates, depth of cuts, and cutting tools required.?? Use machine controls to cycle machine through; production operations, set-up, adjusting tool positions, and changing tools. Review machine operating criteria such as cycle time and spindle rpm.?? Change, position and secure tools in tool holders by utilizing tool monitoring system and presetting equipment. ?? Perform first piece sample inspection according to the operation control plan. By utilizing qualified measuring devices, the machinist monitors the part dimensions through continuous checking of part features and process control tools (such as SPC).?? Maintain all lubricants and coolants on the machine that are used in daily operation.?? Keep work area clean.?? Punching, employing recognized tooling and procedures where tolerances are close.?? Assist lower-level operators to develop skills and to produce production parts to spec.?? Operates all common machine shop equipment and hand tools skillfully.?? Machine set up, adjustments and check out programming and operates machines to perform a series of progressive machining operations to exact tolerances and finish specifications requiring considerable skill.?? Sets up machines for less skills machine operators.?? Produces precision items beyond the capabilities of production machine operators.?? Oversees production area to make sure machine operators are sweeping daily, disposing of scrap properly, and maintaining the workplace in a safe and orderly manner.Periodically may be off-site for installation of equipmentWorking hours: 6:00 AM - 3:15 PMSkills:- Requires a thorough knowledge of advanced shop mathematics, inspection processes, and precision measuring instruments- Requires a thorough knowledge of machine shop practices and production methodsEducation:High SchoolExperience:1-4 yearsQualifications:?? Requires a high school diploma?? Requires passing pre-employment screening, including a drug screen Call to Action: DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Set-up and operate numerically controlled machine tools with single and/or multiple spindles in a safe manner. Monitor and control the quality of machining processes by utilizing process control tools such as; control charts and statistical process controls. Maintain the production processes and work within the expected efficiencies that are established for the product.Responsibilities:?? Read blueprints, drawings, specifications and shop orders for all manufactured parts. i.e., dimensions, tolerances, inspection, number of parts to be machined and tooling instructions such as; cutting speeds, feed rates, depth of cuts, and cutting tools required.?? Use machine controls to cycle machine through; production operations, set-up, adjusting tool positions, and changing tools. Review machine operating criteria such as cycle time and spindle rpm.?? Change, position and secure tools in tool holders by utilizing tool monitoring system and presetting equipment. ?? Perform first piece sample inspection according to the operation control plan. By utilizing qualified measuring devices, the machinist monitors the part dimensions through continuous checking of part features and process control tools (such as SPC).?? Maintain all lubricants and coolants on the machine that are used in daily operation.?? Keep work area clean.?? Punching, employing recognized tooling and procedures where tolerances are close.?? Assist lower-level operators to develop skills and to produce production parts to spec.?? Operates all common machine shop equipment and hand tools skillfully.?? Machine set up, adjustments and check out programming and operates machines to perform a series of progressive machining operations to exact tolerances and finish specifications requiring considerable skill.?? Sets up machines for less skills machine operators.?? Produces precision items beyond the capabilities of production machine operators.?? Oversees production area to make sure machine operators are sweeping daily, disposing of scrap properly, and maintaining the workplace in a safe and orderly manner.Periodically may be off-site for installation of equipmentWorking hours: 6:00 AM - 3:15 PMSkills:- Requires a thorough knowledge of advanced shop mathematics, inspection processes, and precision measuring instruments- Requires a thorough knowledge of machine shop practices and production methodsEducation:High SchoolExperience:1-4 yearsQualifications:?? Requires a high school diploma?? Requires passing pre-employment screening, including a drug screen Call to Action: DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $17.00 - $22.00 per hour
      • 3:00 PM - 11:15 PM
      Set-up and operate numerically controlled machine tools with single and/or multiple spindles in a safe manner. Monitor and control the quality of machining processes by utilizing process control tools such as; control charts and statistical process controls. Maintain the production processes and work within the expected efficiencies that are established for the product.Responsibilities:???Read blueprints, drawings, specifications and shop orders for all manufactured parts. i.e., dimensions, tolerances, inspection, number of parts to be machined and tooling instructions such as; cutting speeds, feed rates, depth of cuts, and cutting tools required.???Use machine controls to cycle machine through; production operations, set-up, adjusting tool positions, and changing tools. Also to review machine operating criteria such as cycle time and spindle rpm.???Change, position and secure tools in tool holders by utilizing tool monitoring system and presetting equipment.???Perform first piece sample inspection according to the operation control plan. By utilizing qualified measuring devices, the machinist monitors the part dimensions through continuous checking of part features and process control tools (such as SPC).???Maintain all lubricants and coolants on the machine that are used in daily operation.???Keep work area clean.???Punching, employing recognized tooling and procedures where tolerances are close.???Assist lower-level operators to develop skills and to produce production parts to spec.???Operates all common machine shop equipment and hand tools skillfully.???Machine set up, adjustments and check out programming and operates machines to perform a series of progressive machining operations to exact tolerances and finish specifications requiring considerable skill.???Sets up machines for less skills machine operators.???Produces precision items beyond the capabilities of production machine operators.Oversees production area to make sure machine operators are sweeping daily, disposing of scrap properly, and maintaining the workplace in a safe and orderlyWorking hours: 3:00 PM - 11:15 PMSkills:--The machinist is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, sit, stoop, kneel or crouch.--The machinist must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.--Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.--Individuals will work near moving mechanical parts of machinery and electrically activated devices.--Individuals are occasionally exposed to airborne particles.--Perform math skills of addition, subtraction, multiplication, and division.--Knowledge of decimals, fractions, and metric/English conversions--Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture.--Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.--Using a specified training format, work closely in training new machinists.--Other duties as assigned.Education:High SchoolExperience:1-4 yearsQualifications:???Overtime is typically voluntary. However, during busy production periods overtime will be required.???Requires passing a pre-employment screening, which includes a drug screen.???Requires a high school diploma or equivalent and must be 18 years of age or older. DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Set-up and operate numerically controlled machine tools with single and/or multiple spindles in a safe manner. Monitor and control the quality of machining processes by utilizing process control tools such as; control charts and statistical process controls. Maintain the production processes and work within the expected efficiencies that are established for the product.Responsibilities:???Read blueprints, drawings, specifications and shop orders for all manufactured parts. i.e., dimensions, tolerances, inspection, number of parts to be machined and tooling instructions such as; cutting speeds, feed rates, depth of cuts, and cutting tools required.???Use machine controls to cycle machine through; production operations, set-up, adjusting tool positions, and changing tools. Also to review machine operating criteria such as cycle time and spindle rpm.???Change, position and secure tools in tool holders by utilizing tool monitoring system and presetting equipment.???Perform first piece sample inspection according to the operation control plan. By utilizing qualified measuring devices, the machinist monitors the part dimensions through continuous checking of part features and process control tools (such as SPC).???Maintain all lubricants and coolants on the machine that are used in daily operation.???Keep work area clean.???Punching, employing recognized tooling and procedures where tolerances are close.???Assist lower-level operators to develop skills and to produce production parts to spec.???Operates all common machine shop equipment and hand tools skillfully.???Machine set up, adjustments and check out programming and operates machines to perform a series of progressive machining operations to exact tolerances and finish specifications requiring considerable skill.???Sets up machines for less skills machine operators.???Produces precision items beyond the capabilities of production machine operators.Oversees production area to make sure machine operators are sweeping daily, disposing of scrap properly, and maintaining the workplace in a safe and orderlyWorking hours: 3:00 PM - 11:15 PMSkills:--The machinist is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, sit, stoop, kneel or crouch.--The machinist must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.--Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.--Individuals will work near moving mechanical parts of machinery and electrically activated devices.--Individuals are occasionally exposed to airborne particles.--Perform math skills of addition, subtraction, multiplication, and division.--Knowledge of decimals, fractions, and metric/English conversions--Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture.--Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.--Using a specified training format, work closely in training new machinists.--Other duties as assigned.Education:High SchoolExperience:1-4 yearsQualifications:???Overtime is typically voluntary. However, during busy production periods overtime will be required.???Requires passing a pre-employment screening, which includes a drug screen.???Requires a high school diploma or equivalent and must be 18 years of age or older. DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $21.00 - $29.00 per hour
      • 3:00 PM - 10:15 PM
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment.Responsibilities:???Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.???Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.???Fabricate components from blueprints and verbal instructions.???Perform assignments in accordance with written quality procedures.???Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.???Ensure compliance to safety rules and procedures.Working hours: 3:00 PM - 10:15 PMSkills:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Education:DoctorateExperience:1-4 yearsQualifications:???The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.???The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.???Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.???Individuals will work near moving mechanical parts of machinery and electrically activated devices. ???Individuals are occasionally exposed to airborne particles.Perform math skills of addition, subtraction, multiplication, and division???Knowledge of decimals, fractions, and metric/English conversions???Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new welders???Lift and position parts into fixtures???Employment is contingent upon the results of a pre-employment drug examination. DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment.Responsibilities:???Mark-up incorrect drawings and bills of material, submit to engineering and plan for change.???Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions.???Fabricate components from blueprints and verbal instructions.???Perform assignments in accordance with written quality procedures.???Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects.???Ensure compliance to safety rules and procedures.Working hours: 3:00 PM - 10:15 PMSkills:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Education:DoctorateExperience:1-4 yearsQualifications:???The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.???The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.???Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices.???Individuals will work near moving mechanical parts of machinery and electrically activated devices. ???Individuals are occasionally exposed to airborne particles.Perform math skills of addition, subtraction, multiplication, and division???Knowledge of decimals, fractions, and metric/English conversions???Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new welders???Lift and position parts into fixtures???Employment is contingent upon the results of a pre-employment drug examination. DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will
      • Albert Lea, Minnesota
      • Permanent
      • $19.00 - $21.00 per hour
      • 3:00 PM - 11:15 PM
      Set-up and operate fabrication machines and tools in a safe manner. Monitor and control the quality of products using equipment and customer specifications. Maintain the production processes and work within the expected efficiencies that are established for the product.Responsibilities: Operator various fabrication machining including laser, brake press, saw, and spot weld as needed. Read blueprints, drawings, specifications and shop orders for all manufactured parts. i.e., dimensions, tolerances, inspection, number of parts to be machined and tooling instructions such as; cutting speeds, feed rates, depth of cuts, and cutting tools required. Set up equipment and machines per specifications. Change, position and secure tools in tool holders by utilizing tool monitoring system and presetting equipment.  Maintain machines that are used in daily operation. Keep work area clean. Assist and mentor less experienced operators to develop skills and to produce production parts to spec. Operates all common machine shop equipment and hand tools skillfully. Sets up machines for less skills machine operators. Produces precision items beyond the capabilities of production machine operators. Oversees production area to make sure machine operators are sweeping daily, disposing of scrap properly, and maintaining the workplace in a safe and orderly manner.Working hours: 3:00 PM - 11:15 PMSkills:- The machinist is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, sit, stoop, kneel or crouch.- The machinist must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. - Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices. - Individuals will work near moving mechanical parts of machinery and electrically activated devices. - Individuals are occasionally exposed to airborne particles.- Perform math skills of addition, subtraction, multiplication, and division.- Knowledge of decimals, fractions, and metric/English conversions- Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture. - Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.- Using a specified training format, work closely in training new machinists.- Other duties as assigned.Education:High SchoolExperience:1-4 yearsQualifications: Overtime is typically voluntary. However, during busy production periods overtime will be required. Requires passing a pre-employment screening, drug screen included DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Set-up and operate fabrication machines and tools in a safe manner. Monitor and control the quality of products using equipment and customer specifications. Maintain the production processes and work within the expected efficiencies that are established for the product.Responsibilities: Operator various fabrication machining including laser, brake press, saw, and spot weld as needed. Read blueprints, drawings, specifications and shop orders for all manufactured parts. i.e., dimensions, tolerances, inspection, number of parts to be machined and tooling instructions such as; cutting speeds, feed rates, depth of cuts, and cutting tools required. Set up equipment and machines per specifications. Change, position and secure tools in tool holders by utilizing tool monitoring system and presetting equipment.  Maintain machines that are used in daily operation. Keep work area clean. Assist and mentor less experienced operators to develop skills and to produce production parts to spec. Operates all common machine shop equipment and hand tools skillfully. Sets up machines for less skills machine operators. Produces precision items beyond the capabilities of production machine operators. Oversees production area to make sure machine operators are sweeping daily, disposing of scrap properly, and maintaining the workplace in a safe and orderly manner.Working hours: 3:00 PM - 11:15 PMSkills:- The machinist is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, sit, stoop, kneel or crouch.- The machinist must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. - Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices. - Individuals will work near moving mechanical parts of machinery and electrically activated devices. - Individuals are occasionally exposed to airborne particles.- Perform math skills of addition, subtraction, multiplication, and division.- Knowledge of decimals, fractions, and metric/English conversions- Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture. - Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process.- Using a specified training format, work closely in training new machinists.- Other duties as assigned.Education:High SchoolExperience:1-4 yearsQualifications: Overtime is typically voluntary. However, during busy production periods overtime will be required. Requires passing a pre-employment screening, drug screen included DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      • Albert Lea, Minnesota
      • Permanent
      • $19.00 - $29.00 per hour
      • 5:00 AM - 3:10 PM
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment.Responsibilities: Mark-up incorrect drawings and bills of material, submit to engineering and plan for change. Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions. Fabricate components from blueprints and verbal instructions. Perform assignments in accordance with written quality procedures. Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects. Ensure compliance to safety rules and procedures.Working hours: 5:00 AM - 3:10 PMSkills:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Education:High SchoolExperience:1-4 yearsQualifications: The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch. The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices. Individuals will work near moving mechanical parts of machinery and electrically activated devices.  Individuals are occasionally exposed to airborne particles.Perform math skills of addition, subtraction, multiplication, and division Knowledge of decimals, fractions, and metric/English conversions Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new welders Lift and position parts into fixtures Employment is contingent upon the results of a pre-employment drug examination. DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness!
      Variety of welding processes utilizing mig, tig, robotic, and gas applications. Welds commonly used metals and alloys of various shapes, sizes, thicknesses, etc. Selects welding electrodes for specific welds to ensure penetration and fusion of base and filler metals. Welds metal components together to fabricate or repair products according to blue prints, layouts, or work orders. Welds in vertical, horizontal, and overhead positions. Working knowledge of welding materials and equipment.Responsibilities: Mark-up incorrect drawings and bills of material, submit to engineering and plan for change. Communicate with engineers and designers on problems regarding production tools. Fabricate components from blueprints and verbal instructions. Fabricate components from blueprints and verbal instructions. Perform assignments in accordance with written quality procedures. Uses cutting torches, grinders, etc. and similar metal working equipment to complete welding projects. Ensure compliance to safety rules and procedures.Working hours: 5:00 AM - 3:10 PMSkills:Entry level welder. Works with close supervision and relies on both blue prints and fixtures to meet any cosmetic specs to any internal or external customer requirements. Required to fill out necessary paperwork More advanced welding includes operating of two types of welding equipment and passing internal leak tests within testing capacity. These welders should have the ability to setup and weld using fixtures and prints, capacity to understand weld symbols and required to weld a minimum of two types of material. Understand and use documentation of welding procedures and setup sheets.Certified welders would weld with a variety of equipment, mig, tig or gas. They may also be required to fabricate parts with no fixtures but have access to prints. Required to have the capacity to trouble shoot and operate complex fixtures and weld a large variety of materials such as aluminum, stainless steel, mild steel, galvanized and brass, etc. along with training of other welders.Education:High SchoolExperience:1-4 yearsQualifications: The welder is required to be on their feet for up to twelve hours using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch. The welder must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus on optical devices. Individuals will work near moving mechanical parts of machinery and electrically activated devices.  Individuals are occasionally exposed to airborne particles.Perform math skills of addition, subtraction, multiplication, and division Knowledge of decimals, fractions, and metric/English conversions Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process. Using a specified training format, work closely in training new welders Lift and position parts into fixtures Employment is contingent upon the results of a pre-employment drug examination. DIRECT HIRE position with a 100% employee owned company that has been voted BEST PLACE TO WORK many times! BENEFITS! BENEFITS! BENEFITS! Medical & Short-Term Disability, HRA, FREE CLINIC, Long Term Disability & Life Insurance, PTO, Vacation, Sick Time, Tuition Reimbursement, Paid Holidays, 401K and ESOP, non-union, clean, SAFE and friendly environment, and more! APPLY TODAY!Spherion has helped thousands of people just like you find work happiness!
      • Mason City, Iowa
      • Permanent
      • $18.00 - $22.00 per hour
      • 6:10 AM - 3:45 PM
      Responsible for the manufacturing of printed labels while continuously monitoring label quality and press conditions. Meet safety, housekeeping, quality, scrap and productivity standards while meeting production schedules.Responsibilities:1. Completes make ready in accordance with the work order and Product Specification documents to ensure correct print cylinders, inks, substrates, tooling, and anilox rollers are used. 2. Responsible for completing all required quality checks related to product specifications, visual, and functional checks. Completes all press-side quality checks. 3. Operates press to produce product in accordance to customer specifications while maintain quality, waste, and press efficiency.4) Maintains consistent quality during the production run. Critical quality checks includes copy, color, and registration, and ink adhesion. Ensure conformance to all other quality checks5) Back up to HP Indigo, Crusader and Delta Laser6) Perform safe and effective operation of all operations7) Perform preventive and routine maintenance on schedule and according to procedures.8) Maintain a clean and orderly work environment.9) Evaluate and achieve optimum print quality.10) Systematically analyze and troubleshoot mechanical and print problems.11) Monitor and minimize downtime by making accurate and efficient press adjustments.12) Maintain effective use of raw material through effective machine and materials management.13) Verify proper job setup prior to printing to minimize errors and rework.14) Produce flexo printed samples as required for product and prototype testing.15) Assist in performing other duties for the work team or other teams as needed.16) Cross-train and work in other areas as requested17) Produce quality work in an efficient and timely manner to assist Metalcraft in meeting customer needs.18) Assist with the completion of all related standard work instructions, and quality measurementsWorking hours: 6:10 AM - 3:45 PMSkills:* Good computer skills * Experience with flexography printing desired * Experience with inkjet systems & variable imaging desired * Working knowledge of Webtron 750 Flexo press desiredEducation:High SchoolExperience:1-4 yearsQualifications:* Willingness to learn new methods and try new ideas * Willingness/ability to train others * Good manual dexterity and mechanical ability * Good interpersonal and communication skills * High attention to detail and good visual discrimination * Willingness to work flexible hours and overtime * Ability to lift 40 pounds * Ability to use measuring devices * Takes pride in producing a high-quality product * Ability to accurately match colors * High School including Basic Math This company is employee owned, and the culture reflects that! They are very laid back and casual (shorts & tennis shoes), with high expectations. Forgiving environment. They are committed to Training and growing you in your position. Much opportunity for growth and advancement rapid expansion. Very limited weekends. Very clean working conditions and bonus - Air Conditioned! Benefits: Employee Owned! Health Insurance, Dental, Vision, 401K, Profit Sharing, the best wellness Program around! They have a tissue therapist there every Tues and Thurs for increased mobility and strongly encourage participation.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
      Responsible for the manufacturing of printed labels while continuously monitoring label quality and press conditions. Meet safety, housekeeping, quality, scrap and productivity standards while meeting production schedules.Responsibilities:1. Completes make ready in accordance with the work order and Product Specification documents to ensure correct print cylinders, inks, substrates, tooling, and anilox rollers are used. 2. Responsible for completing all required quality checks related to product specifications, visual, and functional checks. Completes all press-side quality checks. 3. Operates press to produce product in accordance to customer specifications while maintain quality, waste, and press efficiency.4) Maintains consistent quality during the production run. Critical quality checks includes copy, color, and registration, and ink adhesion. Ensure conformance to all other quality checks5) Back up to HP Indigo, Crusader and Delta Laser6) Perform safe and effective operation of all operations7) Perform preventive and routine maintenance on schedule and according to procedures.8) Maintain a clean and orderly work environment.9) Evaluate and achieve optimum print quality.10) Systematically analyze and troubleshoot mechanical and print problems.11) Monitor and minimize downtime by making accurate and efficient press adjustments.12) Maintain effective use of raw material through effective machine and materials management.13) Verify proper job setup prior to printing to minimize errors and rework.14) Produce flexo printed samples as required for product and prototype testing.15) Assist in performing other duties for the work team or other teams as needed.16) Cross-train and work in other areas as requested17) Produce quality work in an efficient and timely manner to assist Metalcraft in meeting customer needs.18) Assist with the completion of all related standard work instructions, and quality measurementsWorking hours: 6:10 AM - 3:45 PMSkills:* Good computer skills * Experience with flexography printing desired * Experience with inkjet systems & variable imaging desired * Working knowledge of Webtron 750 Flexo press desiredEducation:High SchoolExperience:1-4 yearsQualifications:* Willingness to learn new methods and try new ideas * Willingness/ability to train others * Good manual dexterity and mechanical ability * Good interpersonal and communication skills * High attention to detail and good visual discrimination * Willingness to work flexible hours and overtime * Ability to lift 40 pounds * Ability to use measuring devices * Takes pride in producing a high-quality product * Ability to accurately match colors * High School including Basic Math This company is employee owned, and the culture reflects that! They are very laid back and casual (shorts & tennis shoes), with high expectations. Forgiving environment. They are committed to Training and growing you in your position. Much opportunity for growth and advancement rapid expansion. Very limited weekends. Very clean working conditions and bonus - Air Conditioned! Benefits: Employee Owned! Health Insurance, Dental, Vision, 401K, Profit Sharing, the best wellness Program around! They have a tissue therapist there every Tues and Thurs for increased mobility and strongly encourage participation.Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. No one works harder for you than Spherion. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Sexual Orientation, Gender Identity, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.

    Thank you for subscribing to your personalized job alerts.

    It looks like you want to switch your language. This will reset your filters on your current job search.